Electrical Engineering — Book 1B: Principles, Quantities, Laws, DC/AC Networks, and Circuit Analysis — Volume 3 of 3

$20.00

Volume 3 of 3 covers chapters 23–33 of Book 1B, with linked contents, its own bibliography and A–Z terminology. PDF ebook.

SKU: SF-BK-01B-V03-EBOOK Categories: , , , , Brand:

Purchase options for this book

Available editions and individual volumes from this book. Each option is sold separately.

Description

Electrical Engineering

Book 1B: Principles, Quantities, Laws, DC/AC Networks, and Circuit Analysis — Volume 3 of 3

Ronald Legarski
SOLVEFORCE®

Individual 8.5 × 11-inch PDF ebook covering chapters 23–33. Includes its matching volume cover, navigable contents, bibliography and terminology directory. This is one of three volumes composing Book 1B.

Complete volume chapter guide

Chapter 23: Nonlinear DC Circuits

Chapter introduction

Linear circuit theory relies entirely on the principle of superposition, which demands that the relation between cause (excitation) and effect (response) satisfies homogeneity and additivity. A circuit element is defined as linear if its constitutive relation between current i(t)i(t) and voltage v(t)v(t) can be represented by a linear differential or algebraic operator. For direct-current (DC) networks operating in a steady state, time derivatives vanish, reducing constitutive equations to pure algebraic functions f(v,i)=0f(v,i) = 0.

When an element’s volt-ampere (vv–ii) characteristic violates linearity, the entire network containing that element becomes nonlinear. Formally, an element is nonlinear if its governing mapping T:V→IT:V \rightarrow I satisfies:

T(αv1+βv2)≠αT(v1)+βT(v2)for standard real scalars α,β∈ℝT(\alpha v_{1} + \beta v_{2}) \neq \alpha T(v_{1}) + \beta T(v_{2})\quad\text{for standard real scalars }\alpha,\beta\mathbb{\in R}

Subsections and subchapters

23.1 Fundamental Concepts of Nonlinearity in DC Networks

Breakdown of Superposition, Reciprocity, and Matrix Formulations
Classification of Nonlinearities
Continuous vs. Discontinuous Nonlinearities
Monotonic vs. Non-Monotonic Characteristics
Bilateral vs. Unilateral Elements

23.2 Semiconductor Diode Physical Characteristics and Mathematical Models

Physical Origins of Junction Nonlinearity
The Shockley Ideal Diode Equation
Temperature Dependence of Diode Characteristics
Reverse Breakdown Dynamics
Zener Breakdown
Avalanche Breakdown
Other Nonlinear Two-Terminal Devices

23.3 Graphical Analysis and Load-Line Method

Mathematical Foundation of the Load Line
Construction and Extraction of the Operating Point (QQ-Point)
Key Geometry Characteristics of the Load Line
Stability and Multi-Valued Operating Points
Stability Criterion
Worked Example 23.1: Graphical Operating Point Determination
Problem Statement
Solution
Step 1: Formulate the Load Line Equation
Step 2: Tabulate Device Characteristic Curve vs. Load Line
Step 3: Analytical Verification

23.4 Piecewise Linear (PWL) Modeling and Analysis

Standard Diode Models
1. Ideal Diode Model
2. Constant Voltage Drop (CVD) Model
3. CVD Model with Series Resistance (rfr_{f})
The Assumed-State Method for Multi-Diode Networks
State Validity Conditions
Worked Example 23.2: Dual-Diode Network Analysis
Problem Statement
Solution
Trial State 1: Assume D1D_{1} is ON and D2D_{2} is ON
Trial State 2: Assume D1D_{1} is ON and D2D_{2} is OFF

23.5 Small-Signal Analysis and Dynamic Resistance

Taylor Series Linearization
Small-Signal Dynamic Resistance (rdr_{d})
The Small-Signal Superposition Protocol
Worked Example 23.3: Voltage Regulator AC Ripple Attenuation
Problem Statement
Solution
Step 1: DC Bias Analysis
Step 2: Calculate Dynamic Small-Signal Resistance (rdr_{d})
Step 3: AC Small-Signal Response Analysis

23.6 Iterative Numerical Methods for Nonlinear DC Analysis

Mathematical Formulation and Transcendental Equations
Analytical Closed-Form Solution via the Lambert W Function
Fixed-Point Iteration Method
Convergence Condition
Formulation 1: Direct Voltage Mapping (Divergent)
Formulation 2: Logarithmic Inverse Mapping (Convergent)
The Newton-Raphson Method
Derivation of the Update Equation
Application to the Diode Equation
Multi-Variable Newton-Raphson Solver for General Circuit Networks
Stabilization Techniques for Iterative Convergence
Voltage Limiting Algorithms (e.g., SPICE PNJLIM)

23.7 SPICE Implementation and Numerical Solvers

The SPICE Linear Companion Model
Derivation of Companion Elements
SPICE Diode Netlist Model Parameters
Solver Control Options and Convergence Troubleshooting
Advanced Fallback Algorithms
Verification Netlist Example
Diagnostic Simulation Output

Chapter 24: Operational Amplifiers and Ideal Active Circuits

Chapter introduction

The operational amplifier (op-amp) represents the fundamental active building block of modern analog signal processing networks. While passive direct-current networks constructed purely from ideal voltage sources, current sources, and resistors obey linear system equations governed strictly by Kirchhoff’s laws and Conservation of Energy, active circuits introduce power-amplifying capability through internal semiconductor structures. By coupling external DC power rails to a multi-stage differential transistor array, the operational amplifier operates as a high-gain integrated device that transforms microvolt-level differential input voltages into robust, low-impedance output driving signals.

From an axiomatic circuit analysis standpoint, the operational amplifier is fundamentally modeled as a Voltage-Controlled Voltage Source (VCVS). The primary functional interface comprises five primary terminals:

Subsections and subchapters

24.1 Architectural Foundations and Terminal Characteristics of the Operational Amplifier

24.1.1 The Operational Amplifier Abstraction as a Controlled Voltage Source
24.1.2 Internal Architecture Overview
24.1.3 Differential Voltage, Common-Mode Voltage, and Open-Loop Transfer Relationship
24.1.4 Axiomatic Principles of the Ideal Operational Amplifier Model

24.2 Feedback Mechanics and the Virtual Ground Principle

24.2.1 Negative Feedback Dynamics and Loop Gain
24.2.2 Rigorous Derivation of the Virtual Short and Virtual Ground Principles
24.2.3 Conditions for Virtual Ground Validity
24.2.4 Physical Limits: Saturation, Supply Rails, and the Breakdown of Virtual Ground

24.3 Canonical Inverting Topology Architecture and Analysis

24.3.1 Nodal Derivation of Closed-Loop Gain
24.3.2 Input and Output Impedance Calculations
24.3.3 Finite Open-Loop Gain Impact and Systemic Gain Error Derivation
Example Analysis: Finite Gain Error
24.3.4 Current-to-Voltage Converters (Transimpedance Amplifiers)

24.4 Canonical Non-Inverting Topology Architecture and Analysis

24.4.1 Nodal Derivation of Closed-Loop Gain
24.4.2 Input and Output Impedance Characterization
24.4.3 The Voltage Follower (Unity-Gain Buffer)
Analytical Properties of the Voltage Follower
24.4.4 Common-Mode Voltage Exposure and Systemic Impact

24.5 Linear Combination Networks and Signal Processing Synthesizers

24.5.1 Inverting Summing Amplifier Analysis
24.5.2 Non-Inverting Summing Amplifier Analysis
24.5.3 Difference Amplifiers and Differential Subtraction Networks
24.5.4 Resistor Network Matching Requirements and Common-Mode Rejection Ratio (CMRR)
Practical Resistor Mismatch Analysis

24.6 Active DC Network Integration and Practical Measurement Systems

24.6.1 Three-Op-Amp Instrumentation Amplifier Architecture
Quantitative Stage Derivation
Advantages of the 3-Op-Amp Topology
24.6.2 Voltage-Controlled Constant Current Sources: The Howland Current Pump
24.6.3 DC Offset Voltages, Input Bias Currents, and Error Compensation Techniques
Bias Current Compensation Optimization
24.6.4 Dynamic Range, Noise Sensitivity, and Thermal Drift Analysis
Thermal Drift Parameters
Signal-to-Noise Ratio (SNR) and Dynamic Range (DR)

24.7 Mathematical Sensitivity Analysis and SPICE Simulation Validation

24.7.1 Parameter Sensitivity Derivations
1. Sensitivity to Open-Loop Gain A0A_{0}
2. Sensitivity to Feedback Resistor RfR_{f}
24.7.2 Macro-Modeling the Non-Ideal Op-Amp in Circuit Solvers
SPICE Subcircuit Macro-Model Netlist Definition
24.7.3 SPICE Verification Deck and Convergence Analysis
Comprehensive System Diagnostics and Verification Analysis
Mathematical Verification of Ideal and Finite-Gain Results
Quantitative Performance Verification Matrix

Chapter 25: Capacitance and Electric Field Storage

Chapter introduction

Capacitance represents the fundamental property of a physical system to store electrical energy within an electrostatic field through the temporal and spatial separation of electric charge. At the microscopic scale, when a potential difference v(t)v(t) measured in volts is established between two isolated conductive bodies, an electric field 𝑬\mathbf{E} measured in volts per meter is induced in the non-conductive medium (dielectric or vacuum) separating them. This electric field exerts a force on free charge carriers within the conductors, causing negative charge (electrons) to accumulate on the conductor at the lower potential and an equal quantity of positive charge to reside on the conductor at the higher potential.

The fundamental relationship governing this phenomenon is expressed by Gauss’s Law in integral form, which dictates that the net flux of the electric displacement field 𝑫\mathbf{D} through any closed surface ∂Ω\partial\Omega enclosing a volume Ω\Omega is equal to the net free electric charge QenclQ_{encl} contained within that volume:

∮∂Ω𝑫⋅d𝑨=Qencl\oint_{\partial\Omega}^{}\mathbf{D} \cdot d\mathbf{A} = Q_{encl}

Subsections and subchapters

25.1 Electrostatic Foundations and the Physics of Capacitance

25.2 Geometric Topologies and Analytical Field Derivations

Parallel-Plate Geometry
Coaxial Cylindrical Geometry
Concentric Spherical Geometry
Parallel Twin-Wire Geometry

25.3 Dielectric Materials, Polarization Mechanisms, and Non-Idealities

Frequency Dispersion and Dielectric Loss
Dielectric Breakdown and Soakage

25.4 Maxwell’s Displacement Current and the Extension to Electrodynamics

Continuity of Current in a Parallel-Plate Structure
Magnetic Field Generation within the Dielectric Region

25.5 Dynamic Differential V-I Relations and Transient Operations

Fundamental Physical Properties
Energy Flow and Reversibility

25.6 Comprehensive Lumped Equivalent Circuit Models and Parasitics

Parasitic Components
Self-Resonance Frequency (f0f_{0})
Quality Factor (QQ) and Dissipation Factor (DFDF)

25.7 Mathematical Derivations, Systematic Examples, and Engineering Applications

Mathematical Proof 1: Electrostatic Energy Derivation via Field Vectors
Application Case Study 1: Multi-Layer Dielectric Structure Analysis
1. Equivalent Capacitance Derivation
2. Quantitative Capacitance Value Calculation
3. Maximum Safe Operating Voltage Threshold Determination
Application Case Study 2: Dynamic Displacement Field and Transient Response Calculation
1. Total Capacitance Evaluation
2. Charging Conduction and Displacement Current
3. Induced Azimuthal Magnetic Field Calculation
4. Stored Electrostatic Energy at Conclusion of Ramp

25.8 Diagnostic & Quantitative Verification Matrix

Primary Design Parameters
Calculated Values at f=100 MHzf = 100\text{ MHz}
Quantitative Verification Matrix

Chapter 26: Inductance and Magnetic Field Storage

Chapter introduction

Inductance is the electromagnetic property of a circuit element or physical geometry that quantifies its ability to store energy in a surrounding magnetic field when traversed by an electric current. At its fundamental physical root, inductance describes the macroscopic coupling between moving electric charges (current) and the magnetic flux those moving charges generate.

