- AC resistance: the resistance of an inductor to alternating current, typically much higher than the resistance to direct current.
- Air core inductor: an inductor that does not use a magnetic core.
- Air-core inductor: an inductor that does not have a ferromagnetic core, typically made of a coil of wire
- Bullet Point List All SI Unit Henries Symbol (H) Terminology And Related Definitions.
- Coil: a winding of wire used in an inductor to create a magnetic field
- DC resistance: the resistance of an inductor to direct current, which is typically much lower than the resistance to alternating current.
- Eddy current: circulating currents induced in a conductor by a changing magnetic field.
- Electromagnetic induction: the phenomenon in which a changing magnetic field induces an electric current in a conductor.
- Faraday’s law of electromagnetic induction: a fundamental law of electromagnetism that describes how a changing magnetic field induces an electric current in a conductor.
- Ferrite core inductor: an inductor that uses a magnetic core made of ferrite.
- Ferromagnetic materials: materials that exhibit a strong magnetic field when magnetized.
- Inductance multiplier: an electronic circuit that increases the inductance of a circuit or component
- Inductance per unit area: the inductance of a planar conductor or transmission line per unit area, measured in henries per square meter (H/m^2)
- Inductance per unit length: the inductance of a linear conductor or transmission line per unit length, measured in henries per meter (H/m)
- Inductance: the property of an electrical circuit that opposes changes in current flow
- Inductive amplifier: a type of amplifier that uses an inductor to increase the current or voltage of a signal.
- Inductive amplifier: an amplifier that uses the principle of electromagnetic induction to amplify an electrical signal.
- Inductive angle sensor: a type of inductive sensor that is used to measure the angular position of a metallic object.
- Inductive charge: the process of charging an inductive circuit or component using the principle of electromagnetic induction.
- Inductive charging coil: the component of an inductive charging system that generates the magnetic field used to transfer power wirelessly.
- Inductive charging pad: a device that uses electromagnetic induction to charge a device wirelessly.
- Inductive charging pad: a device that uses electromagnetic induction to transfer power wirelessly to a device placed on it.
- Inductive charging: a method of charging an electrical device wirelessly by transferring energy through electromagnetic induction.
- Inductive charging: a method of wirelessly transferring energy from a source to a device using electromagnetic induction.
- Inductive charging: a method of wirelessly transferring energy to a device by creating an electromagnetic field between a charging base and a receiving device.
- Inductive charging: a method of wirelessly transmitting electrical energy to a device using electromagnetic induction
- Inductive charging: the process of charging an electronic device by using the principle of electromagnetic induction to transfer energy wirelessly.
- Inductive choke: a type of inductor that is used to block high-frequency signals while allowing low-frequency signals to pass through.
- Inductive coil: a component consisting of a conductor, typically in the form of a wire, that is wound around a core to create an inductor.
- Inductive core: the component, typically made of ferromagnetic material, around which the wire is wound in an inductive coil.
- Inductive coupling circuit: a circuit that uses electromagnetic induction to transfer energy between two or more components.
- Inductive coupling coefficient of mutual energy: the ratio of the mutual energy stored in two circuits to the product of their individual self-energies.
- Inductive coupling coefficient of mutual flux: the ratio of the mutual flux linking two circuits to the product of their individual self-fluxes.
- Inductive coupling coefficient of mutual force: the ratio of the mutual force exerted between two circuits to the product of their individual self-forces.
- Inductive coupling coefficient of mutual impedance: the ratio of the mutual impedance between two circuits to the product of their individual self-impedances.
- Inductive coupling coefficient of mutual inductance: the ratio of the mutual inductance between two circuits to the product of their individual self-inductances.
- Inductive coupling coefficient of mutual power: the ratio of the mutual power transferred between two circuits to the product of their individual self-powers.
- Inductive coupling coefficient: a measure of the degree of coupling between two inductors.
- Inductive coupling coefficient: a measure of the degree of inductive coupling between two circuits, normalized with respect to the self-inductance of each circuit.
- Inductive coupling coefficient: a measure of the degree of mutual inductance between two inductors.
- Inductive coupling coefficient: a measure of the mutual inductance between two circuits or components, typically measured in henries per ampere (H/A)
- Inductive coupling coefficient: a measure of the strength of the electromagnetic coupling between two inductive circuits or components.
- Inductive coupling coefficient: the ratio of the induced electromotive force in a circuit to the rate of change of the magnetic flux linking it.
- Inductive coupling in wireless charging: the process of transferring energy wirelessly through electromagnetic induction in wireless charging systems.
- Inductive coupling interference: interference caused by the electromagnetic induction between two or more circuits or devices that are in close proximity to each other.
- Inductive coupling interference: unwanted electrical interference caused by the proximity of two or more inductive circuits to each other.
- Inductive coupling loss: the loss of energy that occurs during the transfer of energy from one inductive circuit to another by electromagnetic induction.
- Inductive coupling loss: the loss of power or signal caused by the electromagnetic induction between two or more circuits or devices that are in close proximity to each other.
