Common Electrical Component Terminology – SolveForce Cloud Computing & Telecommunications

AC motor: a type of motor that runs on alternating current, and can be used for a wide range of applications such as power generators, pumps, or as a power source for mechanical devices.
Accelerometer: a component that can be used to measure acceleration or tilt, and can be used for motion sensing, control, or other applications.
Accelerometer: a component that can be used to measure acceleration, can be used for motion sensing, navigation, or tilt sensing.
Accelerometer: a component that measures acceleration and can be used for detecting motion or orientation.
AC-DC converter: a component that can be used to convert AC power to DC power, can provide a stable voltage or current to a circuit or charge batteries.
AC-DC converter: a component that converts AC voltage to DC voltage, can be used for power conversion or rectification.
Actuator: a component that converts an electrical signal into a mechanical action, can be used for control of mechanical systems
ADC (Analog-to-Digital Converter): a component that can be used to convert an analog signal to a digital signal, can be used for data acquisition or signal processing.
Air pressure sensor: a component that can be used to measure the air pressure of an environment, can be used for weather forecasting or for monitoring altitude.
Amplifier: a component that can be used to increase the amplitude of a signal, can be used to improve signal strength or to drive a load.
Amplifier: a component that increases the strength of an electrical signal.
ASIC (Application-Specific Integrated Circuit): a type of integrated circuit designed to perform a specific function and is not reprogrammable, it can be used for high-performance or low-power applications.
Automatic transfer switch (ATS): a component that can be used to switch between two power sources automatically, can be used to provide redundancy or backup power.
Barcode reader: a component that can be used to read information encoded in barcodes, can be used for identification, tracking, or other applications.
Barometer: a component that can be used to measure atmospheric pressure, can be used for weather forecasting or for monitoring altitude.
Battery: a component that can be used to store and supply electrical energy, can be used as a power source for portable devices, vehicles, or other applications.
Battery: a component that stores chemical energy and converts it into electrical energy.
Binary-coded decimal counter: a type of counter that can count in BCD format.
Bluetooth module: a component that can be used to send and receive data over a short range wireless communication, can be used for wireless communication between devices or for remote control of devices.
Boost converter: a type of DC-DC converter that can be used to step up voltage levels.
Brushless DC motor: a type of electric motor that uses electronic commutation instead of brushes, can be used for high-efficiency and high-speed applications
Brushless DC motor: a type of motor that uses electronic commutation instead of brushes, can be used for a wide range of applications such as robotics, automation, or as a power source for mechanical devices.
Brushless servo motor: a type of servo motor that uses electronic commutation instead of brushes, can be used for precise motion control in robotics, automation, or other applications.
Brushless stepper motor: a type of stepper motor that uses electronic commutation instead of brushes, can be used for precise motion control in robotics, automation, or other applications.
Buck converter: a type of DC-DC converter that can be used to step down voltage levels.
Buck-boost converter: a type of DC-DC converter that can be used to step up or step down voltage levels.
Bullet Point List all Electrical Component Terminology and Related Definitions.
Bus: a component that connects multiple devices or components together and allows them to communicate with each other, can be used for data transfer or signal transmission.
Cable: a component that can be used to transmit electrical power or signals, can be used for power delivery, data transfer, or other applications.
Cable: a component that consists of one or more wires or conductors enclosed in a jacket or sheath, can be used to transmit electrical power or signals over a distance.
Capacitor: a component that can be used to store electrical energy in a circuit, can be used to smooth out voltage fluctuations, filter noise, or to temporarily store energy.
Capacitor: a component that can be used to store electrical energy, can be used to filter a signal, smooth a DC voltage, or to provide power to a circuit during an interruption of the input voltage.
Capacitor: a component that stores electrical charge and can be used to filter out unwanted signals or smooth out power supply fluctuations
Circuit breaker: a component that can be used to protect a circuit from overcurrent, can be used for safety and protection of electrical systems.
Circuit breaker: a safety component that automatically interrupts the flow of current in the event of an overload or short circuit.
Clamp diode: a component that can be used to protect a circuit from overvoltage, can be used to suppress voltage transients or to protect against electrostatic discharge.
Comparator: a type of circuit that can be used to compare two voltages or currents and output a digital signal indicating which one is higher.
Compass: a component that can be used to measure the direction of the magnetic field, can be used for navigation, control, or other applications.
Compass: a component that uses a magnetometer to detect the Earth’s magnetic field and can be used for determining direction or orientation.
Connector: a component that can be used to join two or more wires or circuits together, can be used for data transfer, power delivery, or other applications.
Connectors: a component that connects two or more conductors or devices and allowing them to be disconnected or connected as needed, can be used to join wires, circuits, devices, or equipment.