When an electric current i(t)i(t) flows through a conducting path, it acts as a magnetomotive source, generating a magnetic field intensity 𝑯(𝒓,t)\mathbf{H}(\mathbf{r},t) in the surrounding three-dimensional space according to Ampère’s circuital law (and more generally, the Biot-Savart law for differential current elements):

∮𝒞𝑯⋅d𝒍=Ienclosed=∬𝒮𝑱⋅d𝑨\oint_{\mathcal{C}}^{}\mathbf{H} \cdot d\mathbf{l} = I_{\text{enclosed}} = \iint_{\mathcal{S}}^{}\mathbf{J} \cdot d\mathbf{A}
𝑩(𝒓)=μ4π∭𝒱𝑱(𝒓′)×(𝒓−𝒓′)∥𝒓−𝒓′∥3d𝒱′\mathbf{B}(\mathbf{r}) = \frac{\mu}{4\pi}\iiint_{\mathcal{V}}^{}\frac{\mathbf{J}(\mathbf{r}') \times (\mathbf{r} - \mathbf{r}')}{\parallel \mathbf{r} - \mathbf{r}' \parallel^{3}}\, d\mathcal{V}'

Subsections and subchapters

26.1 Magnetic Flux Linkage and the Physical Foundations of Inductance

26.1.1 Amperian Field Generation and Magnetic Flux Density
26.1.2 The Concept of Flux Linkage
26.1.3 Mathematical Definition of Self-Inductance
26.1.4 Dimensional Derivation and SI Unit Specifications

26.2 Electromagnetic Induction and Faraday-Lenz Law Dynamics

26.2.1 Faraday’s Law and Lenz’s Law
26.2.2 Terminal Voltage Convention and time-varying Inductance
26.2.3 Integral Constitutive V-I Relationship
26.2.4 The Principle of Current Continuity
26.2.5 Limits of Lumped Circuit Theory

26.3 Magnetic Field Energy Storage and Co-Energy Principles

26.3.1 Mathematical Derivation of Stored Energy
26.3.2 Field-Theoretic Derivation of Energy Density
26.3.3 Magnetic Co-Energy and Electromechanical Force Calculation
26.3.4 Energy Distribution in Air-Gapped Magnetic Circuits

26.4 Geometric Derivation of Inductance for Canonical Geometries

26.4.1 Toroidal Inductor
26.4.2 Ideal Finite Solenoid and the Nagaoka Factor
26.4.3 Coaxial Cable Internal and External Inductance
External Inductance Derivation:
Internal Inductance Derivation (Low Frequency / DC):
26.4.4 Two-Wire Parallel Transmission Line
26.4.5 Microstrip PCB Trace Inductance

26.5 Non-Idealities, Parasitics, and Real-World Inductor Engineering

26.5.1 Lumped Equivalent Circuit Model
26.5.2 Skin Effect and Proximity Effect in Conductors
26.5.3 Magnetic Core Materials, Saturation, and Hysteresis
26.5.4 Core Loss Mechanisms and Steinmetz Modeling
1. Hysteresis Loss (PhP_{h}):
2. Eddy Current Loss (PeP_{e}):
26.5.5 Complex Permeability Representation
26.5.6 Self-Resonant Frequency (fSRFf_{SRF}) and Quality Factor (QQ)

26.6 Transient Analysis of Inductive Circuits

26.6.1 First-Order Series RL Circuit Transient Response
Step Response (Charging Dynamic):
Natural Decay Response (Discharging Dynamic):
26.6.2 Transient Switching Phenomena and Inductive Kickback
26.6.3 Overvoltage Suppression and Snubber Network Design
1. Flyback Diode Protection (DC Networks):
2. RC Snubber Network Protection (AC/DC Switching):

26.7 Numerical Simulation, Verification Matrix, and Worked Examples

26.7.1 Detailed Analytical Benchmark Problem Specification
26.7.2 Step-by-Step Analytical Derivations
1. Calculation of Nominal Self-Inductance (L0L_{0}):
2. Calculation of Circuit Time Constant (τ\tau) and Steady-State Current (IssI_{ss}):
3. Calculation of Stored Magnetic Field Energy (WmW_{m}) at Steady State:
4. Calculation of Peak Flux Linkage (λmax\lambda_{\max}):
5. Calculation of Component Self-Resonant Frequency (fSRFf_{SRF}):
6. Transient Evaluation at t=τ=36.968μst = \tau = 36.968\ \mu\text{s}:
26.7.3 Complete SPICE Netlist Model Construction
26.7.4 Quantitative Verification Matrix

Chapter 27: First-Order RC and RL Transients

Chapter introduction

A first-order electrical system is defined mathematically as any dynamic network whose state transition behavior is governed by a first-order linear ordinary differential equation (ODE). Physically, such networks contain exactly one independent energy storage element—either a single capacitor storing energy in an electric field, or a single inductor storing energy in a magnetic field—or a network of like elements that can be reduced to an equivalent single storage element through series-parallel or network transformation rules.

The fundamental state variable for a capacitive network is the node voltage vC(t)v_{C}(t) across the capacitor, while the fundamental state variable for an inductive network is the branch current iL(t)i_{L}(t) through the inductor. These variables directly dictate the energy stored within the electromagnetic fields of the respective components:

We(t)=12CvC2(t)W_{e}(t) = \frac{1}{2}Cv_{C}^{2}(t)
Wm(t)=12LiL2(t)W_{m}(t) = \frac{1}{2}Li_{L}^{2}(t)

Subsections and subchapters

27.1 Fundamental Physics and Ordinary Differential Equations of First-Order Systems

27.1.1 Energy Storage Elements and Continuity Conditions
27.1.2 Mathematical Foundations: Linear First-Order Ordinary Differential Equations
27.1.3 The Lumped-Element Validity Boundary in Transient Analysis

27.2 Source-Free (Zero-Input) Response of RC Networks

27.2.1 Derivation of Source-Free RC Differential Equation
27.2.2 Exact Solution and Natural Frequency
27.2.3 Physical Energy Dissipation and Entropy Dynamics in Resistors
27.2.4 Time Constant τRC=ReqC\tau_{RC} = R_{eq}C and Thévenin Decomposition

27.3 Source-Free (Zero-Input) Response of RL Networks

27.3.1 Derivation of Source-Free RL Differential Equation
27.3.2 Exact Solution and Decaying Current Dynamics
27.3.3 Magnetic Energy Dissipation Mechanics
27.3.4 Time Constant τRL=L/Req\tau_{RL} = L/R_{eq} and Dual Relations

27.4 Step (Zero-State and Complete) Response of First-Order Networks

27.4.1 Singular Functions: Unit Step u(t)u(t) and Unit Impulse δ(t)\delta(t)
27.4.2 Zero-State Response (ZSR) to a Step Excitation
27.4.3 Decomposition into Natural Response and Forced Response
27.4.4 The Universal First-Order Response Equation
27.4.5 Physical Meaning of Steady-State in DC Transients

27.5 Pulse, Ramp, and Arbitrary Excitation Response

27.5.1 Finite-Duration Pulse Response and Superposition
27.5.2 Impulse Response h(t)h(t) as Derivative of Step Response s(t)s(t)
27.5.3 Convolution Integral for Arbitrary Continuous Inputs

27.6 Geometric, Energy, and Phase-Space Interpretations of Time Constants

27.6.1 Geometrical Analysis: Initial Derivative and Tangent Intercepts
27.6.2 Energy Transfer Profiles and 50% Efficiency Bound in Capacitive Charging
27.6.3 Phase-Space Trajectories and State-Plane Representation of RC and RL Transients

27.7 Practical Engineering Applications, Circuit Topologies, and Non-Idealities

27.7.1 Switch Bounce, Parasitically Loaded Transients, and Snubber Networks
27.7.2 Digital Gate Propagation Delay and Interconnect Modeling
27.7.3 Inductive Kickback, Flyback Diode Suppression, and Voltage Spikes

27.8 High-Precision Step-by-Step Computational Worked Examples

27.8.1 Example 1: Multi-Loop RC Network with Sequential Switch Operations
Analytical Derivation and Mathematical Execution:
27.8.2 Example 2: Inductive Energy Recovery and Flyback Dynamics in RL Circuit
Analytical Derivation and Mathematical Execution:

27.9 Verification via SPICE Modeling and Quantitative Benchmark Matrix

27.9.1 SPICE Netlist Construction for First-Order Transient Networks
27.9.2 Quantitative Verification Matrix

Chapter 28: Second-Order RLC Circuit Transients

Chapter introduction

In single-energy storage networks (first-order RCRC and RLRL circuits), the system response is dictated by a single scalar differential equation whose solution is characterized by a monotonic exponential decay or accumulation governed by a single time constant τ\tau. However, when a network contains two independent, non-combinable energy storage elements—such as an inductor storing energy in its magnetic field (Wm=12LiL2W_{m} = \frac{1}{2}Li_{L}^{2}) and a capacitor storing energy in its electric field (We=12CvC2W_{e} = \frac{1}{2}Cv_{C}^{2})—the physical system acquires a second degree of dynamic freedom. The exchange of energy between these two vector fields gives rise to second-order ordinary differential equations (ODEs). These systems exhibit transient phenomena that are not merely monotonic, but can oscillate, ring, or return to equilibrium along multi-exponential trajectories depending on the rate of energy dissipation within the resistive elements.

To formalize the network equations, consider a system where energy continuity across the reactive boundary conditions requires selecting state variables that cannot change instantaneously in the absence of infinite impulse forcing functions. The canonical state variables for any lumped parameter second-order network are the inductor current iL(t)i_{L}(t) and the capacitor voltage vC(t)v_{C}(t).

