A varistor is the component that idles at almost nothing and conducts overwhelmingly when the voltage rises. It is a resistor whose resistance collapses along a power law: at the working voltage it draws a trickle; in a surge it clamps, taking the energy of the transient so the equipment behind it does not. The modern form is the metal-oxide varistor — an MOV of sintered zinc-oxide grains — standing across incoming power and signal lines in facilities of every kind, usually as the middle stage of a staged protection scheme: gas discharge tube, then MOV, then TVS.
This calculator works the device’s law, I = C·V^α, in both directions — the current at a stated voltage, or the voltage at a stated current — under the material state you select. The exponent α is a property of the material, and the books this tool is built from state it in bands: zinc oxide and legacy silicon carbide, each band named with its book. Every result is returned in the state it was computed in, with the static and dynamic resistance at the point — the dynamic resistance, R ÷ α, is the steepness that makes the clamp work. Two measured points from a device in hand recover its α and C directly, read against every documented band; and a second mode returns the varistor-mode conversion bound, η_max ≤ 1/N², for the same nonlinearity worked as a frequency converter.
Surge protection is part of the power foundation every communications service stands on — the panel, the rack, and the lines entering the building — which is where this tool sits in SolveForce’s work: Networks & Data Centers, the facility side of connectivity. The figures here are computed from the values you enter; a protection design for a specific facility — device ratings, coordination of the stages, the panel it lands in — is confirmed with a specialist for the site.



Ready when you are — run the numbers, or talk it through with a specialist.
Key terms in plain language
Open a term for a concise explanation of language used on this page.
VoIP
Voice over Internet Protocol carries phone calls over an IP network instead of a traditional analog phone line. Call quality depends on network stability, latency, and traffic management.
Unified Communications (UCaaS)
A cloud-based combination of business calling, messaging, meetings, presence, and collaboration tools managed as one communications service.
SIP Trunking
A service that connects a business phone system to the public telephone network using Internet Protocol, replacing or supplementing traditional phone lines.
Bandwidth
The amount of data a connection can carry in a given time, usually measured in Mbps or Gbps. More bandwidth supports more users, devices, and simultaneous applications.
Latency
The time it takes data to travel between two points. Lower latency improves voice, video meetings, cloud applications, gaming, and other real-time services.
Service-Level Agreement (SLA)
A provider’s written commitment covering service targets such as availability, response time, repair time, and sometimes financial credits when commitments are missed.