Josephson Relations

The constants of the superconducting substrate, computed at the digit states the books state them in: a voltage step locked to a drive frequency, a flux counted in quanta, and the energy of a single flux quantum switching — every result names the state of the constant it stands in.

The Voltage–Frequency Relation

V1 = f ÷ KJ — Book Seven, Ch 46’s worked form; the same identity by the flux form, V1 = f · Φ0, stands beside it. The two constant-state lists are the suite’s states: every section below computes at the states selected here.

—

The relation is one identity in two forms: KJ = 2e/h converts a drive frequency to the voltage step it locks to, V1 = f ÷ KJ, and Φ0 = h/2e = 1/KJ states the same identity as a flux. Book Three, Ch 21 (in both of the book’s lines) defines both constants exactly — KJ = 483.597848 GHz/mV = 483,597.8484 GHz/V — and Book One B states KJ in its Chs 1, 2, and 16. Book Seven, Ch 46 derives the constant from its stated exact h and e (483597.848416984… × 109 Hz/V) and works the conversion this section computes: at fm = 75 GHz the step is V1 ≈ 155.1 µV — recomputed, 155.088 µV, the figure this tool returns at the exact state. In Book Sixteen the same relation stands in the metrological orientation — the voltage standard, V = (h/2e)·fJ, locking voltage to frequency — inside §10.6.1’s QUANTUM REFERENCE BENCHMARKS table, which prints KJ at the shortened standing in the list above (483,597.8 GHz/V, the constant’s correct rounding at one decimal) and beside it the table’s other members: RK = h/e² = 25812.807 Ω and ΔνCs = 9192631770 Hz. That table stands in the registry as its own reference schema (Entry 42); its resistance and frequency members are carried here as the standing’s source, not as outputs of this tool — this tool computes the Josephson members. Book Nineteen states neither KJ nor RK: the constants’ metrological family does not stand there, while the device family saturates the book (the flux note below).

Flux in Units of Φ0

Φ = N · Φ0 at the Φ0 state selected above — the quantum is the unit, and the count and the flux convert through it.

quanta
—

Φ0 = h/2e is stated exactly in Book Three, Ch 21 and five times in Book Seven, and it travels between the books in rounded and truncated states, each carried in the list above under its own name: 2.0678 × 10−15 Wb (Book Four’s QED document, Ch 12; Book Six, Ch 12; Book Seven, Ch 13; Book Eight, Ch 37); ≈ 2.07 × 10−15 Wb (Book Five; Book Eight, Ch 34); 2.067 × 10−15 Wb, the truncation at four significant figures (the rounding would be 2.068 — Book Sixteen, §10.6.1; Book Nineteen, §45.6.1); and 2.067833 × 10−15 Wb, the truncation at seven (the rounding would be 2.067834 — Book Nineteen, §13.3.3). A figure computed under a state is returned under that state’s name — no book’s rendering is substituted for another’s. Book Eighteen states the quantum in the device orientation — quantized flux in discrete integer multiples of Φ0 ≈ 2.0678 × 10−15 Wb (§5.4.1) — with the flux-qubit bias at Φext = Φ0/2 and a sensor resolution below ~ 10−4 Φ0/√Hz (§5.5.1) among its device standings. Book Nineteen carries the strand at its fullest recent extent (Josephson 19 standings; SQUID 9): fluxoid quantization as an interconnect precept (§§13.3.3, 28.6), the RCSJ equation and Josephson inductance (Ch 19), SFQ clock trees (Ch 20), fluxon tokens (§45.6.1) — and states Φ0 at all nine digits at §19.2 (2.067833848 × 10−15 Wb, the exact-digit form standing in the strand’s later run, where Sixteen carried the truncation and Eighteen the rounded state). Two digit forms stand recorded and NOT adopted as this tool’s basis: Book Seven, Ch 2 prints Φ0 ≈ 2.06783838 × 10−15 Wb, an isolated digit state against that book’s own five exact statements; and Book Nineteen, §28.6 prints 2.067839 × 10−15 Wb, neither a rounding nor a truncation of the exact value at any precision, held out of the test set with its unknown component marked in the register — both are carried here as states; the tool’s test basis is the exact definitional value. The symbol also stands in other identities, separated by their passages’ own definitions and never this constant: Book Eight, Ch 2’s Φ0 is Richardson’s permeability pre-exponential in thermionic emission, and Book Nineteen, Ch 9’s |Φ0⟩ is a many-body vacuum state.

SFQ Switching Energy

ESFQ = Ic · Φ0 (Book Three, Ch 21) at the Φ0 state selected above, with Book Five’s beside form EJ = ℏ · Ic ÷ (2e) (Ch 45) carried labeled beside it — the two forms stand beside each other and are not merged.

—

Book Three, Ch 21 states the SFQ switching energy ESFQ = Ic · Φ0; its 4049 line instances it at Ic = 100 µA: E = 2.07 × 10−19 J = 0.207 aJ, exact from the definitional Φ0 — the figure this section returns at the exact state (2.067833848 × 10−19 J = 0.2068 aJ at full precision). Book Five, Ch 45’s diagram states the Josephson energy in the beside form EJ = ℏ · Ic ÷ (2e), differing from Ic · Φ0 by exactly 2π; the passage glosses both at ≈ 10−19 J. The two forms stand beside each other as documented states — this tool carries both, labeled by their passages, and does not merge them. Book Five’s reduction claim stands in both its states: its ESFQ ≈ 10−19 J as 105× below ECMOS ≈ 10−14 J is synchronized with Five’s own rounded ESFQ state; against the exact product the factor is 4.8 × 104 (the claim’s correspondence is recorded at Entry 34). Book Sixteen states no SFQ at all — the energy member does not return with the constants there — and Book Nineteen, whose SFQ standings are pervasive in the device identity (clock trees, soliton solutions, logic blocks), states no ESFQ numeric instance: the energy relation stands on Three’s and Five’s statements. Two of Eighteen’s device standings are carried here as documentation, not built as calculators, on the registry’s determination: the RCSJ equation is named at §8.6.1 (and again in Book Nineteen, Ch 19) without a relation at entry granularity, and §9.6.2’s Superconducting Josephson Array row (1.5 × 10−22 J/bit) is a table value whose passage states no recompute givens — a standing, not a test value.

For the figures: select a field, then tap the keys — or type as usual.