Subsections and subchapters

28.1 Governing Differential Equations for Second-Order RLC Networks

28.1.1 Derivation of Series RLC Network State Equations
28.1.2 Derivation of Parallel RLC Network State Equations
28.1.3 Canonical Parameterization: Neper Frequency and Undamped Natural Frequency
28.1.4 Dimensionless Damping Parameters and Characteristic Equation

28.2 Classification of Transient Response Damping Regimes

28.2.1 The Overdamped Regime (α>ω0\alpha > \omega_{0}, ζ>1\zeta > 1)
28.2.2 The Critically Damped Regime (α=ω0\alpha = \omega_{0}, ζ=1\zeta = 1)
28.2.3 The Underdamped Regime (α<ω0\alpha < \omega_{0}, ζ<1\zeta < 1)

28.3 Series RLC Circuit Transient Analysis

28.3.1 Mathematical Statement and Initial Conditions
28.3.2 Step Response Derivation: Overdamped Case (α>ω0\alpha > \omega_{0})
28.3.3 Step Response Derivation: Critically Damped Case (α=ω0\alpha = \omega_{0})
28.3.4 Step Response Derivation: Underdamped Case (α<ω0\alpha < \omega_{0})

28.4 Parallel RLC Circuit Transient Analysis

28.4.1 Nodal State Dynamics and Standard Damped Form
28.4.2 Initial Conditions for Parallel Networks
28.4.3 Unified Mathematical Duality Framework

28.5 Energy Dynamics and Inter-Element Energy Exchange

28.5.1 Instantaneous Power Dissipation Rate and Field Conservation
28.5.2 Phase-Space Trajectories and State-Plane Analysis

28.6 Advanced Transient Metrics and Time-Domain Specifications

28.6.1 Peak Time (tpt_{p})
28.6.2 Percentage Overshoot (%OS\% OS)
28.6.3 Settling Time (tst_{s})
28.6.4 Logarithmic Decrement (δ\delta)

28.7 General Second-Order Circuit Configurations with Dependent Sources and Operational Amplifiers

28.7.1 Active Second-Order State Derivation
28.7.2 Stability Boundaries and Right-Half-Plane (RHP) Pole Migration

28.8 Comprehensive Worked Examples

Example 28.1: Overdamped High-Voltage Impulse Generator Circuit Analysis
Example 28.2: Optimization of an RLC Snubber Circuit for Inductive Switching Transients

28.9 SPICE Numerical Verification Deck and Benchmark Matrix

28.9.1 SPICE Simulation Input Deck
28.9.2 Quantitative Verification Matrix

Chapter 29: Sinusoidal Steady-State Response in Time Domain

Chapter introduction

In linear time-invariant (LTI) circuit analysis, continuous-time sinusoidal excitation represents one of the most fundamental signal classes. Sinusoidal forcing functions naturally arise in power generation, transmission systems, signal processing, and communication architectures. Before applying transform techniques or frequency-domain methods, establishing a baseline analysis directly within the real continuous-time domain t∈(−∞,∞)t \in ( - \infty,\infty) provides physical insight into energy exchange, initial condition settling, and differential boundary enforcement.

A general time-domain sinusoidal forcing function f(t)f(t)—representing either an independent voltage source v(t)v(t) or an independent current source i(t)i(t)—is mathematically defined by:

f(t)=Fmcos(ωt+ϕ)f(t) = F_{m}cos(\omega t + \phi)

Subsections and subchapters

29.1 Mathematical Formulation of Sinusoidal Forcing Functions

29.2 First-Order LTI Networks Under Sinusoidal Excitation

29.2.1 Governing Differential Equations for First-Order Networks
29.2.2 Derivation of the Homogeneous Solution xh(t)x_{h}(t)
29.2.3 Derivation of the Particular Solution xp(t)x_{p}(t) via Undetermined Coefficients
29.2.4 Complete Time-Domain Solution and Boundary Enforcement

29.3 Transition from Transient to Sinusoidal Steady State

29.3.1 Definition of the Steady-State Regime
29.3.2 Physical Phase Relationships and Impedance Characterization in Time Domain

29.4 Second-Order LTI Networks Under Sinusoidal Excitation

29.4.1 Canonical Differential Formulations
29.4.2 Homogeneous Solutions for Second-Order Systems
29.4.3 Derivation of Particular Solution ip(t)i_{p}(t) for Second-Order Systems

29.5 Resonance and Frequency Response in the Time Domain

29.5.1 Series Resonant Envelope and Phase Shift Dynamics
29.5.2 Internal Reactive Voltage Magnification and Quality Factor QQ
29.5.3 Time-Domain Energy Dynamics at Resonance

29.6 Non-Sinusoidal Periodic Driving Functions & Fourier Series Coupling

29.6.1 Superposition of Harmonic Responses
29.6.2 Mathematical Formulation for First-Order Networks Driven by Periodic Waves

29.7 Worked Examples and Analytical Verification

29.7.1 Example 29.1: First-Order Series RLRL Transient and Sinusoidal Steady State
29.7.2 Example 29.2: Second-Order Underdamped Series RLCRLC Circuit Driven by Sinusoidal Source

29.8 Numerical Verification and SPICE Simulation

29.8.1 SPICE Simulation Netlist File: chapter29_rlc_sinusoidal.cir
29.8.2 Quantitative Verification Matrix

Chapter 30: Sinusoidal Sources and Phasor Representation

Chapter introduction

In the analysis of continuous-time physical systems, sinusoidal signals—often termed time-harmonic signals—occupy a fundamental position. While early electrical power distribution systems experimented with direct-current (DC) architectures, alternating-current (AC) networks operating under steady-state sinusoidal excitation quickly emerged as the global standard for energy generation, transmission, and distribution. Beyond energy applications, sinusoids constitute the foundational building blocks of signal processing, telecommunications, acoustics, and electromagnetic wave propagation.

Complex exponentials are eigenfunctions of an LTI system wherever its frequency response is defined. A real sinusoid is the real part of a complex exponential; its steady-state response can therefore change amplitude and phase. A phase-shifted real sinusoid is generally not a scalar multiple of the original real sinusoid, so the eigenfunction statement applies directly to the complex exponential.

Subsections and subchapters

30.1 The Physics and Mathematics of Time-Harmonic Signals

30.1.1 Mathematical Properties and Eigenfunction Identity
30.1.2 Functional Parameters of Sinusoidal Signal Waveforms

30.2 Time-Average Quantities and Root-Mean-Square (RMS) Metric

30.2.1 Average Value of Periodic Signals
30.2.2 The Root-Mean-Square (RMS) / Effective Value Derivation
30.2.3 Evaluation of RMS Value for a Pure Sinusoid
30.2.4 Generalized Waveform RMS and Shape Characterization Factors
RMS Analysis of a Sinusoid with DC Offset
Quantitative Summary Table for Common Canonical Waveforms

30.3 Phase Relationships, Lead/Lag Dynamics, and Phase Angles

30.3.1 Mathematical Definition of Phase Difference and Angle Alignment
Standard Conversion Identities
30.3.2 Strict Physical Definitions of Lead, Lag, and In-Phase
30.3.3 Time Delay Translation to Phase Displacement
Step-by-Step Numerical Transformation Example

30.4 Complex Numbers and Vector Foundations for Phasor Analysis

30.4.1 Euler’s Identity and Geometric Representation
30.4.2 Algebraic Forms of Complex Numbers
Domain Transformations and Coordinate Conversions
30.4.3 Arithmetic Operations in the Complex Domain

30.5 The Complex Domain Mapping: Transformation to Phasor Representation

30.5.1 Derivation of the Phasor Transform
30.5.2 Peak Phasor vs. RMS Phasor Conventions
30.5.3 Linear Properties and Operational Rules of the Phasor Transform
Summary Mapping Table: Time Domain vs. Phasor Domain

30.6 Phasor Diagrams and Complex Geometry of AC Signals

30.6.1 Rotating Vectors and Static Snapshots
30.6.2 Geometric Vector Addition and KVL/KCL Verification

30.7 Impedance and Admittance in the Phasor Domain

30.7.1 Terminal Relations of Passive Elements
1. The Ideal Resistor
2. The Ideal Inductor
3. The Ideal Capacitor
30.7.2 General Complex Impedance (𝒁\mathbf{Z})
Reactance Definitions
30.7.3 Complex Admittance (𝒀\mathbf{Y})
Relationship Between Impedance and Admittance Components
Operational Summary Table for Passive Elements

30.8 Kirchhoff’s Laws and Network Theorems in the Phasor Domain

30.8.1 Kirchhoff’s Laws in Phasor Form
30.8.2 Impedance Combination Rules
30.8.3 Nodal Analysis Formulation in the Complex Domain
30.8.4 Thévenin and Norton Network Equivalence
30.8.5 AC Superposition Theorem
Multi-Frequency AC Networks

30.9 Comprehensive Worked Numerical Examples

30.9.1 Example 30.1: Complex Multi-Branch Circuit Reduction and Phasor Calculation
Problem Statement
Step 1: Transformation to the Phasor Domain
Step 2: Equivalent Impedance Reduction
Step 3: Total Supply Current Calculation
Step 4: Branch Current Calculations
Step 5: Verification using KCL
30.9.2 Example 30.2: Dual-Source AC Nodal Analysis with Phase-Shifted Sources
Problem Statement
Step 1: Formulate KCL at Node 2
Step 2: Compute Admittances and Source Current Terms
Step 3: Solve for Node Voltage Phasor 𝑽2\mathbf{V}_{2}
Step 4: Calculate Branch Currents
Step 5: Active Power Calculation for Source 1
30.9.3 Example 30.3: Locus Diagrams and Resonance Dynamics in an RLC Circuit
Problem Statement
Step 1: Resonant Frequency Calculation
Step 2: Evaluation at Sub-Resonant Frequency ω1=500 rad/s\omega_{1} = 500\text{ rad/s}
Step 3: Evaluation at Second Sub-Resonant Frequency ω2=2000 rad/s\omega_{2} = 2000\text{ rad/s}
Step 4: Locus Trajectories Analysis

30.10 SPICE Simulation Netlists and Verification Matrix

30.10.1 SPICE Simulation Netlist File: chapter30_phasor_analysis.cir
30.10.2 Quantitative Verification Matrix

Chapter 31: AC Impedance, Admittance, and Resonance

Chapter introduction

In steady-state sinusoidal analysis, linear time-invariant (LTI) networks operating under a single excitation frequency ω\omega are governed by algebraic relations in the complex frequency domain. When time-domain voltages v(t)=Vmcos(ωt+ϕv)v(t) = V_{m}cos(\omega t + \phi_{v}) and currents i(t)=Imcos(ωt+ϕi)i(t) = I_{m}cos(\omega t + \phi_{i}) are transformed into their corresponding phasor representations 𝑽=Vmejϕv\mathbf{V} = V_{m}e^{j\phi_{v}} and 𝑰=Imejϕi\mathbf{I} = I_{m}e^{j\phi_{i}}, the differential equations describing energy storage elements reduce to complex linear algebraic expressions.