Converter: a component that can convert power from one form to another, can be used for voltage or frequency conversion, or for power factor correction.
Cooling fan: a component that helps dissipate heat from electronic devices by blowing air over them.
Counter: a type of circuit that can be used to keep track of the number of events, can be used to measure frequency or duration.
CPLD (Complex Programmable Logic Device): a type of integrated circuit that can be programmed to perform a wide range of digital functions, can be used for digital signal processing, data acquisition, or other specialized tasks.
CPLD (Complex Programmable Logic Device): similar to FPGA, a type of integrated circuit that can be reprogrammed to perform different logic functions, can be used for digital signal processing, data acquisition, or other control applications.
Current sensor: a component that can be used to measure the current flowing in a circuit, can be used for motor control, robotics, or other specialized tasks.
Current sensor: a component that measures the current flowing in a circuit.
DAC (Digital-to-Analog Converter): a component that can be used to convert a digital signal to an analog signal, can be used for signal generation or signal processing.
DC motor: a type of motor that runs on direct current, can be used for a wide range of applications such as robotics, automation, or as a power source for mechanical devices.
DC-AC converter: a component that can be used to convert DC power to AC power, can be used to provide a stable voltage or current to a circuit or to power electronic devices.
DC-AC converter: a component that converts DC voltage to AC voltage, can be used for power conversion or inversion.
DC-DC converter: a component that can be used to convert a DC voltage from one level to another, can be used to step up or step down voltage levels or to provide a stable voltage to a circuit.
DC-DC converter: a component that converts a DC voltage level to a different DC voltage level, can be used for voltage regulation or isolation.
Decade counter: a type of counter that can count in decimal digits.
Demultiplexer: a type of circuit that can be used to take a single input and route it to one of several outputs.
Diode: a component that allows current to flow in only one direction and is used to rectify AC power or protect against voltage spikes
Diode: a component that allows current to flow in only one direction, can be used to rectify AC power or to protect against voltage transients.
Diode: a component that can be used to control the direction of current flow in a circuit, can be used for rectification, voltage reference or protection against overvoltage.
DRAM (Dynamic Random Access Memory): a type of memory that requires a continuous power supply to retain data and can be used for main memory in computers or other devices.
DRAM (Dynamic Random Access Memory): a type of volatile memory that can be used to store data and programs, it requires refreshing and the data stored in it is lost when the power is turned off.
DSP (Digital Signal Processor): a type of integrated circuit that can be used to perform digital signal processing tasks, can be used for audio, video, or other signal processing applications.
DSP (Digital Signal Processor): a type of microprocessor that is optimized for digital signal processing tasks, can be used for audio, video, or other signal processing applications.
EEPROM (Electrically Erasable Programmable Read-Only Memory): a type of non-volatile memory that can be reprogrammed and retains data even when the power is turned off.
EEPROM (Electrically Erasable Programmable Read-Only Memory): a type of non-volatile memory that can be used to store data and programs, it can be reprogrammed multiple times and the data stored in it even after power is turned off.
E-Ink (Electronic Ink) display: a type of display that uses tiny microcapsules filled with ink to display text or images, can be used for displaying text, images or other information.
Embedded system: a type of system that combines hardware and software to perform a specific function, can be used for control, data processing, or other specialized tasks.
EMC (Electromagnetic Compatibility) filter: a component that can be used to reduce electromagnetic interference in a circuit, can be used to improve signal integrity or to comply with regulatory standards.
EMI (Electromagnetic Interference) filter: a component that can be used to reduce electromagnetic interference in a circuit, can be used to improve signal integrity or to comply with regulatory standards.
EMI/RFI filter: a component that helps prevent electromagnetic interference (EMI) or radio-frequency interference (RFI) from affecting the operation of a circuit.
Enclosure: a component that protects electronic devices from external factors such as dust, moisture, or mechanical damage, can be used to house electronic devices or equipment.
Encoder: a component that can be used to convert linear or angular motion into electrical signals, can be used for position sensing, speed sensing, or as a feedback mechanism in control systems.
Encoder: a component that can be used to measure the position or rotation of a shaft, can be used to provide feedback or to control the position of a motor.
Encoder: a component that converts a mechanical motion into an electrical signal, can be used for measuring position or speed of a rotating shaft
EPROM (Erasable Programmable Read-Only Memory): a type of non-volatile memory that can be used to store data and programs, it can be reprogrammed multiple times but the data stored in it can only be erased by exposing it to ultraviolet light.
Filter: a component that can be used to pass or block certain frequencies or signals in a circuit, can be used for signal processing, noise reduction, or other applications.
Filter: a component that can be used to remove unwanted frequencies from a signal, can be used to improve signal quality or to isolate specific frequencies.
Filters: a component that passes certain frequency of signal and blocks others.
