Displacement current in a dielectric, and the power a coaxial line carries — worked as Book Two, Document A works them, in Examples 2.1 and 2.3: each example at its own stated state, each current and power returned by both of the book’s paths, and every figure returned with the state it was computed in.
Jd = ωD in the dielectric, with D = ε0εrE and E = V/d — Book Two, Document A, Example 2.1. The displacement current is returned by the field path, Id = Jd·A, and by the circuit path, I = ωCV0 — the book’s own check of one path against the other.
The relations as Book Two, Document A, Example 2.1 works them: the field in the dielectric is uniform, E = V0/d; the flux density follows, D = ε0εrE; the displacement current density is Jd = ωD, and its integral over the plate is the displacement current, Id = Jd·A. The book checks that current by the circuit path: with C = ε0εrA/d, the same current stands as I = ωCV0 — the two paths are shown together here, as the book shows them, and they agree identically. The magnetic field inside the dielectric at radius r stands as Hφ(r) = (r/2)·Jd, stated within the plate’s radius; this tool computes with ε0 = 8.8541878128 × 10−12 F/m, named here as the tool’s constant state. At the example’s stated state the book prints E = 50,000 V/m; D = 1.7708375 × 10−6 C/m²; Jd = 111.267 A/m²; C = 1.39080 × 10−10 F; Id = 0.87389 A by the field path and 0.87390 A by the circuit path; and Hφ(0.025 m) = 1.39084 A/m — the tool’s figures stand at their own precision beside the book’s printed set.
S = E × H integrated over the dielectric’s cross-section is the power the line carries — Book Two, Document A, Example 2.3. The fields stand as coefficients over r: E(r) = [V0/ln(b/a)]/r, H(r) = [I0/2π]/r, S(r) = the coefficients’ product over r²; the power is returned by the integrated form and by the book’s terminal check, P = V0I0, shown together.
The example stipulates V0 = 100 V and I0 = 2.0 A independently — a stated condition of the example, recorded in the census as context, not a defect: their ratio is 50 Ω while the line’s computed Z0 stands at 51.84 Ω in the book’s print. Both terminal quantities are givens, every printed result follows correctly from them, and this tool takes V0 and I0 exactly as you state them — it does not adjust one to the other to force the ratio onto Z0. The characteristic impedance is computed with η = 376.73 Ω, the free-space impedance as the book states it. The example’s figures stand on the ratio b/a = 3.5; the individual radii are your stated inputs, and the defaults a = 1 mm and b = 3.5 mm stand as a measurement state, recorded as such: any radii at that ratio return the example’s coefficients, power, and impedance unchanged — the radii govern only the radius at which the fields are evaluated. At the example’s stated state the book prints ln(3.5) = 1.252763; the E coefficient 79.8236; the H coefficient 0.31831; the S coefficient 25.4087; P = 200.00 W; and Z0 = 51.84 Ω — the tool’s figures stand at their own precision beside the book’s printed set.