How deep the current actually goes: as frequency rises the current crowds to the conductor’s surface, and at the depth δ its density has fallen to 1/e of the surface value.
δ = √(2 ÷ (ωμσ)) = √(ρ ÷ (πfμ0μr)) under the material state you select — the state is part of every result.
Skin depth δ is the depth at which a conductor’s current density falls to 1/e (≈ 36.8%) of its surface value — J(x) = J0·e−x/δ (Book One B, Chs 1 and 3, definitional form; Book Five, Ch 42, and Book Nine, Ch 10 state the same gloss). The relation stands in the books as one identity under two forms — δ = √(2 ÷ (ωμσ)) and δ = √(ρ ÷ (πfμ0μr)), with ρ = 1 ÷ σ — stated across nine books; this tool computes both forms and shows them agreeing. Every instance is state-indexed — material, its ρ or σ state, frequency, and temperature where stated — and a δ returned without its material state is not returned. The verified instances the states above rest on: Book One B’s §12.3.1 table (headed “Copper, 20 °C”) prints 9.22 mm at 50 Hz, 8.41 mm at 60 Hz, 2.06 mm at 1 kHz, 0.65 mm at 10 kHz, 0.21 mm at 100 kHz, 0.065 mm at 1 MHz — the table states its header state but not the resistivity its values rest on, and that unstated element is the table’s own unknown component; its 50 Hz value is reproduced exactly by Book Nine’s annealed-copper state (ρ ≈ 1.68 × 10−8 Ω·m, μr ≈ 1: 9.22 mm at 50 Hz, 8.42 mm at 60 Hz). Book One B’s Example 12.7.2, at its stated ρ = 1.724 × 10−8 Ω·m, gives 8.531 mm at 60 Hz, 2.090 mm at 1 kHz, 0.2090 mm at 100 kHz — the table and the example stand within the one book under two documented constraint sets and are not merged. Book Six computes copper at σ ≈ 5.8 × 107 S/m (0.66 µm at 10 GHz, 0.21 µm at 100 GHz) and bounds standard interconnect copper (σ0 = 5.96 × 107 S/m at 20 °C) below 200 nm beyond 500 GHz (≈ 92 nm at 500 GHz). Book Eighteen instances the relation in the telluric identity: at f = 12.5 mHz in continental crust (σ ≈ 10−3 S/m) the depth “exceeds 140 km” — recomputed, 142.35 km; the printed bound verifies. Two documented states stand unsynchronized and are carried here as states, never as this tool’s outputs: Book Two’s Document B prints stock figures (copper ≈ 8.5 mm at 50 Hz and ≈ 7.8 mm at 60 Hz; aluminum ≈ 8.5 mm at 60 Hz, at stated conductor temperatures of 75–90 °C) against recomputation ≈ 9.2 / 8.4 mm for copper and ≈ 10.6 mm for aluminum; and Book Seven’s crust instance (Ch 34) prints δ ≈ 5.03 km at σ ≈ 10−3 S/m, f = 10 kHz, where the book’s own relation at that state gives 159.2 m — 5.03 km is exactly the σ = 10−6 state — while Book Eighteen’s instance at the same conductivity, eleven books later, verifies. Book Seven’s enclosure bound (δ < 10 µm at 100 MHz, Ch 42) states no σ; the register’s recomputation at aluminum’s standard conductivity state (σ ≈ 3.5 × 107 S/m, μr = 1) gives 8.51 µm, inside the bound — that σ is the register’s measurement state, not the book’s, and no aluminum resistivity is offered above as a book state; Book Four’s QED document instances aluminum at 50 Hz ≈ 11.7 mm, consistent with the relation across aluminum’s standard range, likewise without stating a ρ this tool could preset. Book Thirteen states the strand in reduced form — δs ∝ ω−1/2, its material elements unstated; the proportionality is exact inside the full relation and is recorded here as the strand’s reduced state, not completed into a statement the book did not make. Every documented instance stands at μr ≈ 1; no examined book states a μr above 1 for a named material, so μr is carried as the relation’s stated input — a value above 1 is your own state, and the result names it so.
