Coupled Inductance

Two magnetically coupled inductors on a planar core — their coupling, leakage, matrix, stored energy, and turn-off spike — worked as Book Two, Document B works them in Worked Example 1: the example’s matrix and currents stated in full, and every figure returned with the state it was computed in.

The Coupled Pair — Coupling, Leakage, and the Matrix

The pair’s matrix stands as L = [[L1, M], [M, L2]]. State the self-inductances and either the mutual inductance M or the coupling coefficient k; the tool returns the other, with 1 − k², det(L), the leakage pair, and the matrix’s eigenvalues.

µH
µH
µH
—

The relations as Book Two, Document B, Worked Example 1 works them: the pair’s matrix stands with the self-inductances on the diagonal and M off it; the coupling follows from the matrix elements, 1 − k² = det(L)/(L1L2), and M = k√(L1L2); the leakage of each winding stands as its uncoupled fraction, Lℓ = L(1 − k); and the matrix’s eigenvalues are its principal inductances. The example states its matrix and currents in full — no element of it is unstated, and none is supplied here. At the example’s stated state the book prints 1 − k² = 0.0400 (worked as 8.80/220.0); k = 0.979796; M = 56.285 µH; leakage 4.445 µH / 0.303 µH; det(L) = 132.0 µH² (M² = 0.96 × 3300 exactly); and eigenvalues 234.437 / 0.563 µH — the tool’s figures stand at their own precision beside the book’s printed set. This calculator is the coupled-circuit member of the books’ magnetic family, standing beside the Magnetic Strength (Gauss) Calculator’s field calculations.

Stored Energy at a Stated Current Pair

W = ½(L1i1² + 2Mi1i2 + L2i2²) at the current pair you state, with the pair’s matrix as stated above and the currents’ signs carried as stated — the example’s pair stands at (12 A, −42 A).

A
A
—

The cross term carries the currents’ signs as stated, so a pair stated in opposition stores less than the sum of its windings’ separate energies. At the example’s stated pair (12 A, −42 A) the book prints W = 702 µJ.

Turn-Off Spike at Winding 1

V = Lℓ1·Δi/Δt at the current change you state, with Lℓ1 taken from the pair as you state it above.

A
ns
—

The example prints the spike — 2133.6 V — and its leakage; it does not state Δi and Δt separately in the material this tool is built on. The defaults Δi = 12 A and Δt = 25 ns therefore stand as a measurement state, disclosed as such: what the printed spike and the leakage jointly fix is the rate, Δi/Δt = 480 A/µs, and any pair at that rate returns the same spike at the example’s leakage. (12 A is the example’s stated primary current; that it is the interrupted current is not stated, and the tool does not claim it.) At that rate the book’s printed 2133.6 V stands on its rounded leakage, 4.445 µH; the tool multiplies at full precision beside it.

For the figures: select a field, then tap the keys — or type as usual. The ± key sets the sign of the figure in the field.