- Inductive coupling noise: unwanted electrical noise caused by the electromagnetic induction between two or more circuits or devices that are in close proximity to each other.
- Inductive coupling theory: the study of the principles and mathematical models that describe the interaction between two or more electromagnetic fields in an inductive circuit.
- Inductive coupling: a mechanism by which energy is transferred between two inductors without the need for a direct connection.
- Inductive coupling: a type of electromagnetic coupling in which energy is transferred between two circuits through a shared inductor.
- Inductive coupling: the transfer of energy between two circuits or components through a mutual inductance
- Inductive coupling: the transfer of energy between two inductive circuits that are in close proximity to each other.
- Inductive coupling: the transfer of energy between two inductors through a shared magnetic field.
- Inductive coupling: the transfer of energy between two or more circuits or devices through electromagnetic induction.
- Inductive coupling: the transfer of energy from one inductive circuit or component to another by electromagnetic induction.
- Inductive coupling: the transfer of energy or signals between two or more inductive circuits or components that are in close proximity to each other.
- Inductive current limiter: an electronic circuit that limits the current flowing in an inductive circuit to prevent damage to the circuit or component.
- Inductive current measurement: the process of measuring the current in an inductive circuit by sensing the magnetic field produced by the current.
- Inductive current regulator: a device that uses an inductor to regulate the current in a circuit.
- Inductive current sensor circuit: an electronic circuit that uses an inductive current sensor to measure the current flowing in an electrical circuit.
- Inductive current sensor: a sensor that measures the current flowing in an electrical circuit using electromagnetic induction
- Inductive current sensor: a sensor that uses the principle of electromagnetic induction to measure the current in an electrical circuit.
- Inductive current transducer: a device that converts a current in an electrical circuit into an output signal that can be measured or processed.
- Inductive current transformer: a device that uses the principle of electromagnetic induction to measure the current flowing in a circuit, typically used in power systems applications.
- Inductive current transformer: a type of transformer that uses electromagnetic induction to measure the current flowing in an electrical circuit.
- Inductive current: the current flowing through an inductor.
- Inductive discharge: the process of releasing energy stored in an inductive circuit or component by disrupting the magnetic field.
- Inductive discharge: the process of releasing stored energy from an inductive circuit or component by interrupting the current flowing through it.
- Inductive displacement sensor: a type of inductive sensor that is used to measure the distance between the sensor and a metallic object.
- Inductive encoder: a type of rotary encoder that uses electromagnetic induction to measure the position of a rotating shaft
- Inductive energy conversion: the process of converting energy from one form to another in an inductive circuit or component, such as converting electrical energy to magnetic energy or vice versa.
- Inductive energy dissipation: the process of converting energy stored in an inductive circuit or component into heat.
- Inductive energy efficiency: the ratio of the useful energy output of an inductive circuit or component to the total energy input.
- Inductive energy harvesting: the process of capturing and utilizing energy that is naturally present in an inductive circuit or environment, such as electromagnetic waves.
- Inductive energy loss: the loss of energy that occurs in an inductive circuit or component due to resistance, reactance, or other factors.
- Inductive energy management: the process of controlling and optimizing the energy usage of an inductive circuit or system.
- Inductive energy measurement: the process of determining the amount of energy present in an inductive circuit or component.
- Inductive energy monitoring: the process of observing and recording the energy usage of an inductive circuit or system over time.
- Inductive energy storage density: the amount of energy stored in an inductive circuit or component per unit volume or weight.
- Inductive energy storage system: an electrical energy storage system that stores energy in a magnetic field created by the flow of electric current through a coil.
- Inductive energy storage: method of electrical energy storage in which energy is stored in a magnetic field created by the flow of electric current through a coil.
- Inductive energy storage: the process of storing energy in an inductive circuit or component by creating a magnetic field.
- Inductive energy storage: the process of storing energy in an inductive circuit or component using the principle of electromagnetic induction.
- Inductive energy storage: the process of storing energy in an inductive circuit or component, such as an inductor.
- Inductive energy transfer: the process of transferring energy from one inductive circuit or component to another by electromagnetic induction.
- Inductive fault current: the current that flows in an inductive circuit or component due to a fault or abnormal condition.
- Inductive fault detection: the process of detecting abnormal conditions or faults in an inductive circuit or component by monitoring its current, voltage, or other electrical parameters.
- Inductive fault diagnosis: the process of identifying and diagnosing problems or faults in an inductive circuit or component.
- Inductive fault protection: the process of protecting an inductive circuit or component from damage due to abnormal conditions or faults by interrupting the current flowing through it.
- Inductive filter: a circuit or device that uses inductors to remove unwanted high-frequency signals from a signal.
- Inductive filter: a device that uses inductive elements to remove unwanted high-frequency signals from a circuit.
- Inductive flaw detector: a type of inspection equipment that uses electromagnetic induction to detect defects or variations in the material properties of a metal object.
- Inductive flow sensor: a type of sensor that uses electromagnetic induction to measure the flow rate of a fluid in a pipe.
- Inductive fuel level sensor: a sensor that uses electromagnetic induction to measure the level of fuel in a tank.
