Between a source and a load that do not match, a quarter-wave section transforms impedance; a cascade of them, weighted by the binomial coefficients, transforms it with a maximally flat response. This calculator works that design as Book Two states it: from the section count, the source impedance, the load, and the design frequency, it returns the distribution coefficient A = 2^(−n) · ln(R_B/Z₀), the reflection coefficients Γ_k = C(n,k) · A distributed symmetrically over the junctions, the section impedances by both of the book’s own paths — the log-distribution formula and the symmetry identities — and the fractional bandwidth at the reflection tolerance you state. Every figure comes back with the design state it was computed in; the design-frequency state travels with every result.
The design stands on one worked example, complete in its stated state: Book Two, Document A, Example 9.2 — three sections matching Z₀ = 50 Ω to R_B = 10 Ω at f₀ = 5.8 GHz. Its coefficient and Γ set are exact (A = −0.20118; Γ = (−0.20118, −0.60354, −0.60354, −0.20118)), its final synthesis is exact by both paths (Z₁ = 40.88 Ω, Z₂ = 22.36 Ω, Z₃ = 12.23 Ω, closing on the 10 Ω load exactly), and its stated bandwidth is 29.81% (Δf = 1.729 GHz; band 4.9355–6.6645 GHz). The example as printed also retains two superseded, incorrect passes and an architecture diagram printing their set (43.1 / 22.4 / 11.6 Ω) beside the final synthesis; those figures stand in the tool’s documentation as the passage’s recorded state, and they are never its outputs — the tool computes the set that closes on the load. One element of the example the registry’s documentation does not state is the reflection tolerance Γ_m at which its printed band edges stand; the tool takes Γ_m as your stated input and defaults it to 0.0201, the measured state at which it reproduces the example’s printed bandwidth figures — recorded as a measurement state in the tool, not filled in as the book’s.
The book’s own placement of this design is a communications one: the design frequency, 5.8 GHz, is a communications band, the example stands in Document A’s signals span, and impedance matching is the RF front-end operation it performs — the junction between a source and the line it drives. For SolveForce’s collective work the entry records the pillar Connectivity (RF matching in provisioned links); no finder service is served directly, and that state is recorded rather than a mapping forced. The figures here are computed from the values you enter, at the design state you enter; a matching network for a specific installation — its line technology, its power handling, its measured response — is confirmed with a specialist for the site.
Ready when you are — run the numbers, or talk it through with a specialist.
Key terms in plain language
Open a term for a concise explanation of language used on this page.
Bandwidth
The amount of data a connection can carry in a given time, usually measured in Mbps or Gbps. More bandwidth supports more users, devices, and simultaneous applications.
VoIP
Voice over Internet Protocol carries phone calls over an IP network instead of a traditional analog phone line. Call quality depends on network stability, latency, and traffic management.
Unified Communications (UCaaS)
A cloud-based combination of business calling, messaging, meetings, presence, and collaboration tools managed as one communications service.
SIP Trunking
A service that connects a business phone system to the public telephone network using Internet Protocol, replacing or supplementing traditional phone lines.
Latency
The time it takes data to travel between two points. Lower latency improves voice, video meetings, cloud applications, gaming, and other real-time services.
Service-Level Agreement (SLA)
A provider’s written commitment covering service targets such as availability, response time, repair time, and sometimes financial credits when commitments are missed.