Fingerprint reader: a component that can be used to read fingerprints for identification or authentication, can be used for security, access control, or other applications.
Flash memory: a type of non-volatile memory that can be reprogrammed and retain data even when the power is turned off, can be used for storage in electronic devices.
Flash memory: a type of non-volatile memory that can be used to store data and programs, it can be reprogrammed multiple times and the data stored in it even after power is turned off.
Flip-flop: a type of circuit that can be used to store a binary value, can be used as a memory element or a building block for more complex circuits.
FPC (Flexible Printed Circuit): a type of circuit board that uses a flexible substrate to connect components, can be used for flexible or bendable electronic devices.
FPGA (Field-Programmable Gate Array): a type of integrated circuit that can be programmed to perform a wide range of digital functions, can be used for digital signal processing, data acquisition, or other specialized tasks.
FPGA (Field-Programmable Gate Array): a type of integrated circuit that can be reprogrammed to perform different logic functions, can be used for digital signal processing, data acquisition, or other complex control applications.
Fuel cell: a component that can be used to convert chemical energy into electrical energy, can be used for powering electronic devices or for energy storage.
Fuel cell: a component that can convert chemical energy into electrical energy, can be used as a power source for vehicles, portable devices, or other applications.
Fuel cell: a component that converts chemical energy into electrical energy, can be used as a power source.
Full-wave bridge rectifier: a type of circuit that can be used to rectify AC power, can be used to convert AC power to DC power or to provide a stable voltage or current to a circuit.
Fuse: a component that can be used to protect a circuit from overcurrent, can be used for safety and protection of electrical systems.
Fuse: a safety component that will “break” or become an open circuit when the current exceeds a certain level, protecting the circuit from damage.
Gas sensor: a component that can be used to detect the presence or concentration of a specific gas, can be used for air quality monitoring, industrial process control or for detecting the presence of toxic or flammable gases.
Gas sensor: a component that can be used to measure the concentration of a specific gas in the environment, can be used for monitoring, control, or safety applications.
Generator: a component that can convert mechanical energy into electrical energy, can be used as a power source for vehicles, portable devices, or other applications.
Generator: a component that converts mechanical energy into electrical energy.
GPS (Global Positioning System) receiver: a component that can be used to determine the location and time information using signals from GPS satellites, can be used for navigation, tracking, or other applications.
GPS (Global Positioning System) receiver: a component that can be used to determine the location of a device using satellite signals, can be used for navigation or for tracking the location of a device.
GPS module: a component that uses satellite signals to determine the location and time of a device and can be used for navigation or location tracking.
Ground fault circuit interrupter (GFCI): a component that can be used to protect against electrical shock, can be used for safety and protection of electrical systems.
Ground fault circuit interrupter (GFCI): a safety component that can be used to detect and interrupt a ground fault, can be used to protect against electric shock or electrocution.
Ground: a reference point in an electrical circuit to which all other voltages are measured.
GSM (Global System for Mobile Communications) module: a component that can be used to send and receive data over a cellular network, can be used for wireless communication or for remote monitoring and control.
Gyroscope: a component that can be used to measure angular velocity or orientation, can be used for motion sensing, control, or other applications.
Gyroscope: a component that measures angular velocity and can be used for detecting rotation or orientation.
Gyroscopes: a component that can be used to measure angular velocity or orientation, can be used for navigation or for stabilizing systems.
Half-wave rectifier: a type of circuit that can be used to rectify AC power by only allowing one half of the wave to pass through, can be used to convert AC power to DC power or to provide a stable voltage or current to a circuit.
Hall effect sensor: a component that can be used to measure magnetic fields, can be used to detect the position or speed of a rotor, or to detect the presence of a magnet.
Hall Effect sensor: a component that detects the presence of a magnetic field and can be used for position or speed sensing
H-bridge: a type of circuit that can be used to control the direction and speed of a motor, can be used for motor control or for bidirectional power conversion.
Heat sink: a component that absorbs and dissipates heat generated by electronic devices, can be used to protect devices from overheating and prolong their lifespan.
HMI (Human-Machine Interface): a component that provides a visual interface for humans to interact with a machine or process, such as a touch screen or graphical display.
Humidity sensor: a component that can be used to measure the humidity of an environment, can be used for monitoring indoor air quality or for controlling humidity-dependent processes.
Humidity sensor: a component that can be used to measure the humidity of an environment, can be used for monitoring, control, or safety applications.
IGBT (Insulated-Gate Bipolar Transistor): a type of transistor that combines the characteristics of MOSFETs and BJTs, can be used as a switch or an amplifier in power electronic circuits.
Image sensor: a component that can be used to capture and convert light into digital signals, can be used for photography, imaging, or other applications.