- Inductive heating: a method of heating a material by passing an electric current through it, causing it to resist the current flow and generate heat through electromagnetic induction
- Inductive heating: a method of heating a material using an alternating current flowing through an inductor to create a magnetic field that induces eddy currents in the material.
- Inductive heating: a method of heating a metal object by passing an alternating current through it, which induces eddy currents that generate heat.
- Inductive heating: a process in which an electrical current is passed through an inductive coil, creating an oscillating magnetic field that induces heat in a nearby conductive material.
- Inductive heating: a process of heating an object or material using inductive principles.
- Inductive heating: the process of heating an object or material by passing an alternating current through an inductive coil that creates a magnetic field, which induces an electric current in the object or material.
- Inductive impedance: the combination of resistance and reactance in an inductive circuit, measured in ohms (Ω)
- Inductive impedance: the combined opposition to alternating current flow in an inductive circuit, taking into account both inductive reactance and resistance.
- Inductive impedance: the opposition to alternating current in an inductive circuit, equal to the ratio of the voltage to the current.
- Inductive impedance: the total opposition to the flow of alternating current in an inductive circuit or component, which includes both its reactance and resistance.
- Inductive impedance: the total opposition to the flow of alternating current in an inductive circuit, including both resistance and reactance, measured in ohms.
- Inductive impedance: total opposition to an AC current presented by an inductor, which is the vector sum of its resistance and reactance.
- Inductive inductor: a passive component that stores energy in a magnetic field when electric current flows through it.
- Inductive interference: unwanted signals that can interfere with the operation of an inductive circuit or component.
- Inductive kickback: the voltage spike caused by the collapsing magnetic field of an inductor when the current flowing through it is abruptly interrupted.
- Inductive kickback: the voltage spike that occurs when an inductive load is suddenly disconnected from a power source
- Inductive linear position sensor: a type of inductive sensor that is used to measure the position of a metallic object along a linear path.
- Inductive link: a wireless communication system that uses electromagnetic induction to transfer information between two devices.
- Inductive liquid level sensor: a type of sensor that uses electromagnetic induction to measure the level of a liquid in a container.
- Inductive load analysis: the process of analyzing the performance or properties of an inductive circuit or component using mathematical models, simulations, or experimental data.
- Inductive load analysis: the process of evaluating the performance and behavior of an inductive circuit or system to identify issues and opportunities for improvement.
- Inductive load balancing algorithm: a set of instructions or rules used to distribute the load in an electrical circuit evenly across multiple components.
- Inductive load balancing relay: a device that monitors the current and voltage in multiple inductive circuits and adjusts them to ensure they are balanced.
- Inductive load balancing: the process of distributing the current and voltage evenly across multiple inductive circuits in a system to ensure stable operation and prevent damage.
- Inductive load balancing: the process of distributing the load in an electrical circuit evenly across multiple components to ensure optimal performance and prevent damage.
- Inductive load balancing: the process of evenly distributing the current flowing through an inductive circuit or component to improve efficiency and prolong its life.
- Inductive load bank calibration: the process of adjusting an inductive load bank to ensure that it provides accurate and consistent test results.
- Inductive load bank rental: a service that rents out inductive load banks for testing and measurement purposes.
- Inductive load bank testing procedure: a set of steps or instructions for performing testing on an electrical circuit using an inductive load bank.
- Inductive load bank testing: a method of testing the performance of an electrical circuit by simulating an inductive load using an inductive load bank.
- Inductive load bank testing: a type of testing where the inductive load bank is used to simulate the inductive load in a power system or equipment and measure its performance under various conditions.
- Inductive load bank: a device used to simulate an inductive load in an electrical circuit for testing and measurement purposes
- Inductive load bank: a device used to simulate an inductive load in testing or commissioning of power systems.
- Inductive load bank: a device used to test the performance and efficiency of electrical generators and other equipment by simulating an inductive load.
- Inductive load bank: a device used to test the performance of electrical equipment under inductive load conditions.
- Inductive load bank: a type of load bank that uses inductive load to simulate the load conditions of an electrical power system.
- Inductive load compensation control: the process of controlling the circuit’s parameters to compensate for changes in the load or system conditions in an inductive circuit.
- Inductive load compensation strategy: a plan or method used to compensate for changes in the load or system conditions in an inductive circuit.
- Inductive load compensation: the process of adjusting the circuit’s parameters to compensate for changes in the load or system conditions in an inductive circuit.
- Inductive load compensation: the process of adjusting the parameters of an inductive circuit or system to counteract the effects of other loads or external factors.
- Inductive load control: the process of adjusting the current and voltage in an inductive circuit or system to regulate its operation and achieve desired performance.
- Inductive load current: the current flowing through an inductive load.
- Inductive load diagnosis: the process of identifying and diagnosing problems in an inductive circuit or system.
- Inductive load disturbance compensation: the process of adjusting the circuit’s parameters to compensate for changes caused by a disturbance in an inductive circuit.
- Inductive load disturbance detection: the process of identifying and detecting changes in the current or voltage in an inductive circuit caused by external factors such as equipment failure or power outages.
