Processing Speed Calculator

Build the rate from the processor’s parameters — then solve work = rate × time.

instructions / cycle
cores
—

Work = rate × time

Enter any two — the third is worked out. The rate is the one built above; edit it directly and it holds until the builder changes.

Work = rate × time, in operations: the same relation the Data Transfer Calculator uses for bits. A CPU’s rate is clock × instructions per cycle × cores; IPC depends on the workload, so a CPU figure here is an estimate from the entered parameters, never a chip rating. A GPU’s floating-point rate is lanes × clock × operations per lane per clock — a fused multiply-add counts as 2 operations, so FP32 runs at 2; other precisions scale from the manufacturer’s published ratios, which you enter yourself. An FPGA has no fixed IPC: its rate is the parallelism of the design loaded into it, so its figure is a property of the design, not of the chip alone. The clock period is exact: period = 1 ÷ frequency. Rates built here are arithmetic from the entered parameters — a planning estimate, not a measured benchmark.

For the figures: select a field, then tap the keys — or type as usual.