Inductor: a component that can be used to store energy in a magnetic field, can be used to filter a signal, smooth a DC voltage, or to provide power to a circuit during an interruption of the input voltage.
Inductor: a component that can be used to store energy in a magnetic field, can be used to filter noise, create a time delay, or to block DC while allowing AC to pass.
Inductor: a component that resists changes in current and is used to filter out high-frequency signals or provide energy storage
Integrated Circuit (IC): a compact arrangement of transistors, diodes, and other components on a single piece of semiconductor material
Inverter: a component that can convert DC power into AC power, can be used for powering AC devices from a DC source, or for converting DC power from renewable energy sources.
Inverter: a type of DC-AC converter that can be used to convert DC power to AC power.
IoT (Internet of Things) device: a device that is connected to the internet and can collect and share data, can be used for monitoring, control and automation in different areas.
IR sensor: a component that can be used to detect infrared radiation, can be used for sensing temperature or proximity, or for remote control applications.
IR sensor: a component that detects infrared radiation and can be used for sensing temperature or proximity of an object.
Jumper wire: a short wire that can be used to make temporary connections between electronic devices or equipment, can be used to test or troubleshoot electronic devices or equipment.
Laser sensor: a component that uses a laser beam to detect the distance or presence of an object, can be used for measuring distance, speed or level.
LCD (Liquid Crystal Display): a type of display technology that uses liquid crystals to control the passage of light, can be used for displays in electronic devices.
LCD (Liquid Crystal Display): a type of display that uses liquid crystals to control the passage of light, can be used for displaying text, images or other information.
LDR (Light-Dependent Resistor): a component that can be used to detect light, can be used for light sensing or to control lighting.
LED (Light Emitting Diode): a type of diode that can emit light, can be used for indication, lighting, or optoelectronic applications.
LED (Light-Emitting Diode): a type of semiconductor device that emits light when a current is applied, can be used for lighting, displays, or indicator lights in electronic devices.
Light sensor: a component that can be used to measure the amount of light in an environment, can be used for lighting control, sensing, or other applications.
Li-ion battery: a type of rechargeable battery that can be used to power electronic devices, can be used for portable devices or for energy storage.
Linear actuator: an actuator that produces linear motion instead of rotary motion.
Linear regulator: a component that can be used to regulate the voltage or current of a circuit, can be used to provide a stable voltage or current to a circuit or to protect a circuit from overvoltage or overcurrent.
Load cell: a component that can be used to measure weight or force.
Logic gates: basic building blocks of digital circuits that perform Boolean logic operations such as AND, OR, NOT, NAND, NOR, XOR, and XNOR.
LoRa module: a component that can be used to send and receive data over long-range wireless communication, can be used for wireless communication between devices in a wide area network.
Magnetometer: a component that can be used to measure magnetic fields, can be used for navigation, sensing the earth’s magnetic field or for detecting the presence of a magnet.
MCU (Microcontroller Unit): a type of integrated circuit that contains a microprocessor, memory, and input/output peripherals on a single chip, can be used for control, data processing, or other specialized tasks in embedded systems.
MEMS (Micro-Electro-Mechanical Systems): a type of device that combines mechanical and electronic components on a small scale, can be used for sensing, actuation, or other micro-scale applications.
Microcontroller: a small computer-on-a-chip that can be used to control electronic devices and systems.
Microcontroller: a type of integrated circuit that contains a microprocessor, memory, and input/output peripherals on a single chip, can be used for control, data processing, or other specialized tasks in embedded systems.
Microprocessor: a type of integrated circuit that contains a CPU and memory on a single chip, can be used for control, data processing, or other computational tasks.
Motor controller IC: an integrated circuit that can be used to control the speed and direction of a motor, can be used for motor control, robotics, or other specialized tasks.
Motor controller: a component that can be used to control the speed and direction of a motor, can be used for motor control, robotics, or other specialized tasks.
Motor driver IC: an integrated circuit that can be used to control the speed and direction of a motor, can be used for motor control, robotics, or other specialized tasks.
Motor driver: a component that can be used to control the speed and direction of a motor, can be used for motor control, robotics, or other specialized tasks.
Motor: a component that can be used to convert electrical energy into mechanical energy, can be used to drive mechanical loads or to control the speed of a motor.
Motor: a component that converts electrical energy into mechanical energy.
Multi-meter: a device that can be used to measure various electrical parameters such as voltage, current, and resistance, can be used to test or troubleshoot electronic devices or equipment.
Multiplexer: a type of circuit that can be used to select one of several inputs and route it to a common output.
NFC (Near Field Communication) module: a component that can be used to send and receive data over a very short range, can be used for wireless communication or for data transfer between devices.
NFC (Near Field Communication) reader: a component that can be used to read information stored in NFC tags or cards, can be used for identification, tracking, or other applications.