- Inductive load disturbance isolation: the process of isolating the source of a disturbance in an inductive circuit to prevent further damage or disruption to the circuit or system.
- Inductive load disturbance mitigation: the process of reducing the impact of a disturbance in an inductive circuit by adjusting the load or the circuit’s parameters.
- Inductive load disturbance: any sudden or unexpected change in the current or voltage in an inductive circuit, caused by external factors such as equipment failure or power outages.
- Inductive load dynamic analysis: the process of analyzing the dynamic response of an inductive circuit to changes in load conditions.
- Inductive load dynamic compensation: the process of adjusting the circuit’s parameters to compensate for changes in load conditions over time in an inductive circuit.
- Inductive load dynamic control: the process of controlling the current and voltage in an inductive circuit to ensure stable operation over time despite changes in load conditions.
- Inductive load dynamic measurement: the process of measuring the current and voltage in an inductive circuit over time to determine its dynamic response to changes in load conditions.
- Inductive load dynamic modeling: the process of developing mathematical models of an inductive circuit to predict its dynamic response to changes in load conditions.
- Inductive load dynamic response: the change in current and voltage in an inductive circuit over time due to changes in load conditions.
- Inductive load dynamic simulation: the process of creating a computer model of an inductive circuit to predict its dynamic response to changes in load conditions.
- Inductive load dynamic stability: the ability of an inductive circuit to maintain a stable current and voltage over time despite changes in load conditions.
- Inductive load dynamic testing: the process of testing an inductive circuit by subjecting it to a range of dynamic load conditions and measuring its response.
- Inductive load energy auditing: the process of measuring and analyzing energy usage in an inductive circuit to identify opportunities for optimization.
- Inductive load energy conservation: the process of reducing energy usage in an inductive circuit to minimize costs and environmental impact.
- Inductive load energy efficiency: the ratio of useful energy output to energy input in an inductive circuit.
- Inductive load energy management: the process of controlling the energy usage in an inductive circuit to optimize efficiency and reduce costs.
- Inductive load energy monitoring: the process of measuring and tracking energy usage in an inductive circuit to identify trends and optimize performance.
- Inductive load energy optimization: the process of adjusting the circuit’s parameters to maximize energy efficiency in an inductive circuit.
- Inductive load energy recovery: the process of capturing and reusing energy that would otherwise be lost in an inductive circuit.
- Inductive load energy storage: the ability of an inductive circuit to store energy in its magnetic field, which can be released back into the circuit as needed.
- Inductive load estimation error: the difference between the estimated and actual current, voltage, or power in an inductive circuit.
- Inductive load estimation: the process of determining the approximate value of the inductance of a circuit or component.
- Inductive load estimation: the process of estimating the current, voltage, or power in an inductive circuit using mathematical models or measurement data.
- Inductive load factor: a measure of how inductive a load is, used in power systems analysis.
- Inductive load factor: a measure of the ratio of the average load to the peak load in an electrical system.
- Inductive load factor: the ratio of the actual inductive load in a circuit to the apparent load, typically used in power factor correction calculations
- Inductive load fault clearance: the process of removing a fault from an inductive circuit, such as by replacing a damaged component.
- Inductive load fault detection relay: a device that monitors the current and voltage in an inductive circuit and automatically disconnects the circuit if a fault is detected.
- Inductive load fault detection: identifying and diagnosing faults in an inductive circuit, such as short circuits or open circuits.
- Inductive load fault diagnosis relay: a device that monitors the current and voltage in an inductive circuit and provides information about the cause of a fault.
- Inductive load fault diagnosis: the process of determining the root cause of a fault in an inductive circuit.
- Inductive load fault isolation relay: a device that monitors the current and voltage in an inductive circuit and automatically isolates a faulty component or circuit to prevent further damage.
- Inductive load fault isolation: the process of isolating a faulty component or circuit in an inductive circuit to prevent further damage and allow for repairs.
- Inductive load fault management relay: a device that monitors the current and voltage in an inductive circuit and provides information and control for fault identification, diagnosis, isolation, and repair.
- Inductive load fault management: the process of identifying, diagnosing, isolating, and repairing faults in an inductive circuit or system.
- Inductive load fault tolerance: the ability of an inductive circuit or system to continue operating safely in the event of a fault or failure.
- Inductive load forecasting algorithm: a set of instructions or rules used to estimate the future load on an inductive circuit using historical data or mathematical models.
- Inductive load forecasting: the process of estimating the future load on an inductive circuit using historical data or mathematical models.
- Inductive load frequency control: the process of controlling the frequency of an electrical circuit by adjusting the load or the circuit’s parameters.
- Inductive load harmonic analysis: the process of analyzing the harmonic content of the current or voltage in an inductive circuit to identify and quantify distortion.
- Inductive load harmonic distortion: deviation from a sinusoidal waveform caused by nonlinear loads in an inductive circuit.
- Inductive load harmonic mitigation: the process of reducing or eliminating harmonic distortion in an inductive circuit by adjusting the load or the circuit’s parameters.
