List all of the Commercial Electrician Terminology and related definitions.
- AC (Alternating Current): type of electrical current that changes direction periodically.
- Amperage: the measurement of electrical current in a circuit.
- Arc Flash Study: An analysis of an electrical system to determine the potential for an arc flash event and the appropriate safety measures to be taken.
- Arc Flash: A dangerous condition that occurs when an electrical arc causes a sudden release of energy in an electrical system, it can cause severe burns and injury.
- Bonding: The process of connecting different metal parts of an electrical system together to ensure electrical continuity and safety.
- Branch Circuit: The conductors that bring power from the main service panel or subpanel to the outlets and devices.
- Breaker Coordination Study: The process of determining the proper coordination between overcurrent protective devices to ensure power will be disconnected only to the affected area, not the entire facility.
- Breaker: A device that stops the flow of electricity in a circuit in case of an overload or short circuit.
- Busbar: A strip or bar of copper or aluminum that conduct electricity in a electrical panel or switchboard.
- Cable Schedule: A document that lists the types and sizes of cables used in an electrical system, along with their locations and termination points.
- Cable Tray: A type of conduit that is used to support and route electrical cables.
- Circuit breaker: a device that interrupts an electrical circuit in case of an overload or short circuit.
- Circuit Identification: The process of identifying the purpose and location of each circuit in a building.
- Circuit: A complete path for electrical current to flow.
- Conductor: a material that allows electricity to flow through it, such as copper or aluminum wire.
- Control Circuit: An electrical circuit that is used to control the operation of equipment or devices.
- Current: the flow of electrical charge through a circuit.
- DC (Direct Current): type of electrical current that flows in one direction.
- EGC (Equipment Grounding Conductor): A conductor that provides a path for electrical current to flow to ground in case of a fault, to protect people and equipment.
- EMT (Electrical Metallic Tubing): A type of conduit that is used to protect and route electrical wires.
- Fault Current: The amount of current flowing in an electrical circuit during a fault.
- Fault Location: The process of determining the location of a fault in an electrical system.
- Feeder: The conductors that bring power from the main service panel to the subpanels and branch circuits.
- Fuse: A safety device that interrupts the flow of electricity in a circuit in case of an overload.
- Generators: A device that converts mechanical energy into electrical energy.
- GFCI (Ground Fault Circuit Interrupter): a device that senses ground faults and interrupts power to prevent electrical shock.
- GND (Ground): It’s a reference point in an electrical circuit to which voltage is measured and the return path for electrical current in a circuit.
- Ground Loop Isolation: The process of eliminating or reducing ground loops in an electrical system to protect equipment and ensure proper operation.
- Ground Loop: A phenomenon where multiple paths to ground exist in an electrical system, it can cause current to flow in unintended paths and damage equipment.
- Ground: a reference point in an electrical circuit to which voltage is measured.
- Grounding Electrode: A conductive device that is used to establish a connection to ground in an electrical system.
- Grounding Grid: A network of conductors that are used to establish a connection to ground in an electrical system.
- Grounding System: A system that provides a low-impedance path to ground for stray electrical current.
- Grounding: The process of connecting an electrical system to the earth to ensure safety and protect against electrical shock.
- Harmonic Mitigation: The process of reducing or eliminating harmonic distortion in an electrical system.
- Harmonics: Distortion of the normal sinusoidal waveform of an electrical current caused by non-linear loads.
- Lighting Circuit: A circuit that provides power for lighting fixtures in a building.
- Lightning Protection: A system that is used to protect a building and its contents from damage caused by lightning.
- Load Flow Study: Analysis of an electrical system to determine the flow of current, voltage, and power factor under different load conditions.
- Load Shedding: The process of intentionally disconnecting certain loads from the electrical system to prevent overloading and protect equipment.
- Load: the amount of electrical power being used by a device or circuit.
- MC (Metal Clad) Cable: A type of electrical cable that is commonly used for commercial and industrial wiring, it contains multiple conductors encased in a metal sheath.
- Motor Circuit: A circuit that provides power for electric motors in a building.
- Motor Control Alarm Management: The process of monitoring and managing the alarms generated by a motor control system, to quickly identify and respond to problems.
- Motor Control Auditing: The process of evaluating the performance of a motor control system to identify areas that need improvement or meet safety standards.
- Motor Control Automation: The use of automated control systems, such as PLCs or VFDs, to control the operation of electric motors.
- Motor Control Center (MCC): A cabinet or enclosure that contains the components used to control the operation of electric motors.