OLED (Organic Light Emitting Diode) display: a type of display that uses OLEDs to emit light, can be used for displaying text, images or other information.
OLED (Organic Light Emitting Diode): a type of LED that uses organic materials to emit light, can be used for flexible displays, lighting, or other optoelectronic applications.
OLED (Organic Light-Emitting Diode): a type of display technology that uses organic materials to produce light, can be used for displays in electronic devices.
Op-amp (Operational Amplifier): a component that can be used to amplify a small signal, can be used for a wide range of applications such as signal processing, control systems, or signal conditioning.
Optocoupler: a component that uses an LED and a phototransistor to isolate and transfer electrical signals between circuits without direct electrical connection.
Oscillator: a component that can be used to generate a continuous or periodic signal, can be used as a clock source or to generate a test signal.
Oscillator: a component that generates a repetitive electrical signal.
PCB (Printed Circuit Board): a type of board that has conductive pathways etched onto its surface, can be used as the base for electronic devices or as a means of connecting components in a circuit.
PCB (Printed Circuit Board): a type of circuit board that uses conductive tracks etched onto its surface to connect components, can be used to create a wide range of electronic devices.
PCB assembly: the process of mounting and connecting components to a circuit board, can include steps such as soldering, surface-mount technology (SMT) or through-hole technology (THT)
PCB BOM (Bill of Materials): a list of the components used in a circuit board, including their part numbers, quantities, and other relevant information.
PCB CAD software: a software that can be used to design a circuit board, can include features such as schematic capture, PCB layout, and simulation.
PCB design: the process of creating a circuit board, can include steps such as schematic capture, PCB layout, and simulation.
PCB drill file: a file used in PCB fabrication, specifying the location and size of the holes to be drilled on the circuit board.
PCB fabrication: the process of creating a circuit board, can include steps such as etching, drilling, lamination, and soldering.
PCB footprint: the layout of pads and through-holes on a circuit board, used to match the physical dimensions of a component.
PCB gerber file: a file used in PCB fabrication, specifying the layout of the circuit board including the copper traces, pads, and other features.
PCB layout: the arrangement of components and traces on a circuit board, can be used to optimize performance, minimize interference, or to comply with regulatory standards.
PCB legend: the text or graphics printed on a circuit board, used for labeling, identification, or aesthetics.
PCB library: a collection of components and footprints that can be used in PCB design, including information such as part numbers, pinout, and other relevant information.
PCB mass production: the process of creating multiple copies of a circuit board, can include steps such as PCB fabrication, PCB assembly, and PCB testing.
PCB netlist: a list of the connections between components on a circuit board, including information such as pin numbers, net names, and other relevant information.
PCB pad: a component that can be used to connect a component to a circuit board, can be used for power delivery, data transfer, or other applications.
PCB pad: a small area of metal on a PCB that can be used to connect electronic devices or equipment.
PCB prototyping: the process of creating a circuit board that is used to test a design, can include steps such as PCB fabrication, PCB assembly, and PCB testing.
PCB recycling: the process of recovering materials from a circuit board, can include steps such as dismantling, shredding, or chemical treatment.
PCB repair: the process of fixing a circuit board that is not functioning properly, can include steps such as replacing components, reworking connections, or other types of repairs.
PCB silkscreen: text or graphics printed on a circuit board, used for labeling, identification, or aesthetics.
PCB simulation: a process of simulating the behavior of a circuit board using software, can be used to predict performance, identify errors, or optimize design.
PCB solder mask: a coating applied to a circuit board, used to protect the copper traces and pads from oxidation and shorting.
PCB testing: the process of testing a circuit board to ensure that it functions properly and meets specifications, can include tests such as continuity, power-on, functional, or in-circuit testing.
PCB trace impedance: the electrical resistance of a trace on a circuit board, can be affected by factors such as trace width, thickness, and dielectric constant.
PCB trace length: the length of a trace on a circuit board, can be affected by factors such as signal integrity, electromagnetic compatibility, or thermal management.
PCB trace material: the material used for a trace on a circuit board, can be affected by factors such as cost, availability, or environmental requirements.
PCB trace routing: the process of laying out the traces on a circuit board, can be affected by factors such as signal integrity, electromagnetic compatibility, or thermal management.
PCB trace spacing: the distance between two traces on a circuit board, can be affected by factors such as crosstalk, electromagnetic compatibility, or thermal management.
PCB trace thickness: the thickness of a trace on a circuit board, can be affected by factors such as current carrying capacity, signal integrity, or electromagnetic compatibility.
PCB trace vias: the connections between different layers of a circuit board, can be affected by factors such as signal integrity, electromagnetic compatibility, or thermal management.