Complex impedance 𝒁(ω)\mathbf{Z}(\omega) represents the operational operational ratio of the complex voltage phasor 𝑽\mathbf{V} across a two-terminal element (or network) to the complex current phasor 𝑰\mathbf{I} entering its positive terminal:

𝒁(ω)=𝑽𝑰=VmejϕvImejϕi=VmImej(ϕv−ϕi)=|𝒁|ejθz\mathbf{Z}(\omega) = \frac{\mathbf{V}}{\mathbf{I}} = \frac{V_{m}e^{j\phi_{v}}}{I_{m}e^{j\phi_{i}}} = \frac{V_{m}}{I_{m}}e^{j(\phi_{v} - \phi_{i})} = |\mathbf{Z}|e^{j\theta_{z}}

Subsections and subchapters

31.1 Fundamental Nature of Impedance and Admittance

31.1.1 Complex Impedance (𝒁\mathbf{Z}) and Admittance (𝒀\mathbf{Y}) Dualities
31.1.2 Real vs. Reactive Power and Energy Storage Dynamics
31.1.3 Frequency-Dependent Behavior of Passive Components

31.2 Generalized Reactance and Susceptance Formulations

31.2.1 Inductive Reactance (XLX_{L}) and Inductive Susceptance (BLB_{L})
31.2.2 Capacitive Reactance (XCX_{C}) and Capacitive Susceptance (BCB_{C})
31.2.3 Locus Diagrams of Impedance and Admittance in the Complex Plane
Case 1: Series R-L Circuit with Variable Frequency ω\omega
Case 2: Series R-C Circuit with Variable Frequency ω\omega

31.3 Series Resonance in RLC Networks

31.3.1 Derivation of the Series Resonant Condition
31.3.2 Frequency Response, Peak Magnitudes, and Voltage Multiplication Effect
31.3.3 Half-Power Frequencies, Bandwidth, and Quality Factor (QQ)
Lower Half-Power Frequency (ω1\omega_{1}):
Upper Half-Power Frequency (ω2\omega_{2}):

31.4 Parallel Resonance and Anti-Resonance

31.4.1 Ideal Parallel RLC Resonance
31.4.2 Practical Parallel Resonant Circuits (Tank Circuits)
31.4.3 Current Multiplication, High Impedance State, and Anti-Resonant Frequency Shift
Maximum Impedance Frequency (ωp\omega_{p}):

31.5 Quality Factor (QQ) and Energy Storage Mechanics

31.5.1 Thermodynamic and Energy-Based Definitions of QQ
31.5.2 Loaded vs. Unloaded Quality Factors
31.5.3 Relationship Between Bandwidth, Phase Slope, and Group Delay at Resonance

31.6 Resonant Network Topologies and Impedance Matching

31.6.1 L-Sections, T-Networks, and π\pi-Networks
L-Section Matching Equations (Down-Transforming: Rs>RLR_{s} > R_{L}):
T-Networks and π\pi-Networks:
31.6.2 Bandpass, Bandstop, and High-Q Filtering Configurations
31.6.3 Coupled Resonant Circuits and Mutual Inductive Resonance

31.7 Comprehensive Worked Examples and Mathematical Derivations

31.7.1 Detailed Series RLC Analysis (Exact vs. High-Q Approximations)
Problem Formulation:
Mathematical Solution:
31.7.2 Real-World Tank Circuit with Parasitic Inductor Resistance and Stray Capacitance
Problem Formulation:
Mathematical Solution:
31.7.3 Impedance Matching Network Design for High-Frequency Load Coupling
Problem Formulation:
Mathematical Solution:

31.8 Computational Modeling and SPICE Simulation

31.8.1 SPICE Deck Formulation for Resonance and Impedance Scanning
31.8.2 Quantitative Verification Matrix

Chapter 32: Active, Reactive, and Complex Power

Chapter introduction

In single-phase alternating-current (AC) networks operating under sinusoidal steady-state conditions, the physical rate of energy delivery to a two-terminal circuit element or network is governed by the instantaneous power p(t)p(t). By definition, instantaneous power is the continuous time product of the instantaneous potential difference across the terminals, v(t)v(t), and the instantaneous terminal current flowing into the element, i(t)i(t):

p(t)=v(t)i(t)p(t) = v(t)\, i(t)

Let the terminal voltage and terminal current be expressed as general steady-state sinusoidal functions operating at an angular frequency ω=2πf\omega = 2\pi f (rad/s):

v(t)=Vmcos(ωt+θv)=2Vrmscos(ωt+θv)v(t) = V_{m}cos(\omega t + \theta_{v}) = \sqrt{2}V_{rms}cos(\omega t + \theta_{v})
i(t)=Imcos(ωt+θi)=2Irmscos(ωt+θi)i(t) = I_{m}cos(\omega t + \theta_{i}) = \sqrt{2}I_{rms}cos(\omega t + \theta_{i})

Subsections and subchapters

32.1 Instantaneous Power and Energy Flow Dynamics in Sinusoidal AC Circuits

32.2 Active Power (Real Power): Energy Conversion and Physical Mechanics

Microscopic and Macroscopic Physical Realization
Purely Resistive vs. Purely Reactive Circuit Limits

32.3 Reactive Power: Reversible Energy Storage in Electromagnetic Fields

Physical Mechanics of Reactive Power Exchange
IEEE Phase and Sign Conventions

32.4 Complex Power and Apparent Power Formulations

Definition and Mathematical Derivation
Rigorous Proof of the Complex Conjugate Requirement
Apparent Power SS
Impedance and Admittance Parametric Forms

32.5 The Power Triangle and Power Factor Architecture

Vector Topology of the Power Triangle
The Power Factor (pfpf)
Grid Impact of Low Power Factor

32.6 Power Factor Correction (PFC) Engineering and Optimization

Analytical Derivation of Compensation Capacitance
Vector Geometry of Power Factor Correction
Over-Correction and Resonant Hazards

32.7 Conservation of Complex Power: Frequency-Domain Tellegen’s Theorem

Mathematical Proof via Tellegen’s Theorem
Conservation of PP and QQ vs. Non-Conservation of Apparent Power SS
Non-Applicability of Superposition to Power Calculations

32.8 Complex Power under Non-Sinusoidal and Harmonic Conditions

Harmonic Spectrum Representation
Total Active and Reactive Power
Budeanu Distortion Power DD and Apparent Power SS
True Power Factor vs. Displacement Power Factor

32.9 Comprehensive Worked Examples and Engineering Case Studies

Example 32.1: Single-Phase Load Analysis, Power Triangle Construction, and PFC Sizing
Analytical Derivation:
Example 32.2: Proof of Complex Power Conservation in a Meshed Network
Analytical Derivation:

32.10 Quantitative Verification Matrix and SPICE Simulation Protocols

SPICE Deck 1: Power Factor Correction Verification (ch32_pfc_validation.cir)
SPICE Deck 2: Tellegen’s Theorem Complex Power Conservation Deck (ch32_tellegen_proof.cir)
Quantitative Verification Matrix

Chapter 33: Advanced Network Analysis in the Laplace Domain

Chapter introduction

The analysis of dynamic linear time-invariant (LTI) electrical networks driven by arbitrary, non-sinusoidal, or transient excitations requires algebraic transformation techniques that convert linear differential equations into manageable algebraic equations. While Fourier analysis maps time-domain signals into a continuous spectrum of steady-state sinusoids, it is constrained by strict convergence criteria—specifically, a sufficient condition for an ordinary absolutely convergent transform is absolute integrability, i.e., ∫−∞∞|f(t)|dt<∞\int_{- \infty}^{\infty}|f(t)|\, dt < \infty. This condition is not necessary for every Fourier-transform interpretation: square-integrable signals and tempered distributions extend the framework. Ramps and suitable initial-condition terms can be handled with generalized transforms. The Laplace transform provides a direct initial-value method and exponential weighting for many signals that lack an ordinary Fourier integral.

The complex frequency domain, established via the Laplace transform, addresses these limitations by introducing a complex attenuation factor σ\sigma into the kernel integral. This extends functional convergence to a broad class of signals encountered in physical circuit engineering.

Subsections and subchapters

33.1 Mathematical Foundations of the Unilateral and Bilateral Laplace Transforms

Direct Integral Definitions and Regions of Convergence
Mathematical Derivations of Differentiation and Convolution Theorems
Initial Value and Final Value Theorems
Initial Value Theorem (IVT)
Final Value Theorem (FVT)

33.2 Transformed Equivalent Circuit Models (Impedance & Admittance Operators)

Energy Storage Elements and Companion Models
Resistor
Inductor
Capacitor
Coupled Inductors (Mutual Inductance)
Impedance and Admittance Operators
Generalized Kirchhoff’s Laws in the ss-Domain
Kirchhoff’s Current Law (KCL)
Kirchhoff’s Voltage Law (KVL)

33.3 Generalized ss-Domain Network Analysis Methods

Nodal Analysis in the ss-Domain via Modified Nodal Analysis (MNA)
Mesh and Loop Analysis in the ss-Domain
Generalized Thevenin and Norton Equivalent Networks
Superposition: Separating Zero-Input and Zero-State Responses
Zero-Input Response (ZIR)
Zero-State Response (ZSR)

33.4 Network Functions, Driving-Point Operators, and Transfer Functions

Formal Definition of Network Functions
Driving-Point Functions
Transfer Functions
Rational Polynomial Representation
Polynomial Properness Classifications

33.5 Singularities of Network Functions: Poles, Zeros, and Minimum Phase Properties

Definitions and Geometric Interpretations
Zeros (zjz_{j})
Poles (pip_{i})
Physical Meaning of Poles and Natural Modes
Minimum Phase versus Non-Minimum Phase Networks
Key Properties of Non-Minimum Phase Networks

33.6 System Transient and Steady-State Response Decomposition

Inverse Transformation Techniques via Partial Fraction Expansion (PFE)
Case 1: Distinct Real Poles
Case 2: Repeated (Multiple) Real Poles
Case 3: Complex Conjugate Poles
Impulse Response, Step Response, and Time-Domain Convolution
Impulse Response h(t)h(t)
Step Response s(t)s(t)
Convolution Integral Connection
Connection to Sinusoidal Steady-State Response

33.7 Stability Criteria for Electrical Networks

System Stability Definitions
BIBO Stability (Bounded-Input Bounded-Output)
Asymptotic (Internal) Stability
Marginal Stability
Pole-Location Stability Conditions
Routh-Hurwitz Stability Criterion
Necessary Condition for Stability
Construction of the Routh Array
Sufficiency Theorem (Routh’s Theorem)
Special Cases in the Routh Array
Case 1: First Element in a Row is Zero, but Other Row Elements are Non-Zero
Case 2: An Entire Row of the Array is Zero
Positive Real (PR) Functions and Passive Realizability Criteria
Definition of a Positive Real Function
Necessary and Sufficient Testing Properties for Passive Realizability

33.8 Comprehensive Multi-Loop Network Analysis and Stability Verification

Worked Example 33.1: Complete Transient Analysis of a 2nd-Order Circuit with Initial Energy States
1. Transform Circuit to ss-Domain Models
2. Nodal Matrix Formulations
3. System Solution for Output Transform Vo(s)=V2(s)V_{o}(s) = V_{2}(s)
4. Superposition Decomposition into ZIR and ZSR
5. Boundary Value Verification via IVT and FVT
Initial Value Verification:
Final Value Verification:
6. Time-Domain Partial Fraction Expansion
Worked Example 33.2: Routh-Hurwitz Stability Analysis of a 4th-Order Active Feedback Filter
1. Formulate the Characteristic Polynomial
2. Construct the Routh Array
3. Complete Routh Array Parameter Evaluation
4. Evaluate Stability Thresholds
5. Calculate Critical Oscillation Frequency ωosc\omega_{\text{osc}} at K=KcritK = K_{\text{crit}}
SPICE Simulation Verification Models
SPICE Netlist for Example 33.1 (Transient Response with Initial Conditions)
SPICE Netlist for Example 33.2 (Active Feedback Filter Stability Limit)
Quantitative Verification Matrix

Reference notice

References document correlations and cross-reference resources. Inclusion does not imply endorsement, affiliation, approval, certification or compliance. This volume retains external bibliography alongside verified references to the prior book.