- Inductive load identification: the process of determining the characteristics of an inductive load, such as its inductance and resistance, using measurement data or mathematical models.
- Inductive load impedance: the opposition to the flow of current in an inductive circuit, measured in ohms (Ω)
- Inductive load loss: the loss of energy that occurs in an inductive load due to resistance or other factors.
- Inductive load maintenance: the process of performing regular checks and repairs to an inductive circuit or system to ensure it continues to operate properly.
- Inductive load management control: the process of controlling the current and voltage in an inductive circuit to ensure safe and efficient operation of the circuit or system.
- Inductive load management strategy: a plan or method used to manage the load in an inductive circuit to ensure safe and efficient operation.
- Inductive load management system: a system that controls the current and voltage in an inductive circuit to ensure safe and efficient operation of the circuit or system.
- Inductive load management: the process of controlling the current and voltage in an inductive circuit to ensure safe and efficient operation of the circuit or system.
- Inductive load management: controlling the current flow in an inductive circuit or component to improve efficiency, reduce heat generation and prolong its life.
- Inductive load management: the process of monitoring, controlling, and optimizing the performance of an inductive circuit or system.
- Inductive load measurement uncertainty: the degree of uncertainty in the measurement of the current, voltage, or power in an inductive circuit, due to measurement error or other factors.
- Inductive load measurement: the process of determining the actual value of the inductance of a circuit or component.
- Inductive load measurement: the process of measuring the current, voltage, or power in an inductive circuit using appropriate instrumentation.
- Inductive load model validation: the process of verifying the accuracy of a mathematical model of an inductive load by comparing it to measurement data.
- Inductive load modeling: creating a mathematical model of an inductive circuit or component to simulate its behavior and predict its performance under various conditions.
- Inductive load modeling: the process of creating a mathematical model of an inductive load to predict its behavior and performance under different conditions.
- Inductive load modeling: mathematically representing an inductive circuit or system to analyze its behavior and predict its performance under different conditions.
- Inductive load monitoring: the process of observing and recording the performance and behavior of an inductive circuit or system over time.
- Inductive load optimization: adjusting the load or the circuit’s parameters in an inductive circuit to achieve optimal performance and efficiency.
- Inductive load optimization: the process of adjusting the parameters of an inductive circuit or system to improve its performance or efficiency.
- Inductive load power factor correction: the process of adjusting the circuit’s parameters to improve the power factor in an inductive circuit.
- Inductive load power factor: the ratio of real power to apparent power in an inductive circuit, used to measure how effectively the circuit is utilizing the power it receives.
- Inductive load power: the power consumed by an inductive load.
- Inductive load protection relay: a device that monitors the current and voltage in an inductive circuit and automatically disconnects the circuit if it exceeds safe limits.
- Inductive load protection: measures taken to prevent damage to an inductive circuit or component due to overcurrent, overvoltage, or other abnormal conditions.
- Inductive load protection: the process of protecting inductive circuits from damage due to overcurrent, overvoltage, or other abnormal conditions.
- Inductive load safety: the process of ensuring that an inductive circuit or system operates within safe limits and does not pose a risk to people or property.
- Inductive load sharing relay: a device that monitors the current and voltage in multiple inductive circuits and adjusts them to ensure they are not overloaded.
- Inductive load sharing: distributing the load across multiple inductive circuits in a system to ensure that no one circuit is overloaded.
- Inductive load shedding: the process of reducing the load on an electrical circuit by disconnecting non-essential loads during periods of high demand.
- Inductive load simulation: the process of creating a computer model of an inductive circuit or component to predict its behavior and performance under different conditions.
- Inductive load simulation: the process of using a computer program to simulate the behavior of an inductive circuit or component based on a mathematical model.
- Inductive load simulation: using computer software to simulate the behavior of an inductive circuit or system under different conditions.
- Inductive load stabilization: the process of maintaining a stable current and voltage in an inductive circuit by adjusting the load or the circuit’s parameters.
- Inductive load test: a type of test that uses inductive load to determine the performance of an electrical power system under different load conditions.
- Inductive load tester: a device that simulates an inductive load in an electrical circuit to test its performance and determine the load carrying capacity
- Inductive load testing: the process of testing an inductive circuit or component by applying a load and measuring its performance or properties.
- Inductive load testing: the process of testing an inductive circuit or component by applying a simulated load to it.
- Inductive load testing: the process of testing an inductive circuit or system under different conditions to verify its performance and identify any issues.
- Inductive load transient analysis: the process of analyzing the response of an inductive circuit to sudden changes in load conditions.
- Inductive load transient compensation: the process of adjusting the circuit’s parameters to compensate for sudden changes in load conditions in an inductive circuit.
- Inductive load transient measurement: the process of measuring the response of an inductive circuit to sudden changes in load conditions.
- Inductive load transient modeling: the process of developing mathematical models of an inductive circuit to predict its response to sudden changes in load conditions.
- Inductive load transient protection: measures taken to prevent damage to an inductive circuit or component due to sudden changes in load conditions.