PCB trace width: the width of a trace on a circuit board, can be affected by factors such as current carrying capacity, signal integrity, or electromagnetic compatibility.
PCB trace: a component that can be used to create a conductive path on a circuit board, can be used for power delivery, data transfer, or other applications.
PCB trace: a thin line of metal on a PCB that conducts electricity, can be used to connect electronic devices or equipment.
PCB via: a component that can be used to connect different layers of a circuit board, can be used for power delivery, data transfer, or other applications.
PCB via: a small hole on a PCB that connects different layers of metal, can be used to connect electronic devices or equipment.
Photodiode: a component that can be used to detect light, can be used for light sensing, or for optoelectronic applications.
Photoresistor: a component that changes resistance based on the amount of light it receives, can be used in light sensing applications
Phototransistor: a component that can be used to detect light, can be used for light sensing, or for optoelectronic applications.
Piezoelectric sensor: a component that can be used to detect pressure, acceleration, or vibration, can be used for sensing physical phenomena or for measuring mechanical properties.
Piezoelectric sensor: a component that generates an electrical charge when mechanical stress is applied, and can be used for pressure, force, or acceleration sensing.
PIR sensor (Passive Infrared Sensor): a component that can be used to detect motion, can be used for security systems, occupancy sensing, or energy management.
PLC (Programmable Logic Controller): a specialized computer-based controller that uses a programmable memory to store instructions, and can be used for industrial automation and control systems.
PLC (Programmable Logic Controller): a type of controller that can be programmed to perform a wide range of automation tasks, can be used for industrial control, process control, or other specialized tasks.
Position sensor: a component that can be used to measure the position of a mechanical device, can be used for robotics, automation, or other specialized tasks.
Potentiometer: a component that can be used to adjust the resistance in a circuit and control the voltage or current level.
Potentiometer: a component that can be used to adjust the resistance in a circuit, can be used for volume control, position sensing, or as a variable resistor.
Potentiometer: a component that can be used to adjust the resistance in a circuit, can be used to adjust the voltage or current level, or to provide a variable reference voltage.
Power analyzer: a component that can be used to measure and analyze the power consumption of electronic devices or equipment, can be used for energy management or performance optimization.
Power bank: a portable device that can be used to store and supply electrical energy, can be used to charge mobile devices or other portable electronic devices when a power outlet is not available.
Power cable: a cable that connects a power supply unit to a device or equipment, can be used to provide power or charging capabilities.
Power controller: a component that can control the power delivered to a circuit, can be used for power management, energy saving, or other applications.
Power converter: a component that can be used to convert power from one form to another, can be used to adapt power sources or interface with different devices.
Power cord: a cable that connects electronic devices or equipment to a power source, can be used to provide power or charging capabilities.
Power diode: a type of diode that can handle high current and high voltage, can be used for rectification or to protect a circuit from voltage transients.
Power distribution unit (PDU): a component that can be used to distribute power to multiple devices or equipment, can be used to manage power distribution or power metering.
Power factor controller: a component that can be used to optimize the power factor in a circuit, can be used to improve power efficiency or reduce power loss.
Power inverter: a component that converts DC voltage to AC voltage, can be used to power AC devices from a DC source.
Power meter: a component that measures the power consumption of electronic devices or equipment, can be used for energy monitoring or billing.
Power MOSFET: a type of MOSFET that can handle high current and high voltage, can be used as a switch or an amplifier in power electronic circuits.
Power strip: a component that allows multiple electronic devices or equipment to be connected to a single power outlet, can be used to increase the number of available power outlets or to organize power cords.
Power supply filter: a component that can be used to filter out unwanted signals or noise from a power supply, can be used to improve power quality or protect against interference.
Power supply unit (PSU): a component that converts AC power to DC power, can be used to provide power to electronic devices or equipment.
Power supply: a component that can be used to convert electrical energy from one form to another, can be used to provide a stable voltage or current to a circuit, or to convert AC power to DC power.
Power supply: a component that can convert and regulate power from an AC or DC source, can be used to provide a stable power source for electronic devices or other applications.
Power supply: a component that provides power to a circuit by converting AC or DC to the appropriate voltage and current level.
Power transistor: a type of transistor that can handle high current and high voltage, can be used as a switch or an amplifier in power electronic circuits.
Pressure sensor: a component that can be used to measure the pressure of a fluid or gas, can be used for monitoring, control, or safety applications.
Proximity sensor: a component that can be used to detect the presence of an object, can be used for sensing the distance between two objects or for detecting the presence of an object within a certain range.
Proximity sensor: a component that can be used to detect the presence of an object, can be used for sensing, control, or safety applications.
Proximity sensor: a component that detects the presence of an object or material without physical contact, can be used for sensing position or proximity of an object.