Bibliography and Corresponding References

These references document topical relationships and provide routes for independent cross-reference. The author and publisher do not endorse a particular reference, product, organization or system. Listing a reference does not imply that its organization endorses this book. Correlation does not establish equivalence, certification or compliance. Installation codes, workplace practices, equipment tests, mathematical models and measured results have distinct purposes. Consult the identified edition and applicable jurisdiction; do not assume that the newest edition has been adopted locally.

NFPA documents a three-year NEC revision cycle in its cited development material. This describes that documented cycle, not a guarantee about future schedules. Edition years, publication dates and the date of this reference check are separate. Check amendments, errata, tentative interim amendments, supersession and local adoption before applying requirements.

Reference check: 2026-09-28. Each record separately identifies its edition or publication period.

https://docinfofiles.nfpa.org/files/AboutTheCodes/70/70_A2025_NEC_P16_SD_MeetingAgenda_1024.pdf

Chapter Correlation Directory

Chapter 23: corresponding references 6.

Book 1B, Chapter 23 — page 24

Chapter 24: corresponding references 4, 6.

Book 1B, Chapter 24 — page 50

Chapter 25: corresponding references 1, 2, 3, 5, 6, 10.

Book 1B, Chapter 25 — page 77

Chapter 26: corresponding references 1, 2, 3, 5, 6, 10.

Book 1B, Chapter 26 — page 95

Chapter 27: corresponding references 1, 2, 5, 6, 8.

Book 1B, Chapter 27 — page 119

Chapter 28: corresponding references 1, 2, 5, 6, 8.

Book 1B, Chapter 28 — page 147

Chapter 29: corresponding references 6, 8.

Book 1B, Chapter 29 — page 170

Chapter 30: corresponding references 3, 4, 6, 10.

Book 1B, Chapter 30 — page 192

Chapter 31: corresponding references 3, 4, 6, 10.

Book 1B, Chapter 31 — page 221

Chapter 32: corresponding references 1, 3, 4, 6.

Book 1B, Chapter 32 — page 250

Chapter 33: corresponding references 4, 6, 7, 8, 10.

Book 1B, Chapter 33 — page 272

Verified Book 01A Connections

Book 1B Chapter 30 corresponds to Book 01A Chapter 92, “Complex Numbers and Phasors.” The prior chapter provides another treatment of this topic. Compare assumptions, notation and the specific example before carrying a result between the two books.

Book 1B, Chapter 30 — page 192

Book 1B Chapter 33 corresponds to Book 01A Chapter 125, “The Laplace Transform Fundamentals.” The prior chapter provides another treatment of this topic. Compare assumptions, notation and the specific example before carrying a result between the two books.

Book 1B, Chapter 33 — page 272

Book 1B Chapter 25 corresponds to Book 01A Chapter 326, “Capacitance and Capacitors.” The prior chapter provides another treatment of this topic. Compare assumptions, notation and the specific example before carrying a result between the two books.

Book 1B, Chapter 25 — page 77

Book 1B Chapter 26 corresponds to Book 01A Chapter 339, “Inductance and Inductors.” The prior chapter provides another treatment of this topic. Compare assumptions, notation and the specific example before carrying a result between the two books.

Book 1B, Chapter 26 — page 95

Book 1B Chapter 31 corresponds to Book 01A Chapter 417, “Resonance and Frequency Response.” The prior chapter provides another treatment of this topic. Compare assumptions, notation and the specific example before carrying a result between the two books.

Book 1B, Chapter 31 — page 221

Annotated References

[1] NFPA 70, National Electrical Code

National Fire Protection Association. 2026 edition; edition year, not an asserted release date

Installation context for electrical quantities, conductors, insulation, circuit energy and equipment. Circuit calculations do not by themselves establish installation compliance. Specific article correlations require edition-specific verification; no article number is inferred from the chapter topic.

https://www.nfpa.org/codes-and-standards/nfpa-70-standard-development/70

[2] NFPA 70E, Standard for Electrical Safety in the Workplace

National Fire Protection Association. 2024 edition, fixed historical reference; not a latest-edition claim

Workplace electrical safety context, including the distinction between a circuit model and an assessment of hazards or safe work practices. NFPA’s current product catalog also presents a 2027 edition; the cited 2024 edition remains an explicitly identified reference.

https://content.nfpa.org/-/media/Project/Storefront/Catalog/Files/Code-or-topic-fact-sheets/70E2021FactSheet.pdf?rev=7953f4b4bd7e4e2eba163808ecdf0804

[3] The International System of Units (SI)

Bureau International des Poids et Mesures. 9th edition, originally 2019; 2026 update identified by the official catalog

Quantity names, dimensions, units and numerical values must remain distinct. The particular brochure revision provides the reproducible reference; the check date is not its publication date.

https://www.bipm.org/en/publications/si-brochure

[4] ITU-T G.100.1: The use of the decibel and of relative levels in speechband telecommunications

International Telecommunication Union, Telecommunication Standardization Sector. June 2015 edition; listed in force at the reference check

Connects logarithmic levels, gain and signal ratios with their communications usage. A decibel is a logarithmic ratio; a level referenced to a stated power is a different specification from a bare ratio. Speechband scope must not be silently generalized to every electrical system.

https://www.itu.int/rec/T-REC-G.100.1/en

[5] ITU-T K.20: Resistibility of telecommunication equipment installed in a telecommunication centre to overvoltages and overcurrents

International Telecommunication Union, Telecommunication Standardization Sector. November 2022 edition; approved 2022-11-29; English PDF posted 2023-03-27

Equipment stress and protection context for charge, stored energy and transient circuit response. Resistibility tests, signal performance and an installation’s protective design establish different properties.

https://www.itu.int/rec/T-REC-K.20-202211-I

[6] 6.002 Circuits and Electronics

Massachusetts Institute of Technology OpenCourseWare. Spring 2007 course materials

Independent further reading on lumped circuit models, analysis, electronic devices, energy storage and circuit dynamics. This topical correlation does not attribute the manuscript to the course.

https://ocw.mit.edu/courses/6-002-circuits-and-electronics-spring-2007/pages/syllabus/

[7] 18.06 Linear Algebra

Massachusetts Institute of Technology OpenCourseWare. Spring 2010 course materials

Matrix equations, vector spaces and linear transformations support network formulations. Matrix invertibility is a mathematical property; a physically realizable and appropriately specified circuit is an additional modeling requirement.

https://ocw.mit.edu/courses/18-06-linear-algebra-spring-2010/

[8] 18.03SC Differential Equations

Massachusetts Institute of Technology OpenCourseWare. Fall 2011 course materials

Independent treatment of ordinary differential equations, transforms, convolution, Fourier series and system methods. Initial conditions, forcing and the selected physical model determine how a mathematical solution applies to a circuit.

https://ocw.mit.edu/courses/18-03sc-differential-equations-fall-2011/pages/syllabus/syllabus/

[10] Electrical Engineering — Book 1: Electrical Principles and Circuit Theory (Book 01A)

Ronald Legarski; SOLVEFORCE®. Complete digital revision checked 2026-09-28; 2,425-page edition. This is a revision identification, not an asserted first-publication date.

Prior-book correlation supplements the external bibliography. Chapter titles and identities were checked against the current Word master. Page numbers differ among complete and individual-volume editions; use the named chapter in the stated edition.

https://solveforce.com/shop/b/books/electrical-principles-and-circuit-theory-book-01a/

[11] Aapo Hyvärinen and Erkki Oja. Independent Component Analysis: Algorithms and Applications. Neural Networks 13(4–5), 411–430, 2000. Section4.2.2.

Primary author-hosted paper supports the same-covariance Gaussian-reference definition of negentropy and distinguishes it from differential entropy. Publication year2000; source checked2026-10-01. Supporting terminology correlation, without endorsement or a claim that this volume teaches the complete ICA method.

https://www.cs.helsinki.fi/u/ahyvarin/papers/NN00new.pdf

[12] National Institute of Standards and Technology. Essential Statistical Thermodynamics. Computational Chemistry Comparison and Benchmark Database, Standard Reference Database101. Online explanation.

Supporting distinction between microscopic state descriptions and macroscopic thermodynamic quantities. A publication date for this particular online explanation was not established; checked2026-10-01 is an access date, not an invented publication date. Correlation does not imply endorsement.

https://cccbdb.nist.gov/thermox.asp

A to Z Terminology

Definitions distinguish quantities, units, mathematical objects, models and physical systems. Related chapter links identify this edition’s local pages; chapters outside this volume identify the other volume. The directory is shared across the three-volume set to support cross-reference.

A

Active filter

A frequency-selective circuit using active devices together with passive components. In this volume ideal amplifier assumptions support analysis, while finite gain and bandwidth constrain practical behavior.

Volume context: Chapter 24: Operational Amplifiers and Ideal Active Circuits — page 50

Active power

The time average of instantaneous power. It is measured in watts and is distinct from reactive power and apparent power; use the waveform and averaging interval appropriate to the system.

Book 1B, Chapter 32 — page 250

Admittance

The complex ratio of phasor current to phasor voltage for the specified port and convention. Its real part is conductance and its imaginary part is susceptance; admittance is measured in siemens.

Book 1B, Chapter 31 — page 221

Ampere

The SI unit of electric current, symbol A, equal to one coulomb per second. Here it labels input bias, active-source output and transient circuit currents. Microampere or nanoampere prefixes change scale, not the quantity’s identity. A current-source specification also needs its reference direction, compliance conditions and model assumptions; the unit alone cannot guarantee an ideal source.

Volume context: Chapter 24: Operational Amplifiers and Ideal Active Circuits — page 50

Anti-resonance

A resonant behavior associated with an impedance maximum or admittance minimum in a specified network. Loss and topology determine its actual location and magnitude.

Volume context: Chapter 31: AC Impedance, Admittance, and Resonance — page 221

Apparent power

The product of RMS voltage and RMS current for a specified port. It is the magnitude of complex power in the appropriate sinusoidal convention, but harmonic conditions require additional distinctions.

Volume context: Chapter 32: Active, Reactive, and Complex Power — page 250

B

Bandwidth

A stated frequency interval associated with a system response and a specified criterion. A cutoff convention must be supplied; bandwidth alone does not fully describe gain, phase or transient behavior.

Book 1B, Chapter 33 — page 272

Bias point

The steady operating condition about which a nonlinear circuit is analyzed. A small-signal approximation is local to this condition and does not replace the entire device characteristic.

Volume context: Chapter 23: Nonlinear DC Circuits — page 24

Bilateral Laplace transform

A transform integrating over both negative and positive time. Its region of convergence and signal assumptions are essential to interpreting poles and time-domain behavior.