Book One B’s shell form, at the material state and frequency above: the annulus of depth δ carries the current.
Book One B (§12.3) states the shell form where δ ≪ r0: the effective area is the annulus Aeff ≈ 2π r0 δ, the resistance of that hollow shell is Rac ≈ ρL ÷ (2π r0 δ), and against Rdc = ρL ÷ (π r0²) the ratio is Rac ÷ Rdc ≈ r0 ÷ (2δ) — restated in Ch 18 for r0 ≫ δ. Rac therefore rises as √f. The same passage names the form’s limit: proximity effect — a neighboring conductor’s field displacing the current distribution — raises the effective resistance beyond the skin-effect value alone; this section computes the skin-effect form, and the proximity state of a real bundle is a design figure confirmed for the installation.
The same relation inside Book Nine’s shielding-effectiveness identity: a wall’s absorption loss, at the material state selected above.
Book Nine carries the skin-depth relation inside its shielding-effectiveness identity: the absorption loss of a wall of thickness t is A = 8.686 · (t ÷ δ) dB, equivalently A = 8.686 · t · √(πfμσ) — the 8.686 is the decibel state of the same 1/e fall (20 · log10 e). This mode returns the absorption component, the form Book Nine states; a complete shielding figure for a specific enclosure — seams, apertures, the panel it lands in — is confirmed for the installation.
The schema every figure on this page stands in: a material identity, its σ/ρ pair bound by ρ = 1 ÷ σ, and a temperature state — the elements that make a value deterministic rather than probabilistic.
| Material (definition) | Source | σ | ρ | Temperature state |
|---|---|---|---|---|
| Silicon (Intrinsic) | Book One B, Ch 12 table | 4.35 × 10−4 S/m | 2.30 × 103 Ω·m | Headed “at 20 °C” — the pair exact as a reciprocal pair at its stated temperature |
| Silicon (Intrinsic) | Book One B, Ch 18 summary table | 4.35 × 10−4 S/m | 2.30 × 103 Ω·m | Table headed 20 °C; the silicon row carries its own label, 25 °C — the same pair |
| Silicon (Intrinsic) | Book One B, Ch 11 | σ ≈ 4.3 × 10−4 S/m | not restated | — |
| Silicon (Intrinsic) | Book One A, one table | bound to its table’s stated σ by ρ = 1 ÷ σ | 640 Ω·m | UNSTATED in any passage — the value stands probabilistic within Book One A; neither of its two values is adopted over the other |
| Silicon (Intrinsic) | Book One A, two tables | bound to its tables’ stated σ by ρ = 1 ÷ σ | 2300 Ω·m | UNSTATED in any passage — the value stands probabilistic within Book One A; neither of its two values is adopted over the other |
The schema of a material-resistivity statement, as the books give it: a material identity under a stated definition (“Silicon (Intrinsic)”), a σ/ρ pair bound by the law ρ = 1 ÷ σ, and a temperature state — the three elements that make a traced value deterministic rather than probabilistic. Book One B states the silicon pair resolved, twice, with temperature (the table above). Book One A states the same identity with the temperature unstated in any passage — the schema’s founding unknown component — and with two values standing, 640 Ω·m in one table and 2300 Ω·m in two, each internally consistent with its stated σ; neither is adopted over the other, and within Book One A the value stands probabilistic until a temperature state is established. Book One B supplies, in its own text, the temperature element Book One A’s passages omit; the books are not merged — the correspondence is recorded, and One A’s values remain probabilistic within One A. For Books Four through Eight the registers stand in two recorded states — those books’ own passes record no counterpart element, while Book Thirteen’s register records silicon-resistivity values in them in Ω·cm states — and the schema adopts neither state for those positions. The word’s later standings — Book Sixteen’s superconductor class defined by ρDC = 0 below Tc, Book Eighteen’s flux-flow resistivity ρff — are different identities under the same word, recorded at their places, not members of this pair.