PWM (Pulse Width Modulation) controller: a component that can be used to control the power delivered to a circuit by modulating the width of pulses, can be used for power control or for motor control.
RAM (Random Access Memory): a type of volatile memory that can be used to store data and programs, the data stored in it is lost when the power is turned off.
Reed switch: a component that can be used to detect the presence of a magnetic field, can be used for sensing the position of a device or for triggering an event based on the presence of a magnet.
Relay: a component that can be used to switch a circuit on or off, can be used for remote control, safety interlocks, or to switch high voltage or high current circuits.
Relay: a component that can be used to switch an electrical circuit by using an electromagnet, can be used to control high voltage or high current circuits or to provide isolation between circuits.
Relay: an electrically operated switch that uses an electromagnet to open or close a circuit.
Resistor: a component that can be used to control the flow of current in a circuit, can be used to divide voltage, create a voltage drop, or to limit current.
Resistor: a component that can be used to limit the flow of current in a circuit, can be used to adjust the voltage or current level, or to provide a reference voltage.
Resistor: a component that resists the flow of electrical current and is used to control the amount of current in a circuit
RFI (Radio Frequency Interference) filter: a component that can be used to reduce radio frequency interference in a circuit, can be used to improve signal integrity or to comply with regulatory standards.
RFID (Radio-Frequency Identification) module: a component that can be used to send and receive data using radio frequency, can be used for identification, tracking, or data transfer between devices.
RFID (Radio-Frequency Identification) reader: a component that can be used to read information stored in RFID tags or cards, can be used for identification, tracking, or other applications.
RFID reader: a component that uses radio frequency signals to communicate with a RFID tag and can be used for identification or tracking purposes.
Ring counter: a type of counter that is implemented using a shift register that is always shifting the same pattern.
ROM (Read-Only Memory): a type of non-volatile memory that can be used to store data and programs, it is permanent and cannot be reprogrammed.
RTC (Real-time clock): a component that keeps track of the current date and time, can be used to synchronize events or schedule tasks.
RTOS (Real-Time Operating System): a type of operating system that can be used to control real-time systems, can be used for embedded systems, robotics, or other specialized tasks.
SCADA (Supervisory Control and Data Acquisition): a system that uses software and hardware to remotely monitor and control industrial processes.
Schottky diode: a type of diode that has a lower forward voltage drop than a regular diode, can be used in high frequency circuits or to reduce power loss in a circuit.
SCR (Silicon-Controlled Rectifier): a type of thyristor that can be used to control high voltage or high current, can be used as a switch or a controller in power electronic circuits.
Servo motor: a type of electric motor that is controlled by a servomechanism to achieve precise control of position, speed, or acceleration
Servo motor: a type of motor that can be controlled to a specific position, can be used for precise motion control in robotics, automation, or other applications.
Shift register: a type of circuit that can be used to shift a binary value from one bit to another, can be used as a memory element or a building block for more complex circuits.
Signal conditioner: a component that can be used to amplify, filter, or convert signals in a circuit, can be used to improve signal quality or adapt signals for specific applications.
Smart grid: a modernized electrical grid that uses advanced technology to improve the efficiency, reliability, and flexibility of the power system.
SMD (Surface Mount Device) components: a type of electronic component that is designed to be soldered onto the surface of a circuit board, can be used to save space and reduce assembly time.
Solar cell: a component that can be used to convert solar energy into electrical energy, can be used to power electronic devices or charge batteries.
Solar cell: a component that can convert sunlight into electrical energy, can be used as a power source for solar panels, calculators, or other applications.
Solar panel: a component that converts sunlight into electrical energy, can be used for powering electronic devices or charging batteries.
Solenoid: a component that can be used to convert electrical energy into linear or rotary motion, can be used as an actuator or to control valves or other mechanical devices.
Sound sensor: a component that can be used to detect sound, can be used for sound sensing or for measuring sound levels.
Speech recognition: a component that can be used to convert speech to text, can be used for voice control, transcription, or other applications.
Speed sensor: a component that can be used to measure the speed of a mechanical device, can be used for robotics, automation, or other specialized tasks.
SRAM (Static Random Access Memory): a type of memory that retains data as long as power is supplied and can be used for temporary storage.
SRAM (Static Random Access Memory): a type of volatile memory that can be used to store data and programs, it does not require refreshing and the data stored in it is lost when the power is turned off.
Stepper motor: a type of electric motor that can move in precise increments, can be used for precise control of position or speed
Stepper motor: a type of motor that can be controlled to take precise steps, can be used for precise motion control in robotics, automation, or other applications.
Strain gauge: a component that changes resistance based on mechanical stress, used in sensing force, pressure, or deformation.
Supercapacitor: a type of capacitor that can store a large amount of electrical energy, can be used for energy storage or for providing power during an interruption of the input voltage.