Volume context: Chapter 33: Advanced Network Analysis in the Laplace Domain — page 272

C

Capacitance

The charge-to-voltage relationship of a capacitor; for a linear two-terminal capacitor with fixed geometry, C equals Q divided by V. Differential capacitance is the local derivative dQ/dV when the relationship is nonlinear.

Book 1B, Chapter 25 — page 77

Capacitance geometry

The dependence of capacitance on conductor arrangement and dielectric distribution. A formula for one ideal geometry cannot be transferred to a different structure without checking its field assumptions.

Volume context: Chapter 25: Capacitance and Electric Field Storage — page 77

Capacitor continuity

The continuity of capacitor voltage when finite current flows under the ideal capacitor relation. An imposed instantaneous voltage jump would require an impulsive current and must be explicitly modeled.

Volume context: Chapter 27: First-Order RC and RL Transients — page 119

Co-energy

An auxiliary energy-related function used in magnetic-system descriptions. It coincides numerically with stored energy under particular linear conditions but is not generally interchangeable in nonlinear systems.

Volume context: Chapter 26: Inductance and Magnetic Field Storage — page 95

Common-mode rejection

An amplifier’s relative suppression of a signal shared by its designated inputs. The ratio and its frequency and operating conditions must be specified to interpret measurement performance.

Volume context: Chapter 24: Operational Amplifiers and Ideal Active Circuits — page 50

Complete response

The total response satisfying both excitation and initial conditions, often decomposed into suitable natural and forced contributions. Keeping only one contribution can fail to satisfy the physical starting state.

Volume context: Chapter 27: First-Order RC and RL Transients — page 119

Complex power

For sinusoidal steady state using RMS phasors and the passive sign convention, S equals voltage multiplied by the complex conjugate of current. Its real and imaginary parts are active and reactive power.

Book 1B, Chapter 32 — page 250

Complex power conservation

Signed accounting of compatible complex power across a modeled sinusoidal network. It requires consistent conjugation, normalization and port signs for every contributing element.

Volume context: Chapter 32: Active, Reactive, and Complex Power — page 250

Critical damping

The repeated-root boundary between oscillatory and two-distinct-real-root second-order responses. Its numerical condition depends on the circuit’s governing coefficients and chosen normalization.

Volume context: Chapter 28: Second-Order RLC Circuit Transients — page 147

D

Damped natural frequency

The oscillation rate of an underdamped second-order natural response. It differs from the undamped characteristic frequency and is meaningful only in the applicable response regime.

Volume context: Chapter 28: Second-Order RLC Circuit Transients — page 147

Damping ratio

A dimensionless measure of damping relative to a second-order system’s characteristic frequency. It classifies response regimes but must be derived from the actual governing equation.

Volume context: Chapter 28: Second-Order RLC Circuit Transients — page 147

Dielectric absorption

A history-dependent dielectric response contributing to voltage recovery or delayed relaxation. It is a non-ideal storage behavior distinct from a single ideal capacitor and simple leakage resistance.

Volume context: Chapter 25: Capacitance and Electric Field Storage — page 77

Differential resistance

The local slope dV/dI at a device operating point. It differs from static resistance V/I and is used in a small-signal model over a limited excursion.

Book 1B, Chapter 23 — page 24

Diode exponential model

A nonlinear device approximation relating current to voltage and model parameters. Temperature, parameter selection and operating range determine whether it adequately represents the actual junction.

Volume context: Chapter 23: Nonlinear DC Circuits — page 24

Displacement current

The time-varying electric displacement contribution in Maxwell’s current balance. It connects capacitor field behavior with circuit current without requiring conduction through an ideal dielectric.

Volume context: Chapter 25: Capacitance and Electric Field Storage — page 77

Distortion power factor

A waveform-related aspect of power-factor interpretation when current or voltage is non-sinusoidal. It must be distinguished from the simple phase-angle relationship of a single-frequency model.

Volume context: Chapter 32: Active, Reactive, and Complex Power — page 250

Dot convention

A marking convention recording relative winding polarity for coupled inductors. It determines signs of mutual contributions together with declared current and voltage reference directions.

Volume context: Chapter 26: Inductance and Magnetic Field Storage — page 95

Driving-point impedance

A voltage-to-current network function evaluated at the same port under declared source and initial-condition conventions. It differs from a transfer function between separate input and output variables.

Volume context: Chapter 33: Advanced Network Analysis in the Laplace Domain — page 272

E

Electric current

The signed rate of charge transfer, measured in amperes. This volume distinguishes input bias currents, controlled output currents and idealized zero-input-current assumptions in operational-amplifier models. The ideal model is a stated approximation, not a claim that every real input current vanishes. In transient and AC analysis, retain current direction, waveform or phasor convention, and the element’s state relationship.

Volume context: Chapter 24: Operational Amplifiers and Ideal Active Circuits — page 50

Electric field energy

Energy associated with an electric field configuration and material model. In an ideal linear capacitor it relates to capacitance and voltage squared, with physical limits imposed by the dielectric.

Volume context: Chapter 25: Capacitance and Electric Field Storage — page 77

Electrical energy

Energy stored, transferred or converted electrically, measured in joules. This volume compares electric-field storage in capacitors with magnetic-field storage in inductors and follows their exchange during transients. Integrating terminal power gives energy transfer over a defined interval, while an initial state is needed for the stored-energy total. Nonlinear element models may require integration of their actual constitutive relation rather than a constant-parameter storage formula.

Volume context: Chapter 25: Capacitance and Electric Field Storage — page 77

Electrical engineering

Engineering analysis and design connecting electrical physical behavior to mathematical models. Here local device models, dynamic network functions and energy accounting support quantitative circuit predictions.

Volume context: Chapter 33: Advanced Network Analysis in the Laplace Domain — page 272

Electrical power

The rate of electrical energy transfer or conversion, measured in watts. This volume separates instantaneous power, average active power and the reactive and apparent quantities used in sinusoidal AC analysis. With RMS phasors and the passive convention, complex power uses voltage times conjugated current. A complex-power balance must retain signs and conjugation; its imaginary part is not average dissipated energy per second.

Volume context: Chapter 32: Active, Reactive, and Complex Power — page 250

Electricity

Phenomena involving charge, current, fields and energy transfer. This volume emphasizes storage, nonlinear and active circuits, transients, and sinusoidal network behavior rather than only resistive DC relations.

Volume context: Chapter 25: Capacitance and Electric Field Storage — page 77

Entropy

A quantity whose meaning depends on the stated model. Thermodynamic entropy is a state quantity measured in joules per kelvin; information entropy measures uncertainty in a specified probability distribution, with its logarithm base determining units such as bits. This volume uses entropy to discuss resistor dissipation. Electrical energy converted into heat, temperature, entropy transfer and entropy generation are distinct quantities; a sign convention for voltage or current does not establish the sign of entropy generation. See Information entropy where applicable and Negentropy for a reference-based comparison.

Volume context: 27.2.3 Physical Energy Dissipation and Entropy Dynamics in Resistors — page 124 Further reading: references [11] and [12].

Equivalent series inductance

An inductive contribution in a real capacitor’s equivalent circuit arising from construction and connections. Together with capacitance it can affect high-frequency behavior and self-resonance.

Volume context: Chapter 25: Capacitance and Electric Field Storage — page 77

Equivalent series resistance

A resistance in a capacitor or other component’s equivalent circuit representing specified losses. Its value and interpretation can depend on frequency and cannot replace every non-ideal mechanism.

Volume context: Chapter 25: Capacitance and Electric Field Storage — page 77

Exponential response

A time dependence associated with a system pole under a stated model. Its rate, initial value and forced contribution must all be retained when interpreting a first-order circuit response.

Volume context: Chapter 27: First-Order RC and RL Transients — page 119

F

Farad

The SI unit of capacitance, equal to a coulomb per volt. A rated capacitance is an element parameter; tolerance, frequency dependence, loss and voltage rating provide separate information.

Book 1B, Chapter 25 — page 77

Faraday induction

The relationship between changing magnetic flux linkage and induced electromotive force. Winding orientation and the associated sign convention are necessary for consistent inductor equations.

Volume context: Chapter 26: Inductance and Magnetic Field Storage — page 95

Feedback

The return of an output-related signal to affect an input condition. Negative feedback can support predictable closed-loop behavior when the active device remains within its valid operating range.

Volume context: Chapter 24: Operational Amplifiers and Ideal Active Circuits — page 50

Flux linkage

The winding-linked magnetic flux accounting for turns and magnetic coupling. It is the quantity entering inductive voltage relations, distinct from flux through an unspecified surface.

Volume context: Chapter 26: Inductance and Magnetic Field Storage — page 95

Forced response

The response contribution associated with an applied excitation in a specified decomposition. Its distinction from the homogeneous response depends on the model and the selected initial-condition treatment.

Volume context: Chapter 29: Sinusoidal Steady-State Response in Time Domain — page 170

Frequency

The number of cycles per unit time, measured in hertz. Angular frequency is measured in radians per second and equals two pi times frequency for a periodic sinusoid.

Book 1B, Chapter 30 — page 192

Frequency response

A model’s steady sinusoidal response as a function of frequency under compatible linear time-invariant assumptions. Both magnitude and phase are needed to characterize signal behavior.

Volume context: Chapter 29: Sinusoidal Steady-State Response in Time Domain — page 170

G

Gain

A specified output-to-input ratio. Voltage gain, current gain and power gain describe different relationships; their definitions and the loading conditions must be stated.

Book 1B, Chapter 24 — page 50

Gain-bandwidth limitation

A practical amplifier constraint linking attainable gain and frequency response under an applicable device model. Ideal closed-loop formulas require checking whether this limitation affects the intended signal.

Volume context: Chapter 24: Operational Amplifiers and Ideal Active Circuits — page 50

Graphical load line

A circuit constraint plotted with a nonlinear device characteristic to locate possible operating points. Intersections and their stability depend on the full circuit and device model.

Volume context: Chapter 23: Nonlinear DC Circuits — page 24

H

Harmonic

A sinusoidal component at an integer multiple of a fundamental frequency in a periodic signal representation. Harmonic contributions affect waveform shape and invalidate some purely single-frequency power simplifications.

Volume context: Chapter 29: Sinusoidal Steady-State Response in Time Domain — page 170

Henry

The SI unit of inductance, equal to a weber per ampere. The unit does not state whether the parameter is self, mutual, differential or constant inductance.

Book 1B, Chapter 26 — page 95

Hertz

The SI unit of frequency, symbol Hz. This volume uses hertz for sinusoidal excitation, resonance and frequency-response coordinates. Angular frequency is two pi times frequency and uses radians per second. Natural, damped and driven frequencies have different model roles; a resonance frequency does not by itself specify damping, bandwidth or a transient’s initial state.

Volume context: Chapter 31: AC Impedance, Admittance, and Resonance — page 221

Howland current source

An active circuit topology using amplifier feedback and resistor relationships to control load current. Matching, load range and amplifier constraints determine when the predicted current-source behavior holds.

Volume context: Chapter 24: Operational Amplifiers and Ideal Active Circuits — page 50

Hysteresis loss

Energy dissipation associated with cycling a magnetic material through history-dependent states. It is a field-related loss distinct from winding resistance and requires a suitable material model.