- Motor Control Center: A cabinet or enclosure that contains the components used to control the operation of multiple electric motors.
- Motor Control Circuit Breaker: A breaker that is used to protect the electric motor and control circuit from overcurrent and short circuit.
- Motor Control Circuit: A circuit that controls the operation of an electric motor.
- Motor Control Commissioning: The process of testing and adjusting the components of a motor control circuit after installation to ensure proper operation and meet safety standards.
- Motor Control Contactors: A switch that is used to control the flow of electricity to an electric motor.
- Motor Control Documentation: The process of recording and maintaining information about the design, installation, operation, and maintenance of a motor control system.
- Motor Control Efficiency: The measure of how effectively a motor control system uses electrical energy to perform its intended task.
- Motor Control Enclosure: The housing or enclosure that protects the motor control components from dust, moisture, and other environmental factors.
- Motor Control Energy Management: The process of monitoring and controlling the energy consumption of a motor control system to reduce energy costs and improve efficiency.
- Motor Control Inspection: The process of inspecting the components of a motor control circuit to ensure they are functioning properly and meet safety standards.
- Motor Control Interface: The interface, such as a control panel or HMI, that is used to monitor and control the operation of an electric motor.
- Motor Control Life Cycle: The entire lifespan of a motor control system, including design, installation, operation, maintenance, and retirement.
- Motor Control Logic: The control system that is used to control the operation of an electric motor.
- Motor Control Maintenance Scheduling: The process of determining and scheduling regular maintenance activities for a motor control system to ensure proper operation and prolong the life of the equipment.
- Motor Control Maintenance: The process of inspecting, testing, and maintaining the components in a motor control circuit to ensure proper operation and prolong the life of the equipment.
- Motor Control Optimization: The process of adjusting and fine-tuning the components in a motor control circuit to improve performance and efficiency.
- Motor Control Panel: A panel that contains the components used to control the operation of an electric motor.
- Motor Control Relay: A relay that is used to control the operation of an electric motor.
- Motor Control Remote monitoring: The process of monitoring the status and performance of a motor control system remotely, using technologies such as IoT, SCADA, and cloud computing.
- Motor Control Retrofit: The process of replacing or upgrading an older motor control system to a newer and more advanced one.
- Motor Control Safety Devices: Devices like safety switch, RCD, and overcurrent protection that are used to protect the electric motor and personnel from electric shock or fire.
- Motor Control Safety: The measures taken to ensure the safe operation of an electric motor and the equipment it drives.
- Motor Control Schematic: A diagram that shows the layout and connections of the components in a motor control circuit.
- Motor Control Spare Parts Management: The process of managing and maintaining a stock of spare parts for a motor control system to ensure that they are available when needed and to minimize downtime.
- Motor Control Standards: Standards and regulations set by organizations such as the National Electric Code (NEC), the National Fire Protection Association (NFPA), and Underwriters Laboratories (UL), that dictate the design, installation, and operation of motor control systems.
- Motor Control System Arc Flash Protection: The process of protecting a motor control system from arc flash, which can cause damage to equipment or pose a burn hazard.
- Motor Control System Auditing: The process of evaluating the performance of a motor control system to identify areas that need improvement or meet safety standards.
- Motor Control System Automation and Control: The use of automated control systems, such as PLCs or VFDs, to control the operation of electric motors.
- Motor Control System Automation: The use of automated control systems, such as PLCs or VFDs, to control the operation of electric motors.
- Motor Control System Backup and redundancy: The process of providing backup and redundancy to a motor control system to ensure continuous operation in case of failure or power outage.
- Motor Control System Circuit Protection: The process of protecting the electrical circuits in a motor control system from overcurrent, short circuit, and other faults.
- Motor Control System Commissioning Checklists: A list of tasks and procedures that must be performed during the commissioning of a motor control system to ensure proper operation and meet safety standards.
- Motor Control System Commissioning: The process of testing and adjusting the components of a motor control system after installation to ensure proper operation and meet safety standards.
- Motor Control System Communication: The process of transmitting and receiving data between the components of a motor control system, using protocols such as Modbus, Profibus, or Ethernet.
- Motor Control System Compliance with Standards: The process of ensuring that a motor control system meets the standards and regulations set by organizations such as the National Electric Code (NEC), the National Fire Protection Association (NFPA), and Underwriters Laboratories (UL).
- Motor Control System Compliance: The process of ensuring that a motor control system meets the standards and regulations set by organizations such as the National Electric Code (NEC), the National Fire Protection Association (NFPA), and Underwriters Laboratories (UL).