Surge protector: a component that can be used to protect a circuit from voltage spikes, can be used for safety and protection of electrical systems.
Surge protector: a component that helps protect a circuit from voltage spikes or surges that can damage electronic devices.
Surge suppressor: a component that can be used to protect electronic devices or equipment from voltage surges, can be used to improve power quality or protect against power disturbances.
Switch: a component that can be used to manually or automatically open or close a circuit, allowing or interrupting the flow of current.
Switching regulator: a component that can be used to regulate the voltage or current of a circuit, can be used to provide a stable voltage or current to a circuit or to protect a circuit from overvoltage or overcurrent.
Temperature sensor: a component that can be used to measure the temperature of a device or environment, can be used for monitoring, control, or safety applications.
Temperature sensor: a component that can be used to measure the temperature of a device or environment, can be used for temperature control or for monitoring temperature-dependent processes.
Terminal block: a component that can be used to join multiple wires together, can be used for power distribution, control, or other applications.
Terminal block: a component that connects multiple wires together, can be used for power distribution or signal connections.
Text-to-Speech: a component that can be used to convert text to speech, can be used for speech synthesis, assistive technology, or other applications.
TFT (Thin-Film Transistor) display: a type of display that uses TFTs to control the passage of light, can display text, images or other information.
Thermistor: a component that can be used to measure temperature, can be used to monitor the temperature of a device or to control temperature-dependent processes.
Thermistor: a component that changes resistance with temperature change, used to measure or detect temperature change.
Through-hole components: a type of electronic component that is designed to be inserted into holes drilled in a circuit board, can be used for components that need to withstand mechanical stress or for ease of replacement.
Tilt switch: a component that can be used to detect the tilt or orientation of a device, can be used for sensing the position of a device or for triggering an event based on the orientation of the device.
Timer: a component that can be used to delay or time events in a circuit, for scheduling tasks, or to control time-dependent processes.
Timer: a component that can be used to generate timed events or delays in a circuit, can be used for timing, sequencing, or as a clock source.
Timer: a type of circuit that can be used to generate timed events or delays.
Transformer: a component that can be used to transfer electrical energy from one circuit to another, can be used to change the voltage level, to isolate circuits, or to match impedance.
Transformer: a component that can be used to transfer electrical energy from one circuit to another, can be used to step up or step down voltage levels or to isolate two circuits from each other.
transformer: a component that transfers electrical energy from one circuit to another through electromagnetic induction.
Transistor: a component that can be used to amplify electrical signals or switch electrical current on and off
Transistor: a component that can be used to control the flow of current in a circuit, can be used as a switch, amplifier, or to control the speed of a motor.
Transistor: a component that can be used to control the flow of current or voltage in a circuit, can be used as a switch or an amplifier.
TRIAC (Triode for Alternating Current): a type of thyristor that can be used to control high voltage or high current in AC circuits, can be used as a switch or a controller in power electronic circuits.
Ultrasonic sensor: a component that can be used to detect and measure distance, can be used for obstacle detection or for measuring liquid level.
Ultrasonic sensor: a component that uses sound waves to detect the distance or presence of an object, can be used for measuring distance, speed or level.
UPS (Uninterruptible Power Supply): a component that can provide temporary power during a power outage, can be used to protect sensitive equipment, or to ensure continuity of operations.
UPS (Uninterruptible Power Supply): a component that provides backup power to electronic devices or equipment in the event of a power outage, can be used to protect against data loss or equipment damage.
UV sensor: a component that can be used to detect ultraviolet radiation, can be used for measuring UV exposure or for controlling UV-dependent processes.
UV sensor: a component that detects ultraviolet radiation and can be used for sensing UV exposure or for UV-based applications.
Varistor: a component that can be used to protect against voltage transients, can be used to suppress voltage spikes or to protect electronic devices from damage.
Varistor: a component that helps protect a circuit from voltage spikes by diverting the excess voltage to ground.
Video camera: a component that can be used to capture and record video, can be used for surveillance, recording, or other applications.
Voltage regulator: a component that maintains a constant voltage level in a circuit.
Voltage sensor: a component that measures the voltage level in a circuit.
Wires: a component that conducts electrical current, can be used to connect electronic devices or components.
Wiring: component that can be used to connect electrical devices and components together, can be used for power delivery, data transfer, or other applications.
Zener diode: a component that can be used to regulate voltage, can be used to provide a stable reference voltage or to protect against overvoltage.
Zener diode: a type of diode that can be used to provide a stable reference voltage or to protect against overvoltage, can be used in voltage regulation or overvoltage protection circuits.
Zigbee module: a component that can be used to send and receive data over a low power wireless communication, can be used for wireless communication between devices in a personal area network.