- Inductive load transient simulation: the process of creating a computer model of an inductive circuit to predict its response to sudden changes in load conditions.
- Inductive load transient stabilization: the process of maintaining a stable current and voltage in an inductive circuit during sudden changes in load conditions.
- Inductive load transient: a sudden change in the current or voltage in an inductive circuit, caused by a change in the load or system conditions.
- Inductive load: a device or component that consumes energy from an inductive circuit, such as an electric motor or a transformer.
- Inductive load: a device or component that consumes power in an inductive manner, such as a motor or transformer.
- Inductive load: a load in an electrical circuit that is primarily inductive in nature, such as a transformer or an inductor
- Inductive load: an electrical load that is primarily resistive in nature, such as an incandescent light bulb or an electric heating element.
- Inductive load: any circuit or component that inductively consumes power.
- Inductive logic gate: a type of logic gate that uses electromagnetic induction to perform Boolean logic operations
- Inductive loop antenna : an antenna that uses the principle of electromagnetic induction to detect metal objects passing through it, typically used in vehicular traffic control and industrial automation applications.
- Inductive loop antenna: an antenna that uses electromagnetic induction to transmit or receive radio frequency signals over a specific frequency range.
- Inductive loop detector: a device that uses the principle of electromagnetic induction to detect vehicles crossing a loop of wire embedded in a road surface.
- Inductive loop detector: a device used to detect the presence of metal objects such as vehicles, typically used in traffic control systems and parking garages.
- Inductive loop system: a system that uses an inductive loop detector and a transponder to provide information such as vehicle detection, traffic counting, and vehicle classification.
- Inductive loop: a coil of wire that creates a magnetic field when an electric current is passed through it.
- Inductive loop: a loop of wire used in inductive sensing, traffic detection and other applications
- Inductive loop: a type of inductive sensor used to detect metal objects, typically used in vehicular traffic control and industrial automation applications.
- Inductive maintenance: the process of inspecting, repairing, or replacing an inductive circuit or component to ensure proper operation.
- Inductive noise: unwanted high-frequency signals that can be present in an inductive circuit or component.
- Inductive pick-up sensor: a type of sensor that uses electromagnetic induction to detect the position of a metallic object in a non-contact manner.
- Inductive position sensor: a sensor that uses the principle of electromagnetic induction to detect the position of a metallic object
- Inductive position sensor: a type of sensor that uses inductive principles to determine the position of an object or material.
- Inductive power factor correction: the process of improving the power factor in an inductive circuit by adjusting the load or the circuit’s parameters.
- Inductive power factor: the ratio of real power to apparent power in an inductive circuit or component.
- Inductive power factor: the ratio of real power to apparent power in an inductive circuit.
- Inductive power link: a device that uses electromagnetic induction to transmit power wirelessly over short distances
- Inductive power loss: the loss of power due to the resistance of the wire and core material in an inductor, measured in watts (W)
- Inductive power loss: the loss of power that occurs in an inductive circuit or component due to resistance, reactance, or other factors.
- Inductive power measurement: the process of measuring the power in an inductive circuit by sensing the electromagnetic field produced by the current and voltage.
- Inductive power transfer system: a system that uses electromagnetic induction to transfer power wirelessly.
- Inductive power transfer: a method of transmitting electrical power using electromagnetic induction, typically used for wireless charging of devices.
- Inductive power transfer: a method of wirelessly transmitting electrical power using electromagnetic induction
- Inductive power transfer: the wirelessly transferring power using the principle of electromagnetic induction.
- Inductive probe: a device used to measure the properties or performance of an inductive circuit or component, typically used in testing and diagnostic applications.
- Inductive proximity sensor circuit: an electronic circuit that uses an inductive proximity sensor to detect the presence of a metallic object.
- Inductive proximity sensor: a device that uses the principle of electromagnetic induction to detect the presence of an object or material, typically used in industrial automation and control applications.
- Inductive proximity sensor: a sensor that uses the principle of electromagnetic induction to detect the presence of a nearby metallic object
- Inductive proximity sensor: a sensor that uses the principle of electromagnetic induction to detect the presence of nearby metal objects.
- Inductive proximity sensor: a sensor that uses the principle of inductive coupling to detect the presence of metal objects.
- Inductive proximity sensor: a type of inductive sensor that is used to detect the presence of metallic objects in close proximity.
- Inductive proximity sensor: a type of sensor that uses inductive coupling to detect the presence of a metallic object.
- Inductive proximity switch: a switch that uses the principle of electromagnetic induction to detect the presence of a metallic object
- Inductive proximity switch: a switch that uses the principle of inductive coupling to detect the presence of a metal object.
- Inductive reactance: resistance that an inductor presents to an alternating current.
- Inductive reactance calculator online: a tool available online for calculating the reactance of an inductor for a given frequency.
- Inductive reactance calculator: a tool for calculating the reactance of an inductor for a given frequency.
- Inductive reactance calculator: a tool or software used to calculate the inductive reactance of a circuit or component
- Inductive reactance calculator: a tool used to calculate the reactance of an inductor for a given frequency.
- Inductive reactance equation: another term for the inductive reactance formula.
