A multisection quarter-wave matching network whose section reflection coefficients follow the binomial coefficients — Book Two, Document A, Example 9.2’s design, computed at the design state you enter: the section impedances, the Γ set, and the fractional bandwidth, every figure returned with its state.
A = 2−n · ln(RB/Z0); Γk = C(n,k) · A, symmetric over the junctions; each section a quarter wavelength at f0. The design state entered here governs both sections of this tool, and travels with every figure it returns.
The synthesis as Book Two, Document A, Example 9.2 works it: the coefficient A = 2−n · ln(RB/Z0) distributes over the n + 1 junctions by the binomial coefficients, Γk = C(n,k) · A, symmetric first to last; each junction step is a log step, ln(Zk+1/Zk) = Γk, so the section impedances follow by the log-distribution formula, and the same set follows again by the symmetry identities — the middle section at √(Z0 · RB), each mirrored pair multiplying to Z0 · RB. The book’s own terminal check is the closure: the steps land on RB exactly, and the set that closes on the load is the example’s final synthesis — at the example’s state, the set the book prints as Z1 = 40.88 Ω, Z2 = 22.36 Ω, Z3 = 12.23 Ω, closing on RB = 10.00 Ω, which this tool returns at its full precision (Z1 = 40.888 Ω). Each section is a quarter wavelength at f0 — an electrical length; the example states no velocity factor for a line, so no physical section length is computed here.
A recorded state of the source passage, carried as documentation and NOT adopted: Example 9.2 as printed retains two superseded, incorrect passes beside its final synthesis. A first synthesis reads the junction step as ln(Zn+1/Zn) ≈ 2Γn — double-counting the factor 2 against the book’s own definition of Γn — and gives Z1 = 33.44 Ω before breaking off; a stray re-evaluation gives Z1 = 50 · e−0.148 ≈ 43.12 Ω, its exponent following from nothing in the example; and the example’s architecture diagram prints the set Z1 = 43.1 Ω, Z2 = 22.4 Ω, Z3 = 11.6 Ω — matching the incorrect 43.12 Ω pass, not the final synthesis. Those figures stand in the passage as its other state; this tool computes the final synthesis, the set that closes exactly on the load, and no superseded figure is ever its output.
The band over which the design’s reflection response stays at or below your stated tolerance Γm, at the design state entered above — the response of the binomial distribution, |Γ(θ)| = |A| · (2 cos θ)n, with θ = (π/2) · (f/f0).
Book Two’s example states the bandwidth at its design state directly: fractional bandwidth 29.81% (Δf = 1.729 GHz; band 4.9355–6.6645 GHz). The tolerance Γm at which those band edges stand is not stated in the passage as the registry documents it — the element is unstated at entry granularity, and nothing is filled for it. The default Γm = 0.0201 above is a measurement state, recorded as such: it is the tolerance at which this tool reproduces the example’s printed figures (fractional bandwidth 29.81%; Δf = 1.729 GHz) from the documented response form, its own band edges standing at its precision beside the book’s printed 4.9355–6.6645 GHz. State your own tolerance and the band is returned at your stated state. No other examined book carries the transformer identity: Books Three through Fourteen hold the name “binomial” only in other precept families (the distribution’s families), and Book Three’s binomial is a differential-evolution crossover operator — a different precept, recorded beside this one, not merged with it.