- Motor Control System Control Logic: The control system that is used to control the operation of an electric motor.
- Motor Control System Control Panel: A panel that contains the components used to control the operation of an electric motor.
- Motor Control System Cybersecurity: The measures taken to protect a motor control system from cyber-attacks and unauthorized access.
- Motor Control System Data Logging: The process of recording and storing data from a motor control system, such as operating parameters, alarms, and energy consumption, for analysis and trending.
- Motor Control System Diagnostics: The process of identifying and diagnosing problems in a motor control system, using tools such as multimeters, oscilloscopes, and software.
- Motor Control System Documentation: The process of recording and maintaining information about the design, installation, operation, and maintenance of a motor control system.
- Motor Control System Energy Audit: The process of evaluating the energy efficiency of a motor control system and identifying opportunities for improvement.
- Motor Control System Energy Efficiency: The measure of how effectively a motor control system uses electrical energy to perform its intended task.
- Motor Control System Fail-safe Design: The process of designing a motor control system to automatically shut down or take other appropriate actions in case of a failure or emergency.
- Motor Control System Fault Detection: The process of identifying and diagnosing faults in a motor control system, using tools such as multimeters, oscilloscopes, and software.
- Motor Control System Ground Fault Protection: The process of protecting a motor control system from ground faults, which can cause damage to equipment or pose a shock hazard.
- Motor Control System Grounding: The process of connecting electrical equipment and metal parts of a building to ground to ensure proper operation and safety.
- Motor Control System Harmonic Mitigation: The process of reducing or eliminating harmonic distortion in a motor control system, to improve power quality and protect equipment.
- Motor Control System Integration with BMS: The process of integrating a motor control system with a Building Management System (BMS) to improve performance, efficiency and ensure proper operation.
- Motor Control System Integration with IAS: The process of integrating a motor control system with an Industrial Automation System (IAS) to improve performance, efficiency, and ensure proper operation.
- Motor Control System Integration: The process of integrating a motor control system with other systems and technologies, such as Building Management Systems (BMS) or Industrial Automation Systems (IAS), to improve performance and efficiency.
- Motor Control System Interface: The interface, such as a control panel or HMI, that is used to monitor and control the operation of an electric motor.
- Motor Control System Life Cycle Cost: The total cost of a motor control system over its entire lifespan, including design, installation, operation, maintenance, and retirement.
- Motor Control System Life Cycle: The entire lifespan of a motor control system, including design, installation, operation, maintenance, and retirement.
- Motor Control System Load Analysis: The process of analyzing the loads and demands placed on a motor control system, to ensure that the system is properly sized and can handle the load.
- Motor Control System Maintenance and Repairs: The process of maintaining and servicing a motor control system to ensure proper operation and prolong the life of the equipment.
- Motor Control System Maintenance Checklists: A list of tasks and procedures that must be performed during the maintenance of a motor control system to ensure proper operation and prolong the life of the equipment.
- Motor Control System Maintenance planning: The process of planning and scheduling regular maintenance activities for a motor control system to ensure proper operation and prolong the life of the equipment.
- Motor Control System Maintenance records: The process of recording and maintaining information about the maintenance activities and history of a motor control system.
- Motor Control System Motor Control Center (MCC): A cabinet or enclosure that contains the components used to control the operation of multiple electric motors.
- Motor Control System Motor Control Circuit: The electrical circuit that is used to control the operation of an electric motor.
- Motor Control System Motor Control Logic: The control system that is used to control the operation of an electric motor.
- Motor Control System Motor Control Panel (MCP): A panel that contains the components used to control the operation of an electric motor.
- Motor Control System Motor Control System: A system that is used to control the operation of an electric motor.
- Motor Control System Motor Control Unit (MCU): A device or system that is used to control the operation of an electric motor.
- Motor Control System Motor Starter Control: The process of controlling the operation of a motor starter.
- Motor Control System Motor Starter: A device that is used to start and stop an electric motor.
- Motor Control System Networking: The process of connecting and communicating between the various components of a motor control system, using protocols such as Modbus, Profibus, or Ethernet.
- Motor Control System Optimization: The process of fine-tuning and adjusting a motor control system to improve performance and efficiency.
- Motor Control System Performance Monitoring: The process of monitoring the performance of a motor control system, to ensure proper operation and identify any potential problems.
- Motor Control System PLC Programming: The process of programming a Programmable Logic Controller (PLC) to control the operation of an electric motor.