- Inductive reactance formula: the mathematical equation used to calculate the reactance of an inductor.
- Inductive reactance formula: the mathematical formula used to calculate the reactance of an inductor for a given frequency.
- Inductive reactance frequency: the frequency at which the inductive reactance of a circuit or component is measured.
- Inductive reactance frequency: the frequency of alternating current at which the reactance of an inductor is at its highest.
- Inductive reactance unit: the unit of measurement for inductive reactance, typically given in ohms (Ω).
- Inductive reactance: the opposition to AC current flow in an inductive circuit, measured in ohms (Ω)
- Inductive reactance: the opposition to alternating current flow in an inductive circuit, measured in ohms.
- Inductive reactance: the opposition to alternating current in an inductive circuit due to the inductance of the circuit. It is measured in ohms (Ω)
- Inductive reactance: the opposition to the flow of alternating current in an inductive circuit or component, caused by its self-inductance.
- Inductive reactance: the opposition to the flow of alternating current in an inductive circuit, measured in ohms (Ω)
- Inductive reactance: the opposition to the flow of alternating current in an inductive circuit, measured in ohms.
- Inductive reactance: the opposition to the flow of alternating current in an inductor, caused by the inductor’s ability to store energy in its magnetic field.
- Inductive ripple: the variation of the current or voltage in an inductive circuit or component caused by the self-inductance.
- Inductive sensing: a method of detecting changes in a magnetic field using an inductive sensor.
- Inductive sensing: a method of sensing the position or motion of an object using electromagnetic induction.
- Inductive sensing: a technique for detecting the presence or position of an object or material using inductive principles.
- Inductive sensor circuit: an electronic circuit that uses an inductive sensor to detect changes in a magnetic field
- Inductive sensor circuit: the electrical circuit used to interface an inductive sensor with a control system.
- Inductive sensor: a device that uses inductive principles to measure or detect changes in a physical or electrical property.
- Inductive sensor: a device that uses the principle of electromagnetic induction to measure the properties or performance of an object or material, typically used in industrial automation and control applications.
- Inductive sensor: a sensor that uses the principle of electromagnetic induction to detect changes in a magnetic field
- Inductive sensor: a sensor that uses the principle of inductive coupling to detect changes in a magnetic field.
- Inductive sensor: a type of sensor that uses electromagnetic induction to detect the presence or position of an object.
- Inductive shielding: the use of a conductive material or barrier to protect an inductive circuit or component from interference or noise.
- Inductive signal filter: a type of electronic filter that uses electromagnetic induction to remove unwanted signals from a circuit
- Inductive signal transmission: a method of transmitting an electrical signal over a distance using electromagnetic induction.
- Inductive signal transmission: a method of transmitting electrical signals using electromagnetic induction
- Inductive signal: a signal that changes its amplitude or frequency in response to a change in the magnetic field of an inductor, as in an inductive sensor.
- Inductive speed sensor: a type of inductive sensor that is used to measure the rotational speed of a metallic object.
- Inductive strain sensor: a type of sensor that uses electromagnetic induction to measure the strain or deformation in a metallic object.
- Inductive temperature sensor: a type of sensor that uses the principle of electromagnetic induction to measure the temperature of a metallic object.
- Inductive testing: the process of measuring the properties or performance of an inductive circuit or component.
- Inductive throttle position sensor: a type of sensor that uses electromagnetic induction to measure the position of the throttle in an internal combustion engine.
- Inductive time constant: the time it takes for the current in an inductive circuit or component to reach 63.2% of its final value after a step change in voltage.
- Inductive time constant: the time it takes for the current in an inductive circuit to reach 63.2% of its final value after a change in voltage.
- Inductive time constant: the time it takes for the current in an inductive circuit to reach 63.2% of its final value after a step change in voltage.
- Inductive timing: a method of determining the position of a rotating shaft using an inductive sensor.
- Inductive transducer: a device that converts a change in a magnetic field into an electrical signal.
- Inductive transformer: a device that transfers energy from one inductive circuit to another by electromagnetic induction.
- Inductive transformer: a device that uses the principle of electromagnetic induction to convert one AC voltage level to another.
- Inductive transformer: a device that uses the principle of electromagnetic induction to transfer energy between two circuits.
- Inductive transient response: the response of an inductive circuit to a step change in voltage or current.
- Inductive voltage divider: a circuit that uses electromagnetic induction to divide a high voltage input into a lower voltage output.
- Inductive voltage drop: the voltage difference across an inductor due to its self-inductance.
- Inductive voltage drop: the voltage drop across an inductor caused by the resistance of the wire used to make the coil.
- Inductive voltage drop: the voltage drop across an inductor due to its inductive reactance.
- Inductive voltage measurement: the process of measuring the voltage in an inductive circuit by sensing the electromagnetic field produced by the voltage.
- Inductive voltage regulator: a device that uses an inductor to regulate the voltage of a power supply.
- Inductive voltage sensor: a type of sensor that uses electromagnetic induction to measure the voltage in an electrical circuit.