Volume context: Chapter 26: Inductance and Magnetic Field Storage — page 95

I

Impedance

The complex voltage-to-current ratio at a specified port in sinusoidal steady state. Its real part is resistance and imaginary part is reactance; it is measured in ohms and generally depends on frequency.

Book 1B, Chapter 31 — page 221

Impedance matching

Selection or transformation of a port relationship to satisfy a stated transfer objective. Reflection reduction, maximum power transfer and voltage gain are distinct objectives with different conditions.

Volume context: Chapter 31: AC Impedance, Admittance, and Resonance — page 221

Inductance

A relationship between current and magnetic flux linkage. For a linear fixed-geometry model, flux linkage is proportional to current; nonlinear magnetic systems require a more explicit operating-point description.

Book 1B, Chapter 26 — page 95

Inductor continuity

The continuity of ideal inductor current under finite applied voltage. An instantaneous current change requires an impulsive voltage in the mathematical model and must not be silently introduced.

Volume context: Chapter 27: First-Order RC and RL Transients — page 119

Initial condition

A state value specified at the start of an analysis. Capacitor voltage and inductor current commonly provide energy-storage state information; allowed discontinuities depend on the applied idealizations.

Book 1B, Chapter 27 — page 119

Initial-value transform model

A transformed circuit representation retaining energy-storage initial conditions as appropriate source terms. Omitting them changes the problem even when impedance expressions appear correct.

Volume context: Chapter 33: Advanced Network Analysis in the Laplace Domain — page 272

Input bias current

Current required at a practical amplifier input under specified conditions. It can create errors through source resistances even when the ideal input-current approximation is zero.

Volume context: Chapter 24: Operational Amplifiers and Ideal Active Circuits — page 50

Input offset voltage

A practical amplifier input-referred voltage imbalance parameter. Its effect depends on the closed-loop circuit and must be distinguished from signal input and bias-current errors.

Volume context: Chapter 24: Operational Amplifiers and Ideal Active Circuits — page 50

Instrumentation amplifier

An amplifier arrangement intended to measure differential signals while controlling input loading and common-mode response. Its performance requires actual device and circuit specifications rather than ideal symmetry alone.

Volume context: Chapter 24: Operational Amplifiers and Ideal Active Circuits — page 50

Inverting amplifier

An amplifier topology whose ideal closed-loop signal relation has opposite polarity at the specified output. Its gain follows circuit feedback and resistor relationships under valid ideal-device assumptions.

Volume context: Chapter 24: Operational Amplifiers and Ideal Active Circuits — page 50

Iteration

Repeated numerical updating used to solve nonlinear equations. Convergence criteria, starting values and residual checks are required; a returned number alone does not establish a correct operating point.

Volume context: Chapter 23: Nonlinear DC Circuits — page 24

J

Joule

The SI unit of energy, symbol J. This volume uses joules for capacitor and inductor storage and energy changes across a transient. One joule equals one watt-second, but multiplying a single power sample by a duration is justified only when the relevant power is constant or is the interval average. Keep stored energy, transferred energy and dissipated heat distinct in the balance.

Volume context: Chapter 25: Capacitance and Electric Field Storage — page 77

Joule energy

Energy expressed in SI joules, used here to track capacitor and inductor storage and dissipative transfers. Energy totals must remain distinct from instantaneous and averaged power rates.

Volume context: Chapter 25: Capacitance and Electric Field Storage — page 77

Junction diode

A semiconductor device with a nonlinear current-voltage relation. Exponential, piecewise-linear and small-signal models answer different questions and require their own validity assumptions.

Volume context: Chapter 23: Nonlinear DC Circuits — page 24

K

Kirchhoff phasor equations

Network current and voltage balances expressed with compatible phasors at a common frequency. Consistent reference directions and impedance definitions are required to preserve the time-domain circuit relations.

Volume context: Chapter 30: Sinusoidal Sources and Phasor Representation — page 192

Knee voltage

A model-dependent approximate transition used in some piecewise-linear diode descriptions. It is not a universal sharp physical threshold and depends on the chosen device and operating approximation.

Volume context: Chapter 23: Nonlinear DC Circuits — page 24

L

Laplace variable

The complex variable used in transformed network equations. It generalizes frequency-domain analysis and must retain associated initial conditions and convergence assumptions.

Volume context: Chapter 33: Advanced Network Analysis in the Laplace Domain — page 272

Leakage resistance

An equivalent resistance representing a specified leakage path in a component model. It modifies long-term behavior and loss but does not represent every dielectric non-ideality.

Volume context: Chapter 25: Capacitance and Electric Field Storage — page 77

Lenz law

The directional principle that induced effects oppose the relevant change in magnetic flux. It informs consistent winding and voltage signs rather than replacing a quantitative induction equation.

Volume context: Chapter 26: Inductance and Magnetic Field Storage — page 95

M

Magnetic core loss

Energy dissipation associated with a magnetic core under stated excitation conditions. Hysteresis and eddy-current contributions differ from winding loss and depend on material and frequency.

Volume context: Chapter 26: Inductance and Magnetic Field Storage — page 95

Magnetic saturation

A material regime in which incremental magnetic response differs substantially from a simple constant-permeability model. Inductance and waveform predictions must then use appropriate nonlinear assumptions.

Volume context: Chapter 26: Inductance and Magnetic Field Storage — page 95

Minimum-phase function

A network-function property involving pole and zero locations under a stated stability convention. It constrains relationships between magnitude and phase and cannot be inferred from a magnitude plot alone.

Volume context: Chapter 33: Advanced Network Analysis in the Laplace Domain — page 272

Mutual coupling

Interaction through shared magnetic flux between windings. Its signed contribution depends on winding orientation and coupling conventions and must be distinguished from self-inductance.

Volume context: Chapter 26: Inductance and Magnetic Field Storage — page 95

Mutual inductance

A parameter relating flux linkage in one winding to current in another under the selected magnetic model. Its sign depends on reference directions and dot convention.

Book 1B, Chapter 26 — page 95

N

Natural frequency

A characteristic frequency derived from a second-order system’s coefficients. It is distinct from the damped oscillation frequency and from a measured resonant peak in a lossy driven network.

Volume context: Chapter 28: Second-Order RLC Circuit Transients — page 147

Natural response

Circuit behavior associated with its natural modes after accounting for stored energy and the source conditions. It is distinguished from the forced response produced by applied excitation.

Book 1B, Chapter 27 — page 119

Negentropy

A reference-based entropy deficit, with the reference and constraints explicitly specified. In statistical signal analysis, a common definition compares a distribution with a Gaussian distribution of the same covariance; under the applicable finite-entropy conditions this difference is nonnegative and vanishes for the matching Gaussian. It is not simply the negative of entropy or an electrical negative terminal. This volume uses entropy to discuss resistor dissipation. Electrical energy converted into heat, temperature, entropy transfer and entropy generation are distinct quantities; a sign convention for voltage or current does not establish the sign of entropy generation. This supporting field comparison does not claim that the manuscript implements independent component analysis. A local decrease in thermodynamic entropy requires accounting for exchanges and the surroundings; see Entropy.

Volume context: 27.2.3 Physical Energy Dissipation and Entropy Dynamics in Resistors — page 124 Further reading: references [11] and [12].

Newton-Raphson method

An iterative nonlinear-equation method using local derivative information. Circuit applications require convergence and residual checks and can be sensitive to starting guesses and model discontinuities.

Volume context: Chapter 23: Nonlinear DC Circuits — page 24

Non-inverting amplifier

An amplifier topology with an ideal closed-loop output of the same signal polarity as its designated input. Its resistor-defined gain remains conditional on feedback and valid amplifier operation.

Volume context: Chapter 24: Operational Amplifiers and Ideal Active Circuits — page 50

O

Operating point

A selected steady or bias condition about which a device or network is analyzed. Incremental parameters depend on this point and do not replace the complete nonlinear characteristic.

Book 1B, Chapter 23 — page 24

Operational amplifier

An amplifier modeled through differential input behavior and output response. Ideal assumptions such as zero input current and virtual short require an appropriate feedback configuration and operating regime.

Book 1B, Chapter 24 — page 50

Overdamping

A second-order response regime with two distinct real characteristic roots under the usual passive stable model. Lack of oscillation does not by itself specify a single settling time.

Volume context: Chapter 28: Second-Order RLC Circuit Transients — page 147

Overshoot

The amount by which a transient response exceeds its specified final value or reference level. Its interpretation requires the actual initial conditions, excitation and normalization.

Volume context: Chapter 28: Second-Order RLC Circuit Transients — page 147

P

Parasitic capacitance

Unintended or distributed capacitive behavior associated with a real component or layout. It can change an inductor’s high-frequency response and produce self-resonance beyond the simplest model.

Volume context: Chapter 26: Inductance and Magnetic Field Storage — page 95

Partial fraction expansion

A rational-function decomposition used to obtain inverse transforms and response contributions. Repeated poles, polynomial terms and convergence conditions must be retained in the analysis.

Volume context: Chapter 33: Advanced Network Analysis in the Laplace Domain — page 272

Peak phasor convention

A phasor normalization using sinusoidal peak amplitude. Power expressions must include the corresponding scaling and cannot reuse RMS-normalized formulas without adjustment.

Volume context: Chapter 30: Sinusoidal Sources and Phasor Representation — page 192

Phase lag

A relation in which a compatible sinusoidal quantity follows the phase of a declared reference. Sign conventions and time representation must remain consistent when translating to phasors.

Volume context: Chapter 30: Sinusoidal Sources and Phasor Representation — page 192

Phase lead

A relation in which one compatible sinusoidal quantity reaches corresponding phase positions earlier under a declared convention. The statement requires identifying both the reference and compared quantity.

Volume context: Chapter 30: Sinusoidal Sources and Phasor Representation — page 192

Phase-space trajectory

A representation of a system’s evolution in state-coordinate space. Its interpretation depends on the chosen state variables and initial conditions rather than on time-domain waveform shape alone.

Volume context: Chapter 27: First-Order RC and RL Transients — page 119

Phasor

A complex representation of sinusoidal magnitude and phase at one frequency. State whether magnitude is peak or RMS; a phasor does not by itself represent a general transient waveform.

Book 1B, Chapter 30 — page 192

Piecewise region consistency

The check that a solution obtained from one segment of a piecewise model satisfies that segment’s assumed conditions. A solved linear equation can otherwise produce an invalid device state.

Volume context: Chapter 23: Nonlinear DC Circuits — page 24

Piecewise-linear model

An approximation replacing portions of a nonlinear characteristic with linear segments. Segment selection and boundary consistency are required before using the corresponding circuit equations.

Volume context: Chapter 23: Nonlinear DC Circuits — page 24

Pole

A singularity of a transfer function after applicable cancellations and modeling conventions are addressed. Pole location informs modal behavior, while internal stability can require examination beyond a reduced transfer function.

Book 1B, Chapter 33 — page 272

Power factor

The ratio of active power to apparent power under the stated measurement definition. For distorted waveforms, it generally differs from the cosine of the fundamental voltage-current phase angle.

Book 1B, Chapter 32 — page 250

Power factor correction

Modification of a system to improve a declared power-factor measure. Reactive compensation for sinusoidal loads must be distinguished from remedies for harmonic distortion and other non-ideal behavior.