- Motor Control System Power Analysis: The process of analyzing the power supply and distribution in a motor control system, to ensure proper operation and protect equipment.
- Motor Control System Power Factor Correction: The process of adjusting the power factor of a motor control system to improve the efficiency and reduce power losses.
- Motor Control System Power Quality: The measure of the steady state and dynamic electrical characteristics of a power source, important to maintain power quality to prevent damage to equipment and ensure proper operation.
- Motor Control System Protective Relaying: The process of using relays to protect a motor control system from overcurrent, undervoltage, and other faults.
- Motor Control System Reliability: The measure of how consistently and effectively a motor control system performs its intended function over time.
- Motor Control System Remote Access: The ability to access and control a motor control system remotely, using technologies such as IoT, SCADA, and cloud computing.
- Motor Control System Remote Diagnostics: The process of identifying and diagnosing problems in a motor control system remotely, using technologies such as IoT, SCADA, and cloud computing.
- Motor Control System Remote Monitoring and Control: The process of monitoring and controlling a motor control system remotely, using technologies such as IoT, SCADA, and cloud computing.
- Motor Control System Remote Support: The process of providing remote technical support for a motor control system, using technologies such as IoT, SCADA, and cloud computing.
- Motor Control System Remote troubleshooting: The process of identifying and resolving problems in a motor control system remotely, using technologies such as IoT, SCADA, and cloud computing.
- Motor Control System Retrofits: The process of replacing or upgrading an older motor control system to a newer and more advanced one.
- Motor Control System Safety audits: The process of evaluating the safety of a motor control system, identifying hazards and non-compliance with safety standards.
- Motor Control System Safety Devices: Devices like safety switch, RCD, and overcurrent protection that are used to protect the electric motor and personnel from electric shock or fire.
- Motor Control System Safety Interlocks: The process of using mechanical or electrical interlocks to prevent dangerous or unintended operation of a motor control system.
- Motor Control System Safety training: The process of educating individuals on the proper design, installation, operation, and maintenance of a motor control system, with emphasis on safety.
- Motor Control System Safety: The measures taken to ensure the safe operation of a motor control system and to protect personnel from hazards such as electrical shock, fire, and explosion.
- Motor Control System Spare Parts Inventory: The process of managing and maintaining a stock of spare parts for a motor control system to ensure that they are available when needed and to minimize downtime.
- Motor Control System Surge Protection: The process of protecting a motor control system from damage caused by power surges and transients.
- Motor Control System Sustainability: The measures taken to ensure that a motor control system is designed, installed, and operated in a manner that is environmentally friendly and sustainable.
- Motor Control System Temperature Monitoring: The process of monitoring the temperature of a motor control system, to ensure proper operation and protect equipment.
- Motor Control System Training: The process of educating individuals on the proper design, installation, operation, and maintenance of a motor control system.
- Motor Control System Troubleshooting: The process of identifying and resolving problems in a motor control system, using tools such as multimeters, oscilloscopes, and software.
- Motor Control System Upgrades: The process of replacing or upgrading the components in a motor control system to improve performance and efficiency.
- Motor Control System Upkeep cost: The cost associated with maintaining and servicing a motor control system to ensure proper operation and prolong the life of the equipment.
- Motor Control System Upkeep: The process of maintaining and servicing a motor control system to ensure proper operation and prolong the life of the equipment.
- Motor Control System Voltage Regulation: The process of regulating the voltage supplied to a motor control system, to ensure proper operation and protect equipment.
- Motor Control System Wiring Diagrams: Diagrams that show the layout and connections of the components in a motor control system.
- Motor Control Testing: The process of testing the components of a motor control circuit to ensure they are functioning properly and meet safety standards.
- Motor Control Training: The process of educating individuals on the proper design, installation, operation, and maintenance of a motor control system.
- Motor Control Transformer: A transformer that is used to step down the voltage to the electric motor.
- Motor Control Troubleshooting: The process of identifying and resolving problems in a motor control circuit.
- Motor Control Upgrade Planning: The process of identifying the need for an upgrade, assessing the current system, and developing a plan to upgrade the system.
- Motor Control Upgrade: The process of replacing or upgrading the components in a motor control circuit to improve performance and efficiency.
- Motor Control Wiring: The wiring that is used to connect the components of a motor control circuit.
- Motor Disconnect: A device that is used to disconnect power to an electric motor in case of maintenance or emergency.
- Motor Overload Protection: A device that is used to protect an electric motor from damage due to excessive current.