- Inductive voltage transformer: a device that uses the principle of electromagnetic induction to measure the voltage in a circuit, typically used in power systems applications.
- Inductive voltage transformer: a type of transformer that uses electromagnetic induction to step up or step down the voltage in an electrical circuit
- Inductive voltage: the voltage across an inductor caused by the change in current flowing through it.
- Inductor coil: a coil of wire wound around a core, used to create an inductor.
- Inductor color code: a standard color code used to identify the value of an inductor.
- Inductor core: a material placed inside an inductor coil to increase its inductance.
- Inductor in parallel: an inductor connected in parallel with other components in a circuit.
- Inductor in series: an inductor connected in series with other components in a circuit.
- Inductor: a passive electrical component that stores energy in a magnetic field when electric current flows through it.
- Inductor: a passive electronic component that stores energy in a magnetic field when electric current flows through it
- Inductor-capacitor (LC) circuit: a circuit that contains both an inductor and a capacitor.
- Iron core inductor: an inductor that uses a magnetic core made of iron.
- Iron-core inductor: an inductor that has a ferromagnetic core, typically made of iron or steel
- Lenz’s law: a law stating that the induced current in a conductor will always oppose the change in the magnetic field that caused it.
- Magnetic anisotropy: the property of a material that causes its magnetic properties to vary depending on the direction in which it is magnetized.
- Magnetic circuit: a path followed by the magnetic flux in a magnetic system, similar to an electrical circuit.
- Magnetic core: a material placed in a magnetic circuit to increase the magnetic field strength and improve energy transfer.
- Magnetic damping: the reduction of oscillations in a magnetic system due to energy loss to the surroundings.
- Magnetic domains: regions within a ferromagnetic material that are magnetized in the same direction.
- Magnetic energy: energy stored in a magnetic field, measured in joules.
- Magnetic field intensity: the force per unit current-carrying conductor in a magnetic field, measured in amperes per meter.
- Magnetic field lines: imaginary lines that represent the direction of the magnetic field at a given point.
- Magnetic field strength: the force per unit charge on a moving charge in a magnetic field, measured in Teslas.
- Magnetic flux density: the magnetic flux per unit area, measured in teslas.
- Magnetic flux: the total number of magnetic field lines passing through a given area, measured in Webers.
- Magnetic force microscope (MFM): an instrument used to measure the strength and direction of magnetic fields at the nanoscale.
- Magnetic force: the force experienced by a moving charge in a magnetic field, measured in newtons.
- Magnetic hysteresis: the phenomenon in which a material’s magnetization lags behind an applied magnetic field, resulting in a hysteresis loop when the field is varied.
- Magnetic levitation: the phenomenon of an object being suspended in mid-air with the help of magnetic fields.
- Magnetic materials: materials that exhibit a magnetic field when magnetized.
- Magnetic moment: a measure of the strength and orientation of a magnet, measured in ampere-meters.
- Magnetic particle inspection (MPI): a non-destructive testing technique that uses magnetic fields and iron particles to detect surface and subsurface defects in ferromagnetic materials.
- Magnetic permeability: a measure of a material’s ability to support a magnetic field, similar to electrical conductivity.
- Magnetic reluctance: the opposition to magnetic flux in a magnetic circuit, similar to electrical resistance.
- Magnetic resonance imaging (MRI): a medical imaging technique that uses a magnetic field and radio waves to produce detailed images of the body’s internal structures.
- Magnetic shielding: the practice of using a magnetic material to block or redirect a magnetic field.
- Magnetic susceptibility tensor: a mathematical representation of how a material’s magnetic susceptibility varies depending on the direction of the applied magnetic field.
- Magnetic susceptibility: a measure of a material’s tendency to become magnetized in response to an applied magnetic field.
- Magnetic torque: the rotational force experienced by a current-carrying conductor in a magnetic field, measured in newton meters.
- Mutual inductance: a measure of the degree of inductive coupling between two circuits.
- Mutual inductance: the inductance between two circuits or components caused by a mutual coupling of their magnetic fields
- Mutual inductance: the phenomenon where the change in current through one inductor induces a voltage across a second inductor.
- Mutual inductance: the property of two or more inductors by which a change in current in one induces an electromotive force in the others.
- Mutual inductance: the property of two or more inductors that causes the current in one inductor to induce a voltage in the other inductor.
- Permeability: a measure of a material’s ability to support a magnetic field.
- Saturation point: the point at which an inductor can no longer store energy in its magnetic field, and the current flowing through it is limited by the resistance of the wire.
- Self-inductance: a measure of the inductance of a circuit or component in isolation.
- Self-inductance: the inductance of a circuit or component caused by the presence of a magnetic field within the circuit or component
- Self-inductance: the phenomenon where the change in current through an inductor induces a voltage across the same inductor.
- Self-inductance: the property of an inductor by which a change in current induces an electromotive force within the same circuit.
- Self-inductance: the property of an inductor that causes it to oppose any change in the current flowing through it.
- SI unit for inductance: henry (H)
- Symbol for henry: H
- Variable inductor: an inductor that can have its inductance adjusted.