Volume context: Chapter 32: Active, Reactive, and Complex Power — page 250

Pulse response

The circuit response to an excitation of finite duration. It requires matching conditions across pulse transitions rather than applying a step formula once for the entire timeline.

Volume context: Chapter 27: First-Order RC and RL Transients — page 119

Q

Quadrature

A phase relation of a quarter-cycle between compatible sinusoidal quantities. The lead or lag direction depends on reference convention and must accompany the stated phase separation.

Volume context: Chapter 30: Sinusoidal Sources and Phasor Representation — page 192

Quality factor

A measure associated with energy storage relative to loss or with resonance sharpness under a specified definition. The circuit configuration and approximation determine how Q relates to bandwidth.

Book 1B, Chapter 31 — page 221

R

Ramp response

A dynamic response to an excitation increasing linearly over a specified interval. Its matching and initial conditions differ from those of a step or finite pulse.

Volume context: Chapter 27: First-Order RC and RL Transients — page 119

Reactive compensation

The addition or control of reactive behavior to change a system’s power or voltage relationship. A sinusoidal correction calculation does not by itself eliminate harmonic distortion or all system losses.

Volume context: Chapter 32: Active, Reactive, and Complex Power — page 250

Reactive power

The imaginary part of complex power in sinusoidal steady state under the stated sign convention. It represents a different aspect of energy exchange from average active power; nonsinusoidal definitions require additional care.

Book 1B, Chapter 32 — page 250

Region of convergence

The domain of a transform variable in which the defining transform converges. It helps determine causality and time-domain interpretation and is not specified by an algebraic expression alone.

Volume context: Chapter 33: Advanced Network Analysis in the Laplace Domain — page 272

Resistance

The resistive voltage-current relationship of a stated model or operating condition, measured in ohms. This volume’s nonlinear DC circuits distinguish a static voltage-to-current ratio from a differential slope used for small changes. Those quantities can differ, and a local linearization is not a global device law. In AC networks, resistance is distinct from the full complex impedance and its reactive contribution.

Volume context: Chapter 23: Nonlinear DC Circuits — page 24

Resonance

A frequency-dependent condition involving energy exchange and cancellation or balance of reactive effects. Series and parallel resonance have different terminal behavior, particularly when losses are included.

Book 1B, Chapter 31 — page 221

Ripple

A periodic variation superimposed on a desired signal or level. Its frequency components and amplitude convention must be stated before comparing circuit performance.

Volume context: Chapter 29: Sinusoidal Steady-State Response in Time Domain — page 170

Rise time

A transient timing measure between explicitly stated response thresholds. Threshold selection, excitation and system behavior must accompany the value to support comparisons.

Volume context: Chapter 28: Second-Order RLC Circuit Transients — page 147

RMS phasor convention

A phasor normalization using root-mean-square amplitude. It simplifies compatible sinusoidal power expressions but must be distinguished explicitly from peak-amplitude notation.

Volume context: Chapter 30: Sinusoidal Sources and Phasor Representation — page 192

Root-mean-square value

The square root of the mean of a quantity’s squared instantaneous value over a specified interval. It differs from the ordinary mean, peak value and a phasor’s unspecified magnitude convention.

Book 1B, Chapter 30 — page 192

S

Saturation

An operating limitation in which an active device can no longer follow its assumed linear relation. Ideal amplifier gain formulas cease to predict output correctly when supply or device limits are reached.

Volume context: Chapter 24: Operational Amplifiers and Ideal Active Circuits — page 50

Self-resonance

A resonant behavior arising from a component’s own storage and parasitic effects. It marks a limitation of the simplest capacitor or inductor approximation and depends on the actual construction.

Volume context: Chapter 26: Inductance and Magnetic Field Storage — page 95

Settling time

The time required for a response to enter and remain inside a specified tolerance band. The tolerance, input, initial conditions and damping model all affect the reported value.

Volume context: Chapter 28: Second-Order RLC Circuit Transients — page 147

Slew rate

A limit on an amplifier output’s rate of change under specified conditions. It is distinct from small-signal bandwidth and can distort large-amplitude waveforms even when frequency alone seems acceptable.

Volume context: Chapter 24: Operational Amplifiers and Ideal Active Circuits — page 50

Small-signal model

A local linear approximation about a specified operating point. Incremental variables and sufficiently small excursions are essential; this model does not describe arbitrary large changes.

Volume context: Chapter 23: Nonlinear DC Circuits — page 24

SPICE

A circuit-simulation framework using device models and numerical algorithms. The volume uses simulation for comparison and verification, while model selection, solver settings and residual checks remain engineering responsibilities.

Volume context: Chapter 23: Nonlinear DC Circuits — page 24

Stability

A response property defined for a specified system, excitation class and interpretation. Pole-based conclusions require the applicable linear model and cannot be extended automatically to nonlinear operation.

Volume context: Chapter 33: Advanced Network Analysis in the Laplace Domain — page 272

Summing amplifier

A feedback circuit combining multiple inputs with weights determined by its network. Source impedances and amplifier limitations constrain the ideal linear combination.

Volume context: Chapter 24: Operational Amplifiers and Ideal Active Circuits — page 50

Susceptance

The imaginary part of admittance, measured in siemens. Its sign depends on the phasor convention and reactive element; it is distinct from reactance, the imaginary part of impedance.

Book 1B, Chapter 31 — page 221

T

Time constant

A characteristic time scale of a first-order mode. RC and L/R formulas apply to their respective equivalent models; multiple independent modes generally require multiple time constants or a higher-order description.

Book 1B, Chapter 27 — page 119

Transfer function

An input-output ratio in a transformed representation for a linear time-invariant model with the specified initial-condition convention. It characterizes a chosen input and output, not every internal state.

Book 1B, Chapter 33 — page 272

Transfer-function cancellation

An algebraic removal of common numerator and denominator factors under specified conditions. It can hide internal modes and must not automatically certify every state of a realization as stable.

Volume context: Chapter 33: Advanced Network Analysis in the Laplace Domain — page 272

Transient

The time-dependent portion of a response associated with a change of conditions. Its duration and decay depend on system modes, excitation and initial stored energy.

Book 1B, Chapter 27 — page 119

U

Underdamping

A second-order regime with decaying oscillation under the stable passive model. The oscillation frequency and envelope decay rate are separate quantities determined by the circuit coefficients.

Volume context: Chapter 28: Second-Order RLC Circuit Transients — page 147

Unilateral initial condition

The starting-state information associated with a transform beginning at a selected time origin. Correct pre-switch and post-switch conventions are necessary for storage-element equations.

Volume context: Chapter 33: Advanced Network Analysis in the Laplace Domain — page 272

Unilateral Laplace transform

A transform beginning at the designated time origin, useful for initial-value circuit problems. Correct treatment of initial stored energy is essential in transformed capacitor and inductor models.

Volume context: Chapter 33: Advanced Network Analysis in the Laplace Domain — page 272

Unit step

A function that changes from zero to one at a specified time. Its value exactly at the discontinuity depends on convention; ideal steps are mathematical representations of switching or excitation.

Book 1B, Chapter 27 — page 119

V

Virtual ground

A node held approximately near a reference potential by feedback without a direct ground connection. The approximation requires valid amplifier operation and does not create an unlimited current sink.

Volume context: Chapter 24: Operational Amplifiers and Ideal Active Circuits — page 50

Volt

The SI unit of voltage, symbol V, equal to one joule per coulomb. This volume uses volts for input offsets, output signals and capacitor state voltages. Volts are not volts per second, which describe a rate such as slew rate, or volt-seconds in an integrated inductive relation. Preserve scale prefixes, polarity and RMS-versus-peak qualifiers where applicable.

Volume context: Chapter 24: Operational Amplifiers and Ideal Active Circuits — page 50

Volt-ampere

A unit associated with apparent power in AC port descriptions. Its numerical dimensions match watts, but the physical power category and waveform conventions must remain distinct.

Volume context: Chapter 32: Active, Reactive, and Complex Power — page 250

Voltage

The electrical quantity assigned to a specified terminal pair or reference node, measured in volts. This volume distinguishes differential inputs, common-mode conditions, offset voltage and circuit output voltage in active-circuit models. An ideal op-amp’s equal-input-voltage approximation requires the applicable negative-feedback operating conditions; it is not an unconditional equality for saturation or positive feedback.

Volume context: Chapter 24: Operational Amplifiers and Ideal Active Circuits — page 50

W

Watt

The SI unit of power, symbol W, equal to one joule per second. This volume uses watts for active electrical power and real dissipative conversion. Volt-amperes label apparent power and vars label reactive power; their similar dimensions do not make those named quantities interchangeable. A power result must state its sign convention and whether it is instantaneous, averaged or a rating.

Volume context: Chapter 32: Active, Reactive, and Complex Power — page 250

Waveform crest factor

The ratio of peak magnitude to RMS magnitude for a specified waveform. It affects interpretation of source amplitudes and equipment loading and is not universally the sinusoidal value.

Volume context: Chapter 30: Sinusoidal Sources and Phasor Representation — page 192

Winding resistance

The resistive contribution of an inductor winding, producing dissipation and modifying transient and frequency behavior. It is distinct from the inductive storage mechanism and magnetic-core losses.

Volume context: Chapter 26: Inductance and Magnetic Field Storage — page 95

X

X (reactance)

The symbol X commonly denotes the imaginary part of impedance in Z = R + jX. A symbol’s identity depends on its definition; the same letter in another model may denote a different quantity.

Book 1B, Chapter 31 — page 221

X-axis frequency coordinate

The horizontal coordinate used to display a network’s frequency response. Linear and logarithmic scales convey different spacing and require explicit units and scale interpretation.

Volume context: Chapter 31: AC Impedance, Admittance, and Resonance — page 221

Y

Y (admittance)

The symbol Y commonly denotes admittance, the reciprocal of nonzero impedance. A scalar port admittance and a network admittance matrix are different mathematical objects despite sharing the symbol.

Book 1B, Chapter 31 — page 221

Y-axis response coordinate

The vertical coordinate of a response plot, which may represent magnitude, phase or another quantity. Its scale and reference determine whether a visual change corresponds to gain, power or angle.

Volume context: Chapter 31: AC Impedance, Admittance, and Resonance — page 221

Z

Zero

A transform-variable value at which a network-function numerator vanishes after appropriate cancellation analysis. A zero changes response characteristics and is distinct from a pole governing singular behavior.

Volume context: Chapter 33: Advanced Network Analysis in the Laplace Domain — page 272

Zero-crossing

An instant when a specified time-domain signal passes through its reference level. Its timing relates to phase but depends on waveform shape and cannot universally replace phasor analysis.

Volume context: Chapter 30: Sinusoidal Sources and Phasor Representation — page 192

Zero-input response

The response generated by initial state with the input set to zero under the model’s convention. It is distinct from the zero-state response caused by excitation with zero initial state.

Book 1B, Chapter 33 — page 272

Zero-state response

The response to an input when the initial state is zero. In a linear system it combines with the zero-input response to form the complete response under compatible conventions.

Book 1B, Chapter 33 — page 272

This book and its volumes