- Motor Protection Circuit: A circuit that provides protection for an electric motor against overcurrent, overload, and short circuit.
- Motor Run Capacitor: A capacitor that is used to improve the power factor of an electric motor and to provide smooth operation.
- Motor Start Capacitor: A capacitor that is used to provide an extra boost of power to an electric motor during start-up.
- Motor Starters: A device that controls the starting and stopping of an electric motor.
- NEC (National Electric Code): a set of safety guidelines for electrical systems and equipment.
- NEMA (National Electrical Manufacturers Association): An organization that sets standards for electrical equipment and devices.
- Neutral: the return path for electrical current in a circuit.
- NRTL (Nationally Recognized Testing Laboratory): An organization that tests and certifies electrical equipment and devices to ensure they meet safety standards.
- Open Circuit: A break in an electrical circuit that prevents current from flowing.
- Outlet: a point in an electrical circuit where power is supplied to an appliance or device.
- Overcurrent: A current that exceeds the capacity of an electrical circuit or device, it can cause damage to equipment and be a fire hazard.
- Overload: A condition in an electrical circuit where the current exceeds the rated capacity of the circuit or device.
- Panel: a device that contains circuit breakers or fuses that control the distribution of electricity in a building.
- PLC (Programmable Logic Controller): A device that is used to control industrial processes and machinery.
- Power Factor Correction: The process of adjusting the power factor in an electrical system to improve the efficiency of the system.
- Power Factor: The ratio of real power to apparent power in an electrical circuit.
- Power Monitoring: The process of measuring and monitoring the electrical characteristics of a power source to ensure proper operation and identify any potential problems.
- Power Quality Analysis: The process of measuring and analyzing the electrical characteristics of a power source to determine if it meets the necessary standards.
- Power Quality Audit: A systematic and comprehensive evaluation of the power quality characteristics of an electrical system.
- Power Quality Mitigation: The process of reducing or eliminating power quality problems in an electrical system.
- Power Quality: The measure of the steady state and dynamic electrical characteristics of a power source, it’s important to maintain power quality to prevent damage to equipment and ensure proper operation.
- PPE (Personal Protective Equipment): Equipment worn to reduce exposure to a number of risks.
- RCD (Residual Current Device): A safety device that senses any leakage of current and interrupts power to prevent electrical shock.
- RMS (Root Mean Square): A measure of the effective value of an alternating current or voltage.
- Romex: A type of electrical wire that is commonly used for residential wiring.
- Ron Legarski: General Electrician and Telecommunications Agent at SolveForce.
- Safety Switch: A switch that is used to disconnect power in case of an emergency or fault.
- SDS (Selective Coordination Study): The process of determining the selective coordination between overcurrent devices, it’s to ensure power will be disconnected only to the affected area, not the entire facility.
- Service Entrance: The point where the electrical service from the utility company enters a building.
- Short Circuit Current Rating (SCCR): The maximum short circuit current that a device or system is able to withstand without damage.
- Short Circuit: A sudden and unintended connection between two points in an electrical circuit, which allows current to flow through an unintended path.
- Single-Phase: An electrical system that uses one phase to distribute power.
- Subpanel: A smaller electrical panel that is connected to the main service panel and is used to distribute power to specific areas or circuits in a building.
- Surge Protector: A device that protect electronic equipment from voltage spike.
- Switch: A device that controls the flow of electricity in a circuit.
- System Ground: The connection of all electrical equipment and metal parts of a building to ground.
- THHN (Thermoplastic High Heat-Resistant Nylon-Coated): A type of electrical wire that is commonly used for commercial and industrial wiring.
- Three-Phase: An electrical system that uses three phases to distribute power.
- Transformer: A device that changes the voltage of an electrical circuit.
- Transient Voltage: A sudden increase in voltage that can occur in an electrical system, it can cause damage to equipment and be a fire hazard.
- UL (Underwriters Laboratories): A testing and certification organization that ensures electrical equipment and devices meet safety standards.
- UPS (Uninterruptible Power Supply): A device that provides backup power in case of a power outage.
- Voltage Drop Calculation: The process of determining the voltage drop that occurs in an electrical circuit due to resistance in the conductors and other components.
- Voltage Drop: The decrease in voltage that occurs when current flows through a conductor.
- Voltage: the measure of electrical potential energy in a circuit.
- Wiring: the electrical system that connects all the components of a building together.
The terms listed above and their definitions cover a wide range of topics within the field of commercial electrician and motor control systems.